• 펄프종이기술
• /
• 제46권6호
• /
• pp.94-102
• /
• 2014

The physical and chemical properties of recycled fibers from mixed waste paper are more and more deteriorated because of unknown history of recycling times. In order to improve the mechanical properties of liner paper, the recycled fibers from wasted cotton clothes were used in papermaking process, and their applicabilities were evaluated in several points of fiber modification. Thus, two kinds of fiberizing methods from waste cotton clothes were considered by using rotary sandpaper and grinder mill. Finally, the rotary sandpaper method was relatively desirable in preserving longer fiber length and fibrillated fiber surface. The recycled cotton fibers by swelling treatment with NaOH and bleaching with reductive chemicals were mixed with OCC fibers, and the handsheets were prepared to basis weight of $80g/m^2$ and evaluated the mechanical properties of paper. The fibrous properties showed outstanding results in freeness and WRV improvements by alkali treatment and high brightness by reductive bleaching treatment. The physical and mechanical properties of sheet by mixing OCC fibers and recycled cotton fibers were also highly improved in tensile, burst strength and specially folding resistance.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.8-15
• /
• 2012

Optical property improvements for ONP (old newspaper) and OMG (old magazine) were attempted by application of in-situ $CaCO_3$ formation process on recycled fiber surfaces. Washing treatment of ONP and OMG resulted in 35~40% yield loss for around 6% brightness improvement. Washing plus bleaching process with $H_2O_2$ and FAS (formamidine sulfinic acid) improved brightness and ERIC values a little more with the same amount of yield loss as washing treatment. In-situ $CaCO_3$ formation method improved those optical properties much better than the washing plus bleaching method without loss of yield, and better than the case of adding high brightness PCC up to the same ash level. It can be said that the in-situ $CaCO_3$ formation method may be used as an effective alternative for upgrading optical properties of recycled fibers.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.55-62
• /
• 2015

Paper mulberry fibers have been used as fibrous raw materials for manufacturing traditional handmade paper, hanji for a long time. Compared to wood pulp fibers, pulp fibers from mulberry bast tissue have some benefits in physical and chemical properties due to their high D.P (degree of polymerization), M.W (molecule weight) and long fiber length. Specially, Korean handmade hanji shows outstanding characteristics in mechanical tensile strength, folding endurance, flexibility and long sustainable conservation properties. Therefore, hanji is widely applied to daily supplies, hygienic goods, medical supplies, clothing industries and so on. Recently, the potential demand of mulberry pulp fibers is more and more increased on the strength of high application fields. This study was focused on the possibility of wastewater recycling in unit operation systems for the development of automated mass production line. The properties and environmental loads of wastewater from debarking, cooking, bleaching and screening process were analyzed by means of COD, conductivity, turbidity and solid materials. The wastewater from debarking and cooking process was comparatively high in pollution load, and would be treated by additional approaches of chemico-physical method.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 춘계학술발표논문집
• /
• pp.84-88
• /
• 1999

In chlorine dioxide delignigication or bleaching, chlorate is mainly formed by the reaction between chlorite and hypochlorous acid, thus scavengers of chlorine or hypochlorous acid can be used to reduce the formation of chlorate which is unfavorable to environment. In this study, additives such as sulfamic acid, DMSO, hydrogen peroxide, or sodium chlorite was added to chlorine solution or pure $ClO_2$ solution to check their reactivity with $Cl_2$ and $ClO_2$. These additives were also added directly into general $ClO_2$ solution which contained certain amount of chlorine, then the additive-treated $ClO_2$ solution were used in bleaching stages. The aim of this procedure was to remove the original amount of chlorine that was thought to be possibly the main reason for the formation of chlorate and AOX. The additives were found to be able to eliminate chlorine very fast and selectively, but $H_2$ $O_2$ should be used under pH4, otherwise it also reacts with $ClO_2$. After the additives reacted With $Cl_2$, DMSO turned into an inactive product $(CH_3)_2SO_2$, While Sulfamic acid turned into $HClSO_3H$ that still remained active in oxidation, and $NaClO_2$ produced $ClO_2$. The addition of $HNaClO_2$ showed significant improvement in delignification but the deeper delignification led to higher formation of chlorate. When the additive-treated chlorine dioxide solutions were used in bleaching, both sulfamic acid, DMSO, and hydrogen peroxide showed no significant changes of DE brightness and Kappa number. The formation of chlorate was reduced by addition of sulfamic acid, DMSO and hydrogen peroxide.

• Restorative Dentistry and Endodontics
• /
• 제16권2호
• /
• pp.155-164
• /
• 1991

The purpose of this study was to evaluate the effects of bleaching agent through the dentinal tubules of cervical area in the intracoronal bleaching of pulpless teeth on cutured fibroblast cells. Extracted human incisors were enlarged to # 40 K-file and obturated with gutta-perella and AH 26 sealer. The gutta-percha was removed to 2mm below the cementoenamel junction of the root The teeth were divided into 3 experimental and control groups. Experimental groups; Experimental group 1: Temporary inlay wax filld with 30% $H_2O_2$ in pulp cavity. Experimental group 2: Temporary inlay wax filld with 30% $H_2O_2$ in pulp cavity after placement of ZOE cement to cementoenamel junction. Experimental group 3: Temporary inlay wax filld with 30% $H_2O_2$ in pulp cavity after application of Copalite to cementoenamel junction. Control group: Temporary inlay wax filled without 30% $H_2O_2$ in pulp cavity under the same condition at each experimental group. Each tooth was immersed in well of multidish cultured fibroblast cell for 48 hours. The cellular multiplication and cell viability were calculated at the interval of 1, 3, 5. 7 hours and the morphological changes in well were observed and their photographs were taken with inverted microscope. The obtained results were as follows : CD The cellurar multiplicaton and cell viability decreased in all experimental groups at 1 hour after experiment and the morphology of fibroblast cell was changed from star shape to round (2) The cell viability was lowered to 34 % in experemental group 1, 44 % in experimental group 2, and 38 % in experemental group 3 at 3 hours after experiment (3) The cell multiplication was decreased to 54% in experemental group 1. 47% in experimental group 2, and 40% in experemental group 3 at 7 hours after experiment. (4) The decrease of cell number and morphological changes of fibroblast cell were remarkable in experimental group 1, group 3 and 2 in order. These results suggest that the fibroblast cells receive severe damage by 30% $H_2O_2$ solution leaked through the dentinal tubules and the dentinal tubules are able to be obturated better by ZOE cement than by Copalite.

• 펄프종이기술
• /
• 제34권4호
• /
• pp.30-36
• /
• 2002

This research was conducted to investigate the feasibility of using deinked pulp of white ledger(DIP) for the manufacture of high quality premium tissue. The three types of tissues were prepared using the softener treated bleached DIP, softener treated mixed pulp of unbleached DIP and virgin pulp, and untreated mixed pulp of bleached DIP and virgin pulp, respectively, and their tensile index. softness, and brightness were measured and compared. The bulk and surface softness increased only slightly by the addition of softener(0.2% mineral oil) into the bleached DIP. The tensile index was decreased by 15∼30%, and the brightness was the range of 86% to 87% ISO. The softener(0.2∼0.8% mineral oil or dialkyl imidazoline) treatment of mixed pulp of unbleached DIP and virgin pulp Improved the bulk and surface of tissue considerably. However, the brightness was low as 85% ISO or below. Although the softness of the tissue made from bleached DIP blended with virgin pulp was the lowest among three types of tissues evaluated, its tensile index was the highest and brightness was 87∼88% ISO. Based on the results, it may be predicted that the bleached DIP blended with virgin pulp is the best raw material for the manufacture of high quality premium tissue if softener treatment is applied to mixed pulp, because the softness can be improved by the addition of softener. In general, the softness of tissue was improved with the increase in the amount of softener: However, the tensile index inversely proportional to the amount of softener added. Dialkyl imidazoline was more effective than mineral oil with respect to the improvement in softness, even though the loss in tensile index was severe with the treatment of dialkyl imidazoline.

• 펄프종이기술
• /
• 제35권3호
• /
• pp.74-78
• /
• 2003

The structural property of phenolic and non-phenolic lignin has an effect on the reaction rate of lignin by oxygen and chlorine dioxide respectively. Moreover, the undesirable degradation of cellulose followed by lignin degradation is influenced by chemical charge and reaction time. In this paper, several lignin model compounds were used to illuminate the interaction of oxygen and chlorine dioxide by varying the position of O and D(OD, DO, ODO and DOD), and gas chromatography method was used to investigate the degradation of lignin by determining the content of methoxyl groups in lignin. It was shown that structural properties of lignin models were more influential on the degradation and demethylation of lignin than the above combination. Combination of oxygen and chlorine dioxide, however, was more effective in degradation of lignin than only one stage, and three stages than two stages.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 추계학술발표회 논문집
• /
• pp.143-149
• /
• 2011

In recent, many forest residues have been generated by the National Forest Management Operation. Unfortunately, most of the forest residues are supposed to be used as raw materials for burning fuels like wood pellets. In this study, we investigated whether or not this forest biomass mixed in various ages and species could be used as raw materials for making kraft pulps in a view of optical properties.

• Journal of the Korean Wood Science and Technology
• /
• 제35권6호
• /
• pp.166-174
• /
• 2007

효소 전처리에 의한 침엽수 Kraft 펄프의 표백 효율을 살펴보고자 Trichoderma reesei에서 2종류의 xylanase를 cloning하였다. Cloning된 xylanasel과 xylanaseII 유전자를 E. coli에서 발현시켜 29kDa의 재조합 단백질인 XYNI과 29.5 kDa의 XYNII를 생한하여 정제하였고, Rumicoccus albus로부터 cloning되어 변형된 50kDa의 EGIV-CBDII를 동일한 방법으로 cellulase를 생산 정제하였다. 정제된 효소들을 각각 xylan과 CMC를 기질로하여 효소 활성도를 측정한 결과 XYNI이 XYNII보다 효소활성이 더 높았으며, EFIV-CBDII 또한 높은 활성을 나타내었다. 이렇게 생산 정제된 xylanase와 cellulase를 이용하여 침엽수 Kraft 펄프를 대상으로 연속처리에 의한 biobleaching test를 실시하였다. XYNI을 처리하였을 때 백색도는 29.9% 증가하였고, XYNI를 1차 처리한 후 2차로 EGIV-CBDII를 처리하였을 때 백색도는 1차 처리구에 비해 9.1% 증가하였다. 그 후 3차 XYNI를 처리 하였을 때 2차에 비해 7.3%의 bleaching의 효과를 볼 수 있었다. 또한 Kappa No.는 처리단계에 따라 8.1, 4.6 그리고 3.2% 각각 지속적으로 감소하였다. 이 실험결과를 통해 재조합 효소 XYNI과 EGIV-CBDII를 함께 이용하여 Karft 펄프에 대한 biobleaching의 상승효과를 확인하였다.

• 자원리싸이클링
• /
• 제18권2호
• /
• pp.16-29
• /
• 2009

본고는 펄프 제지산업 폐수에 함유된 오염물질들의 특성과 생물학적 처리기술들에 대해 설명한다. 펄프 제지산업 폐수는 고농도의 생화학적 산소요구량 (BOD)과 화학적 산소요구량 (COD)을 포함하고 높은 독성을 보이며 강한 흑갈색을 띠는 것이 특징이다. 특히, 펄프의 표백공정에서 리그닌의 염소화에 의해 다이옥신, 퓨란과 같은 독성의 유기염소화합물이 형성된다는 것이 알려져있다. 이에 따라 최근 펄프 제지산업은 기존의 표백처리를 무염소공정(TCF)으로 대체하고 있다. 펄프 제지산업 폐수처리에 사용되는 모든 생물학적 기술들은 폐수와 박테리아의 접촉 메커니즘에 기반을 두고 있는데, 이것은 박테리아가 폐수 내 유기물질을 먹이로 이용하여 세포로 전환함으로써 폐수 내 BOD농도를 감소시키는 것이다. 펄프 제지산업 폐수의 생물학적 처리에서 호기성 처리와 혐기성 처리 모두 효과적인 것으로 밝혀졌다. 뿐만 아니라, 최근 곰팡이류를 이용한 생물학적 처리, 생물-응집-여과기법을 혼용한 처리 등도 폐수처리분야에 새롭게 적용되었다. 이러한 기술들로 처리된 폐수를 펄프 제지공정에 재활용함으로써 제조공정의 물소비량을 상당히 감소시킬 수 있다.