• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.49-54
• /
• 2001

This study was carried out to acquire basic data for the bleaching of bamboo chemical pulp. Bamboo chemical pulps (alkaline sulfite (AS)-anthraquinone (AQ) pulp, Kraft pulp) were bleached with two kinds of multistage bleaching methods (CEDED, PDED) using the various kinds of bleaching agents. And, physical properties of bleached pulps were investigated. The conclusions obtained from the results were as follows; The yield of AS-AQ pulp bleached with four-stages bleaching method using the hydrogen peroxide and chlorine dioxide as a bleaching agents was higher than the other bleached pulps. The brightness of kraft pulp bleached with five-stages bleaching method using the chlorine and chlorine dioxide as a bleaching agents was higher than the other bleached pulps. The physical properties of kraft pulp bleached with four-stages bleaching method using the hydrogen peroxide and chlorine dioxide as a bleaching agents was higher than the other bleached pulps.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.65-73
• /
• 2012

Nowadays, the concern on the environmental load of bleaching process gave rise to the process of ECF(elemental chlorine free) and TCF(total clorine free). These sequences are based on oxygen-derived compounds such as oxygen, ozone, and hydrogen peroxide which is used as a typical eco-friendly bleaching agent. In this study, paper mulberry pulp was bleached with hydrogen peroxide and some bleaching process were accompanied with ultrasonication in order to increase the bleaching efficiency. The best bleaching efficiency of paper mulberry pulp was obtained in the condition of hydrogen peroxide and ultrasonication(20 kHz) bleaching system at $45^{\circ}C$ for 30 min. The brightness and kappa number of paper mulberry pulp were gained to 5.09% and 3.52 respectively. and yield was slightly loosed to 2%. Therefore, the efficiency of hydrogen peroxide and ultrasonication bleaching system of paper mulberry pulp was superior to the conventional hydrogen peroxide bleaching system. Magnesium sulfate acted as a bleaching stabilizer for the increasement of yield. As a result, the yield and viscosity were increased to 2.2% and 12% respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.4
• /
• pp.65-71
• /
• 1999

This study was carried out to investigate the effect of xylanase pretreatment of the unbleached hardwood kraft pulp during the conventional Chlorine-Extraction- Hypochlorite (CEH) bleaching on pulp property. Optimum bleaching condition was evaluated by using Novozym produced from the fungus Humicola insolens. Also the effect of chelating agent prior to enzyme treatment was analyzed. The kappa number of enzymatic bleached pulp at the enzyme charge 10 IU/ml was slightly similar to that of bleached pulp without enzyme. By enzyme treatment, the chlorine charge in conventional CEH bleaching process of hardwood KP could be reduced by 17%, while no adverse effect on pulp yield and strength was. The optimum condition for enzyme pretreatment was 10 IU/ml xylanase charge, 3 to 4 hrs treatment, and 2% pulp consistency. In sugar composition in the enzyme pretreated pulp, arabinose and mannose were not much different, but more xylose was retained. This high content of hemicellulose in pulp seems to play an important role in pulp properties. The pulp pretreatment by chelating agent prior to enzyme treatment could improve the enzyme activity and enhance the bleaching effect at 0.2% diethylenetriamine pentaacetic acid (DTPA) charges.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.2
• /
• pp.36-45
• /
• 1997

Newly bleaching sequence using oxygen, ozone and hydrogen peroxide has introduced to avoid pollution hazards from chlorinated organic compounds, because chlorine dioxide substitution bleaching was produced a little chlorinated organic substance. Oxygen-type chemicals replaced for chlorine has attracted much research attention. Bleachability of ozone was improved at low temperature and high pulp consistency. In third bleaching followed OZ bleaching, addition of O2 and NaBH4 in alkali extraction was effective than only alkali extraction. Bleachability of pulps in ozone bleaching(Z) was improved at higher consistency and lower temperature The addition O2 and NaBH4 in alkali extraction after OZ bleaching sequence improved brightness, when compared to those obtained by only alkaline extraction. Pulps bleached by ECF bleaching sequences such as OZEoD and OZEopD was obtained by 90% ISO brightness. The brightness of pulp bleached by TCF sequences with the ozone dosage of 1.6% was approached to target brightness (88~90%ISO). Pulps bleached Z stage combined bleaching sequence was reduced the viscosity to a little greater extent. However, physical properties of pulps was not great different compared to those bleached by conventional bleaching sequences. A pollution index of bleaching effluente by ozone combined bleaching sequences was lower than by conventional bleaching sequence, but somewhat higher than multistage bleaching sequences combined C/D stage.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2010.04a
• /
• pp.195-206
• /
• 2010

Xylan can be applied to improve the strength properties of paper; however the optical properties, such as brightness, are decreased significantly. To solve that problem, an applicable bleaching process is therefore desired. The aim of this research was to investigate the impact of hydrogen peroxide bleaching on hardwood kraft pulp pretreated with birchwood xylan by measuring optical properties (whiteness, brightness, opacity) as well as physical properties (tensile index, tearing index, bulk) of handsheets made from the bleached pulp. Hydrogen peroxide bleaching, as a kind of totally chlorine free (TCF) bleaching method, is quite important industrially for chemical pulp. In our work, the process variables of peroxide bleaching including bleaching temperature, time, initial pH and $MgSO_4$ dosage were studied. The results showed that both good mechanical properties and optical properties could be achieved when the operating parameters were controlled properly and therefore hydrogen peroxide bleaching was proved to be a suitable method for bleaching hardwood kraft pulp with adsorption of birchwood xylan.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.1
• /
• pp.52-61
• /
• 1997

This study was aimed to decrease AOX(Adsorbed Organic Halide Compounds) by applying bleaching methods of A(HNO$_3$ ＋ NaNO$_2$) and $D^{(H/L)}$(dual pH chlorine dioxide bleaching) to conventional OCEDED bleaching stages. And so we investigate the effects of NSA treatment and the influence of production rate of ion species in chlorine dioxide and pulp mixtures according to various pH as well as dual pH on pulp bleaching. Finally the effects of AOC_DED^{(H/L)}ED^{(H/L)}$ bleaching stage were investigated by measuring AOX, brightness, kappa number and viscosity of pulps. A stage was treated by using 4% $HNO_3$ and 0.05~2.0% $NaNO_2$ on pulp and $D^{(H/L)}$ stage was like that pulp mixed with chlorine dioxide solution was adjusted at pH 7.0 and reacted in pulp cosistency 3%, S~20min, $70^{\circ}C$, and then successively for 160~175min at pH 4.0. It was found that suitable $NaNO_2$ addition rate was at 0.6% where the brigtness of pulp was most higher and pulp viscosity was not decreased much. Chlorate ($CIO_3$) was decreased according to pH increase but chlorite($CIO_2$) was highly decreased according to pH increase. And chloride was slightly increased with pH increase. The applying of A and D^{(H/L)}$ bleaching stages to some various multiple bleaching stages ($AOC_DED^{(H/L)}/EopD^{(H/L)} etc.$) had good results that brightness was increased more 2~3% ISO than conventional method(OCEDEopD), but viscosity was dropped by only 1~2cps.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11a
• /
• pp.180-186
• /
• 1999

Alkaline peroxide bleaching of (chemi) mechanical pulp is a very complicated system where various process factors affect the bleaching performance and pulp properties. Traditional on-factor-at a time method is ineffective and costly in finding the optimal bleaching conditions. In this study statistical experimental methods which include three steps. I. e. screening, response surface modeling and optimization, were used to find the conditions for maximal brightness development during one stage alkaline peroxide bleaching of TMP which had an initial brightness of 54.5% Elerpho. The TMP was pretreated with EDTA(0.5% on O. D. pulp. consistency, $30^{\circ}C$ for 60 minutes) and bleached in a 2L Mark V Quantum Reactor at 750rpm, 7.5% of bleaching consistency and with 0.05% magnesium sulfate addition. The ranges of other factors studied were 1~5% hydrogen peroxide on O. D plup, 1~4% sodium hydroxide on O. D pulp and 1~4% sodium silicate on O. D pulp, reaction temperature 50~$90^{\circ}C$ and reaction time 40~180minutes. A models with good predictability was established and the maximal brightness after one stage bleaching was found to be 70% Elerpho at $50^{\circ}C$, 50 minutes 5% hydrogen peroxide on O. D. pulp 3.2~3.4% sodium hydroxide on O. D. pulp 3.2~3.4% sodium hydroxide on O. D pulp and 4% silicate on O. D pulp. However further studies on other pulp properties such as strength and brightness stability shall be carried out in order to find out the optimal bleaching conditions.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.325-329
• /
• 2006

Nippon Paper Industries, Co., Ltd. declared conversion of all the bleaching process to ECF, and most of the production had converted by now. To reduce ECF bleaching cost, we found that depending on electricity supply condition of the mill, utilization of ozone bleaching could be very effective. In addition, hot acid treatment of unbleached pulp also seemed to be effective for hardwood. In this study, several conditions for each technology were examined with the pulps from our own mills to reduce bleaching cost and to keep fiber quality acceptable level. In hot acid treatment study, with mild conditions (temperature lower than $90^{\circ}C$), sufficient reduction in Kappa number and hexenuronic acids content of the pulp were observed, while pulp viscosity was maintained. Moreover, to maintain strength of bleached pulp that subjected both to ozone bleaching and hot acid treatment, recommended Kappa number after ozone bleaching was more than 3. Based on these findings, two of our mills had installed medium-consistency ozone bleaching facilities and three mills installed hot acid treatment. Especially in Yatsushiro mill, both were installed in one bleaching line (A-ZD-E/P-D sequence), and running successfully.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.13-22
• /
• 2006

The analogs of cyclic hydroxamic acids containing N-OH group have been proposed to play effective laccase-mediators in kraft pulp bleaching with laccase/mediator system. The existing mediators (NHA, 1-HBT, VA), the best laccase-mediators reported so far, and selected several analogs of cyclic hydroxamic acids were evaluated as a laccase-mediator for kraft pulp bleaching. It was found that NHA was the most effective mediator for the Trychophyton sp. LKY-7 laccase (TrL) in kraft pulp bleaching with TrL/mediator system, increasing about 10% ISO of brightness and decreasing about 2.8 of kappa number after alkaline-peroxide bleaching. Of the cyclic hydroxamic acidstested, the NHP.1(N-hydroxypyridone analog) was shown to enable TrL to effectively degrade lignin in kraft pulp bleaching, demonstrating approximately similar effect with that of NHA. However, the effect of substituent patterns of cyclic hydroxamic acid analogs in kraft pulp bleaching was not observed. The inhibitions of NHA and NHP.1 on TrL were not exhibited in TrL/mediator system. As a new mediator for TrL, NHP.1 was considered to be able to use in kraft pulp bleaching with TrL/mediator system.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.381-386
• /
• 2006

Many different types of bleaching chemicals and processes have been globally used for deinked pulp. Besides chlorine-free bleaching chemicals, hydrogen peroxide, and sodium dithionite that could be used without restriction for almost all types of fibers, chlorine-containing chemicals such as chlorine dioxide and sodium hypochlorite have also used throughout the world. Even though hydrogen peroxide is commonly used in newsprint, it could not effectively increase brightness. Experimental evaluation on the possibility of using formamidine sulfinic acid (FAS), a reducing agent, for bleaching a wood-containing deinked pulp has been carried out in this study. The effect of bleaching efficiency for FAS on operational conditions and chemical concentrations compaired to hydrogen peroxide in one and two stages was studied. FAS bleaching showed higher brightness at high temperature and low consistency, and vice versa for peroxide one. Bleaching with sodium silicate and DTPA in FAS and peroxide stage showed better results than cases without them. Sodium silicate and chelant seemed minimize the influence of transition metal ions, including manganese and iron ions, which induce both bleaching agents to decompose. As a result, FAS as a reducing agent seems more effective than hydrogen peroxide for increasing brightness and reducing yellowness. FAS and FAS sequence seemed more efficient than the other two stages of bleaching sequences with regard to the best brightness level obtained. When bleaching was conducted with FAS, COD load was just about one-third compared to peroxide, and brightness stability of the bleached pulp appeared better than peroxide after UV light irradiation.