• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.564-568
• /
• 2007

Gas hydrate has been attractive topic for two dedicates because it may cause the global warming, ocean hazards associated with the instability of marine slope due to the gas hydrate release as well as high potential of future energy resources. The study on gas hydrate in Ulleung basin has been performed since 1999 to explore the potential and distribution of gas hydrate offshore Korea. The numerous multi channel seismic data have been acquired and processed by Korea Institute of Geosciences and Mineral Resources (KIGAM). The results showed clearly the gas hydrate indicators such as pull up structure, bottom simulating reflector (BSR), seismic blanking zone. The prestack depth migration has been considered as fast and accurate technique to image the subsurface. In this paper, we will present both the conventional seismic data processing and apply Kirchhoff prestack depth migration for gas hydrate data set. The results will be applied for core sample collections and for proposal more detail 2D with long offset or 3D seismic exploration.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.20-23
• /
• 1998

An improved current-fed push-pull PWM converter with integrated magnetics is presented. With this improved topology, the design of magnetic elements such as an inductor and a transformer becomes easier than that using the conventional topology, especially when the converter is suffered from an extremely high input current. Since this gives twice the voltage conversion ratio compared to the conventional one, it is also suited for the high voltage step-up power conversion process. The operation of the proposed converter is thoroughly analyzed. Also, the theoretical analysis and experimental results are taken from the laboratory level prototype.

• Journal of Welding and Joining
• /
• 제14권4호
• /
• pp.79-88
• /
• 1996

For improvement in productivity and weld quality, weld seam tracking and welding parameter control are very essential in the welding of a structure which can not be cxactly fit-up due to mismatch, discontinous gap, deflection, etc.. In this study, an automatic weld seam tracking system is developed for I-butt joint structure, and the system consists of XYZ working table, vision sensor and user interface program. In the developed vision sensor system, an image projection algorithm for weld-line detection and an adaptive current control algorithm for gap variation were implemented. The user interface program developed in this study by basing on the objct oriented concept could provide very convenient way to utilize the tracking system with the pull-down menu driven structure. The developed system showed a good seam tracking and weld quality control capability corresponding to deflected weld lines and gap variations.

• 한국전자파학회논문지
• /
• 제16권12호
• /
• pp.1186-1193
• /
• 2005

본 논문은 비대칭 나선 구조의 결함 접지 구조(Defected Ground Structure: DGS)를 이용한 새로운 3 dB 브랜치 라인 하이브리드를 제안하였다. 본 논문에 제시된 3 dB 브랜치 라인 하이브리드는 2차와 3차 고조파 성분을 효과적으로 차단할 수 있는 특성을 갖는다. 또한 고조파 성분뿐만 아니라 저주파 혼변조 성분을 효과적으로 제거할 수 있는 DGS $\lambda$/4 바이어스 라인을 제안하였다. 고조파 차단 특성을 가지는 브랜치 라인 하이브리드 튜너와 바이어스 라인을 이용하여 IMT-2000 기지국 송신 대역에서 동작하는 증폭기의 2차, 3차 고조파 성분을 각각 25 dB과 27 dB 감쇄하였다. 본 논문에서 제시한 회로를 이용하면 기존 방법보다 훨씬 용이한 증폭기의 고조파로드-풀 회로를 쉽게 구현할 수 있다.

• 한국농공학회논문집
• /
• 제53권1호
• /
• pp.1-7
• /
• 2011

The nature of a network implies movement among vertices, and can be regarded as flows. Based on the flow concept which network follows the hydraulic fluid principle, we develop a spatial network model using Bernoulli equation. Then we explore the organization of spatial network and growth by the velocity of network flows. Results show that flow velocity determines network connections or influence of a vertex up to a point, and that the overall network structure is the result of pull force (pressure) and flow velocity. We demonstrate how one vertex can monopolize connections within a network.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1484-1494
• /
• 2017

We present a two-stage inverter with high step-up conversion ratio engaging modified finite-set Model Predictive Control (MPC) for utility-integrated photovoltaic (PV) applications. The anticipated arrangement is fit for low power PV uses, the calculated efficiency at 150 W input power and 19 times boosting ratio was around 94%. The suggested high-gain dc-dc converter based on Cockcroft-Walton multiplier constitutes the first-stage of the offered structure, due to its high step-up ability. It can boost the input voltage up to 20 times. The 3S current-source inverter constitutes the second-stage. The 3S current-source inverter hires three semiconductor switches, in which one is functioning at high-frequency and the others are operating at fundamental-frequency. The high-switching pulses are varied in the procedure of unidirectional sine-wave to engender a current coordinated with the utility-voltage. The unidirectional current is shaped into alternating current by the synchronized push-pull configuration. The MPC process are intended to control the scheme and achieve the subsequent tasks, take out the Maximum Power (MP) from the PV, step-up the PV voltage, and introduces low current with low Total Harmonic Distortion (THD) and with unity power factor with the grid voltage.

• 한국농촌건축학회논문집
• /
• 제16권1호
• /
• pp.111-117
• /
• 2014

The aim of this study is to find out the pattern of Ger form, inner spatial composition of Mongolian Ger house, and to take a dig at the structural or symbolic elements of nomadic architecture of Ger. To the point of view of corresponding to living and space of housing, remarkable characteristics of Ger Architecture is able to pull down and recombine the structures of nomadic house. Even though urbanization of Mongolia has spreading rapidly in a whole nation, most of people preserves traditional housing pattern within Ger. The ways of survey are to study of traditional home of Mongolia, and then field work at residence or mountain area in Ulan Bator and Gorkhi Terelj National Park area. This survey contains the form, size, structure, spatial composition of living space, structure, and materials. There are three results as follows: First, the form of Ger house is like a pyramidal or crown roof style to approximate to the round shape of it. Usually they had lived in nomadic way of life, so the Ger had a movable and flexible structure. Second, the Ger is easy to build up and deconstruct to move or find a new pasture. Third, the Mongolian Ger structure is composed by mainly five elements that are Khana, Khaalga, Toono, Bagana, and Uni. It has a hierarchy of internal spaces which are classified to gender, orientation, and property.

• 전산구조공학
• /
• 제9권3호
• /
• pp.157-167
• /
• 1996

본 연구에서는 Boland C언어를 사용하여 최적설계 수행에 필요한 작업을 쉽게 수행할 수 있는 전처리기와 후처리기를 개발하였다. 전처리기는 선택된 최적설계 알고리즘에 필요한 입력 데이터나 서브루틴 작성을 도와준다. 후처리기에서는 반복 계산중에 생성된 수치값을 그래프로 도시해 줌으로써 문제에 대한 전반적인 파악이 가능하도록 하였다. 수치예제는 선형문제와 삼부재 구조물에 대해서 제시하였다.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.661-667
• /
• 2016

연약지반에 적용 가능한 앵커의 기술로 개발계획인 헬릭스 형태의 소형 앵커는 기존 앵커보다는 시공 단계가 단순하고 그라우트가 양생될 때까지 기다릴 필요가 없으므로 공기단축 및 연장 롯드 반복사용이 가능하며 비용 절감효과가 있다. 또한 배토가 없으며, 회전식으로 헬리컬 앵커를 삽입하기 때문에 시공성이 좋으며, 앵커의 제거도 설치만큼 쉬우므로 가시설의 제거용 앵커로도 활용 가능하며, 헬리컬 앵커 날개 수에 따라 인발저항이 달라, 효율적인 헬리컬 앵커 설계가 가능할 것으로 판단된다. 연약지반에 헬릭스 앵커를 시험시공하기 위하여 헬리컬 앵커와 토크드라이버를 제작하였으며 헬리컬 앵커를 삽입/인발하여 지지력을 산정하는 연구를 진행하였고 관입토크와 앵커의 인발력의 상관관계를 도출하였다. 대형토조를 활용하여 모형시험을 수행한 결과 지반이 단단할수록 회전관입 토크가 크게 측정되었으며 이에 따른 인발저항도 크게 나왔다. 이 연구에서 수행한 실험범위 내에서는 인발저항과 관입토크는 서로 비례관계에 있음을 알 수 있었다.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.171-178
• /
• 2008

This paper is concerned with the development of a measurement system using field measuring device which will give the membrane stress of the membrane structures. Up to this point, several techniques on measurement of membrane stresses has been proposed and some have been used in the fields, but accuracy of the measured stresses to be far from reliable one. Such situation has not been changed until recent days, we do not have the measurement device on which we can depend. On top of that, due to the different properties in cross directions for material of the membrane, the stress in the warp direction is different from that in the fill one. A new method is proposed to measured membrane stresses in two different direction separately, where instead of membrane stresses directly, an external force perpendicular to the membrane to be applied. A portable device can measure the applied force and the displacement. A special testing bed to be fabricated to accommodate $50cm{\times}50$ manbrane specimen which can apply 5 ton load in two orthogonal direction. A special device using push-pull gage was developed. To measure the membrane stresses in warp and fill direction separately, a different length of the tips are used. The measuring device which can called tension meter, can be calibrated on the testing bed, and optimized the length and shape of tip.