• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.977-983
• /
• 2016

This paper proposes a novel code-tracking scheme to track the fine code synchronization for BOC (pn,n)-modulated global navigation satellite system signals in a repeat-back jamming environment. The correlation function of BOC (pn,n)-modulated signals has several peaks. The correlation function in the advanced offset region remains almost unchanged due to the repeat-back signals being received later than a line-of-sight signal in the same multipath signal receiving case. Additionally, the combined pseudo-random noise signal can be treated as repeat-back jamming signals, like multipath signals. In this paper, we propose a novel code-tracking scheme utilizing the advantages of using a combined pseudo-random noise signal in the advanced offset region and verify its performance through simulation.

• 전자공학회논문지 IE
• /
• v.44 no.3
• /
• pp.23-34
• /
• 2007

For an effective phase multiplexing in a volume holographic system, four types of phase code, pseudo random code(PSC), Hadamard matrix(HAM), pure random code(PRC), equivalent random code(ERC), used as reference beams are generated. In case of $32{\times}32$ address beam, a phase error with 0%, 5%, 10%, 15%, 20%, and 25% error rate, is purposely added to the real phase values in order to consider the practical SLM's nonlinear characteristics of phase modulation in computer simulation. Crosstalks and SNRs(signal-to-ratio) are comparatively analyzed for these phase codes by the auto-correlation and cross-correlation. PSC has the lowest cross-correlation mean value of 0.067 among four types of phase code, which means the SNR of the pseudo random phase code is higher than other phase codes. Also, the standard deviation of the pseudo random phase code indicating the degree of recalled data degradation is the lowest value of 0.0113. In order to analyze the affect by variation of pixel size, simulation is carried out by same method for the case of $32{\times}32$, $64{\times}64$, $128{\times}128$, $256{\times}256$ address beams.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.10
• /
• pp.869-875
• /
• 2016

In this paper, a novel scheme with which to mitigate a repeat-back jamming effect is proposed for the GPS L1 coarse/acquisition signal. The proposed scheme estimates the code tracking bias caused by repeat-back jamming signals using a Combined Pseudo-random noise signal. It then mitigates the repeat-back jamming effect by subtracting the estimated code timing on a normal correlation channel from the estimated value. Through a Monte-Carlo simulation, the proposed scheme can diminish the running average of code tracking bias to less than 10% of the bias using the conventional scheme.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.4
• /
• pp.20-27
• /
• 2010

This paper proposes a saturation compensating method by embedding pseudo-random code information in wavelet packet based colorization algorithm. In the color-to-gray process, an input RGB image is converted into YCbCr images, and a 2-level wavelet packet transform is applied to the Y image. And then, color components of CbCr are embedded into two sub-bands including minimum amount of energy on the Y image. At this time, in order to compensate the color saturations of the recovered color image during the printing and scanning process, the maximum and minimum values of CbCr components of an original image are also embedded into the diagonal-diagonal sub-band by a form of pseudo-random code. This pseudo-random code has the maximum and minimum values of an original CbCr components, and is expressed by the number of white pixels. In the gray-to-color process, saturations of the recovered color image are compensated using the ratio of the original CbCr values to the extracted CbCr values. Through the experiments, we can confirm that the proposed method improves color saturations in the recovered color images by the comparison of color difference and PSNR values.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.59-64
• /
• 2024

The small tracking radar randomly changes the transmission period to avoid deceptive signals such as RGPO (Range Gaet Pull Off) operated on the target. Since the code repeats after a specific section, it becomes difficult to avoid a deceptive signal when the repetition is exposed. In this paper, a more realistic transmission pulse code is generated by adding random code generation through FPGA and system white noise. We present the research results of code generation that generates PRF that can avoid repetition while using pseudo-random code in EPROM using FPGA. Also, the result of designing random PRF pulse was confirmed by applying it to tracking radar.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.3
• /
• pp.107-114
• /
• 2015

Binary Offset Carrier (BOC) signal planned for future Global Navigation Satellite System (GNSS) provided better positioning accuracy and smaller multipath error than GPS C/A signal. However, due to the multiple side peaks in the auto-correlation function (ACF) of the BOC modulated signals, a receiver may false lock onto one of the side peaks in the tracking mode. This false lock would then result in a fatal tracking error. In this paper, we propose an unambiguous tracking method for composite BOC (CBOC) signals to mitigate this problem. It aims to reduce the side peaks of the ACF of CBOC modulated signals. It is based on the combination of traditional CBOC correlation function (CF) and reference CF of unmodulated pseudo- random noise code (PRN code). First, we present that cross-correlation function (CCF) with unmodulated PRN code is close to the secondary peaks of the traditional CBOC. Then, we obtain an unambiguous correlation function by subtracting traditional CBOC ACF from these CFs. Finally, the tracking performance for the CBOC signals is examined, and it is shown that the proposed method has better performance than the traditional unambiguous tracking method in additive white Gaussian noise (AWGN) channel.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.277-280
• /
• 2000

In this paper, we designed a turbo decoder using VHDL. To maximize effective free distance of the turbo code, we implemented pseudo random interleaver. A MAP(Maximum a posteriori) decoder is used as a primimary decoder. We avoided multiplication by using lookup tables(ROM). We expect that this small-sized turbo decoder is suitable for mobile communication. We simulated turbo decoder with Altera MAX+PLUS II.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.241-247
• /
• 2022

Ad hoc network is self-organized network powered by battery. The reliability of virtual user identification and channel security are reduced when SNR is low due to limited user energy. In order to solve this problem, a joint virtual user identification and channel security en/decoding method is proposed in this paper. Transmitter-receiver-based virtual user identification code is generated by executing XOR operation between orthogonal address code of transmitter and pseudo random address code of receiver and encrypted by channel security code to acquire orthogonal random security sequence so as to improve channel security. In order to spread spectrum as well as improve transmission efficiency, data packet is divided into 6-bit symbols, each symbol is mapped with an orthogonal random security sequence. Subspace-based method is adopted by receiver to process received signal firstly, and then a judgment model is established to identify virtual users according to the previous processing results. Simulation results indicate that the proposed method obtains 1.6dB E_b/N₀ gains compared with reference methods when miss alarm rate reaches 10^-3.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.10
• /
• pp.1073-1078
• /
• 2014

In this paper, an effective repeat-back jamming (RBJ) mitigation scheme known assuccessive repeat-back jamming cancellation (SRC) is proposed for the utilization of the successive interference cancellation (SIC) algorithm which is used to mitigate the near-far effect and the multiple-access interference for code division multiple-access communication systems. The proposed scheme uses a combined pseudo-random noise (C-PRN) signal from the estimated major parameters of RBJ signals. To evaluate the performance of the proposed scheme, the root mean squared (RMS) code tracking errors are shown according to the standard deviation of the parameter estimation errors of an RBJ signal, and using the well-known major parameters estimation schemes with a C-PRN signal through Monte-Carlo simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.164-169
• /
• 2009

This paper presents a fast and accurate ranging algorithm for the WiBro system. The proposed algorithm detects a received ranging code and estimates its propagation delay using the correlation characteristics of the PRBS (Pseudo Random Binary Sequence) and the circular shift property of the discrete Fourier transform operator. The proposed ranging algorithm was applied to array antenna systems to show how it could improve the ranging performance of an array antenna system compared to a conventional base station system, which uses only a single antenna.