• Journal of KIISE
• /
• v.42 no.12
• /
• pp.1467-1473
• /
• 2015

In this paper, we implemented a parallel random number generation program on GPU's, which are known for high performance computing, using LCG (Linear Congruential Generator). Random numbers are important in all fields requiring the use of randomness, and LCG is one of the most widely used methods for the generation of pseudo-random numbers. We explained the parallel program using the NVIDIA CUDA model and MPI(Message Passing Interface) and showed uniform distribution and performance results. We also used a Monte Carlo algorithm to calculate pi(${\pi}$) comparing the parallel random number generator with cuRAND, which is a CUDA library function, and showed that our program is much more efficient. Finally we compared performance results using multi-GPU's with those of ideal speedups.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.458-466
• /
• 2005

Full-scale utilizations of batch separation process often require knowledge about thermodynamics and correlation techniques of physical properties of complex mixture consisting of a great number of many unknown components. Various empirical correlations have been proposed to predict the physical properties mostly about the pseudocomponent of petroleum. In this study, one parameter correlations are developed for the calculations of the critical physical properties and ideal heat capacity of the pseudo-component of coal tar fractions. Developed model can provide a tool for the design and operations for the batch distillation of coal tar mixture.

• Structural Engineering and Mechanics
• /
• v.74 no.1
• /
• pp.19-32
• /
• 2020

Metallic energy-dissipation dampers are widely used in structures. They are comprised of an added damping and stiffness (ADAS) device with many parallel, diamond-shaped hole plates, the neck width of which is an important parameter. However, no studies have analyzed the neck width's influence on the ADAS device's performance. This study aims to better understand that influence by conducting a pseudo-static test on ADAS, with three different neck widths, and performing finite element analysis (FEA) models. Based on the FEA results and mechanical theory, a design neck width range was proposed. The results showed that when the neck width was within the specified range, the diamond-shaped hole plate achieved an ideal yield state with minimal stress concentration, where the ADAS had an optimal energy dissipation performance and the brittle shear fracture on the neck was avoided. The theoretical values of the ADAS yield loads were in good agreement with the test values. While the theoretical value of the elastic stiffness was lower than the test value, the discrepancy could be reduced with the proposed modified coefficient.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1350-1353
• /
• 2002

A new form of spread spectrum technique called the ultra wideband impulse radio (UWB-IR) system has drawn much attention for future high speed wireless communication services. In this paper, a new type of time hopping sequences constructed from multiple distinct m-sequences of the same order, is proposed for multiple access in the UWB-IR systems. Simulation results reveal that the proposed time hopping sequences achieve comparable or even better bit error rate performance than the ideal random sequences, and can be effectively applied in various multiple access situations.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.141-144
• /
• 2007

Polypyrrole(PPy) was composite with MWNT to attain cycle stable by chemical method. We have been considered PPy is the ideal material for high energy density electrochemical capacitor due to pseudo capacitor reaction. In this study we found that increase in cycle life due to composite MWNT. Also PPy/MWNT composite material have resulted larger capacitance and exhibits better electrochemical behavior. The structural feature was investigated by using SEM and TEM. The PPy/CNT composite is not only a promising ultracapacitor material for energy storages but also has a good possibility because of its great capacitive properties, simple preparation and low cost.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1365-1366
• /
• 2007

Cobalt oxide was composite with MWNT to attain cycle stable by chemical method. We have been considered CoOx is the ideal material for high energy density electrochemical capacitor due to pseudo capacitor reaction. In this study we found that decrease in resistance due to composite MWNT. Also CoOx/MWNT composite material have resulted larger capacitance and exhibits better electrochemical behavior. The structural feature was investigated by using SEM. The CoOx/MWNT composite is not only a promising ultracapacitor material for energy storages but also has a good possibility because of its great capacitive properties, simple preparation and low cost.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.1
• /
• pp.21-32
• /
• 2002

In this paper, for any prime q, new cyclic difference sets with Singer parameter equation omitted are constructed by using the q-ary sequences (d-homogeneous functions) of period $q_n$-1. When q is a power of 3, new cyclic difference sets with Singer parameter equation omitted are constructed from the ternary sequences of period $q_n$-1 with ideal autocorrealtion found by Helleseth, Kumar and Martinsen.

• Journal of the Korean Chemical Society
• /
• v.41 no.6
• /
• pp.284-291
• /
• 1997

The critical micelle concentrations($CMC^*$) of a cationic surfactant cetylpyridinium chloride (CPC) and a nonionic surfactant triton X-100(TX-100) in aqueous solutions of n-alcohols(methanol, ethanol, 1-propanol, 1-butanol and 1-pentanol) were determined by UV spectroscopic method at 25$^{\circ}C$. The various thermodynamic values in 0.1 M n-alcohols were calculated by means of the equation derived from the pseudo-phase separation model and compared with the values in the absence of n-alcohols. The results were a good agreement with the nonideal mixed micelle model, and they showed negative deviation from the ideal behavior.

• Journal of the Korean Chemical Society
• /
• v.56 no.6
• /
• pp.720-724
• /
• 2012

Under pseudo-first order conditions, the monomeric species of Cr(VI) was found to be kinetically active in the absence of phenanthroline (phen) whereas in the phen-promoted path, the Cr(VI)-phen complex undergoes a nucleophilic attack by etane-1,2-diol to form a ternary complex which subsequently experience a redox decomposition leading to hydroxy ethanal and Cr(III)-phen complex. The effect of the cationic surfactant (CPC), anionic surfactant (SDS) and neutral surfactant (TX-100) on the unpromoted and phen-promoted path have been studied. Micellar effects have been explained by considering the preferential partitioning of reactants between the micellar and aqueous phase. Combination of TX-100 and phenanthroline will be the ideal for chromic acid oxidation of ethane-1,2-diol in aqueous media.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.2
• /
• pp.121-134
• /
• 2004

This article describes a clinical protocol for the conventional rehabilitation of patient diagnosed with partial anodontia. A combined dental therapy approach was used and included endodontic therapy and root capping on the maxillary central incisors, fabrication of a maxillary overdenture, and fabrication of mandibular konus overdenture supported by 3 konus abutments. Within this protocol, tooth-supported overdenture prostheses are used for 2 purposes: first, to obtain the most rigid retention and function at an established maxillary-mandibular relationship; and second, to continuously maintain function and esthetic appearance applying immediate dentures after teeth extraction. The idea behind this protocol and its associated clinical procedures is presented along with a discussion compared with implant therapy. In the case introduced, and after 7 years of observation, the therapy can be seen as a success. We increased the occlusal vertical height in this case, but it would be more appropriate to see this as recovering the occlusal vertical height that was lost. The process of increasing the occlusal vertical height, that is restoration of the face, modification of the extrinsic occlusion of the incisors, and retraction of the mandible is very difficult and important. Ultimately, class III malocclusion is fixed, adequate occlusal vertical height is gained, and the retracted posterior anodontial portion is restored by prosthodontic dentures based on the rigid support theory. The result of the therapy done on the later-achieved malocclusion with partial anodontia on the posterior portion must consider the following in order to maintain the safety of the esthetics of the tooth and face for a period of time: 1) occlusal restoration with an ideal occlusal vertical height, 2) allowance of the final occlusion induced by the functional relationship of the upper and lower jaw, 3)final occlusion functionally induced by the lip competence limit.