• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.5
• /
• pp.792-799
• /
• 2017

The real time unmanned monitoring system of an equipment's internal parts and condition requires the monitoring device to be able to stop at a set location on the rail. However, due to the slip between the driving surface and the roller, an error occurs between the actual position and the command position. In this paper, a method to compensate the position error due to the roller slip is proposed. A proximity sensor located at both ends of the rail detects the starting point and the maximum position pulse, linearly compensating the error between the angular position of the motor and the mechanically fixed starting and maximum position pulse of the rail in forward and reverse direction. Moreover, unlike the existing servo position controller, the motor adopts the position detection method of Hall sensor in BLDC (Brushless DC) and applies an algorithm for low-speed driving so that a stable position control is possible. The proposed rail guided unmanned monitoring system with driving slip compensator was tested to verify the effectiveness.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.83-83
• /
• 2000

Recently, Vision system has being used all around industry. Sensor systems are used for Mark Reader, for example, optical scanning is proximity sensor system, have many disadvantages, such as, lacking user interface and difficulty to store original specimens. In contrast with this, Vision systems for Mark Reader has many advantages, including function conversion to achieve other work, high accuracy, high speed, etc. In this thesis, we have researched the development of Mark Reader by using a Vision system. The processing course of this s)'stem is consist to Image Pre-Processing such as noise reduction, edge detection, threshold processing. And then, we have carried out camera calibration to calibrate images which are acquired from camera. After searching for reference point within scanning area(60pixe1${\times}$30pixe1), we have calculated points crossing by using line equations. And then, we decide to each ROI(region of interest) which are expressed by four points. Next we have converted absolute coordinate into relative coordinate for analysis a translation component. Finally we carry out Mark Reading with images classified by six patterns. As a result of experiment which follows the algorithm has proposed, we have get error within 0.5% from total image.

• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.211-216
• /
• 2012

Fires are the most common disaster and early fire detection is of great importance to minimize the consequent damage. Simple sensors including smoke detectors are widely used for the purpose but they are able to sense fires only at close proximity. Recently, due to the rapid advances of relevant technologies, vision-based fire sensing has attracted growing attention. In this paper, a novel visual sensing technique to automatically detect fire is presented. The proposed technique consists of multiple steps of image processing: pixel-level, block-level, and frame level. At the first step, fire flame pixel candidates are selected based on their color values in YIQ space from the image of a camera which is installed as a vision sensor at a fire scene. At the second step, the dynamic parts of flames are extracted by comparing two consecutive images. These parts are then represented in regularly divided image blocks to reduce pixel-level detection error and simplify following processing. Finally, the temporal change of the detected blocks is analyzed to confirm the spread of fire. The proposed technique was tested using real fire images and it worked quite reliably.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.3
• /
• pp.186-191
• /
• 2015

Hand gesture is the most common tool used to interact with and control various electronic devices. In this paper, we propose a novel hand gesture recognition method using fuzzy logic based classification with a new type of sensor array. In some cases, feature patterns of hand gesture signals cannot be uniquely distinguished and recognized when people perform the same gesture in different ways. Moreover, differences in the hand shape and skeletal articulation of the arm influence to the process. Manifold features were extracted, and efficient features, which make gestures distinguishable, were selected. However, there exist similar feature patterns across different hand gestures, and fuzzy logic is applied to classify them. Fuzzy rules are defined based on the many feature patterns of the input signal. An adaptive neural fuzzy inference system was used to generate fuzzy rules automatically for classifying hand gestures using low number of feature patterns as input. In addition, emotion expression was conducted after the hand gesture recognition for resultant human-robot interaction. Our proposed method was tested with many hand gesture datasets and validated with different evaluation metrics. Experimental results show that our method detects more hand gestures as compared to the other existing methods with robust hand gesture recognition and corresponding emotion expressions, in real time.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.55-63
• /
• 2019

Proximity sensors and rearview cameras for automobile safety are common, but many accidents are still occurring. Using the All Around View and object recognition algorithm to show the front, back, left, right and bottom of the vehicle, the sensor detects the presence of a living body when the vehicle starts or parks, and displays the outside of the vehicle on the screen. In addition, the object recognition algorithm is used to visualize the object by expressing the position of the object. In this way, we propose a strong safety system that can prevent human accidents caused by the vehicle by sensing, screen, and expression.

• 한국환경농학회:학술대회논문집
• /
• 2009.07a
• /
• pp.187-199
• /
• 2009

We present real.time, rapid detection of Mycoplasma pneumonia in phosphate buffered saline (PBS) inside a Y.channel polydimethylsiloxane (PDMS) microfluidic device by means of optical fiber monitoring of latex immunoagglutination. The latex immunoagglutination assay was performed with serially diluted Mycoplasma pneumonia solutions using highly carboxylated polystyrene particles of 390nm and 500nm diameter conjugated with monoclonal anti. Mycoplasma pneumonia . Proximity optical fibers were located around the viewing cell of the device, which were used to measure the increase in 45${\b{o}}$ forward light scattering of the immunoagglutinated particles. The detection limit was less than 50 $pgml^{-1}$ both for 390nm and 500nm microspheres with the detection time less than 90 seconds.

• 전기의세계
• /
• v.43 no.5
• /
• pp.44-47
• /
• 1994

자기부상열차의 효율적인 추력제어 및 안전성 높은 운행을 위해서 고성능의 속도/위치 검출 시스템이 중요한 역할을 한다. 일반열차는 바퀴가 선로에 접촉하여 주행하므로 차축의 회전속도를 측정해서 열차의 선로위를 일정한 간격을 두고 부상하여 주행하므로 비접촉식 측정방법을 사용해야만 한다[1-5]. 특히, 고속으로 주행하는 자기부상열차의 속도를 측정하기 위해서는 응답속도가 빠른 센서시스템을 개발하며, 또한 열차주행에 수반되는 자기장의 영향을 극소화하도록 센서시스템을 설계해야만 한다. 본고에서는 전형적인 자기부상열차인 일본의 HSST 시스템(주행속도 100km/h)과 독일의 Transrapid 시스템(주행속도: 400km/h)에 적용되고 있는 속도/위치 검출 시스템의 작동원리를 상세히 설명한다. HSST 시스템은 유도무선(inductive radio system) 방법을 이용하고 Transrapid 시스템은 와전류근접센서(eddy-current proximity sensor)를 이용한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.209-219
• /
• 1999

이상적인 초음파 물체 감지 센서는 감지거리가 길고, 고해상도와 작은 크기이어야 한다. 그러나 현재 공기 중에 사용되고 있는 선형 초음파센서로는 공기의 높은 음흡수 때문에 이 세 가지 조건을 동시에 만족하기는 어렵다. 본 논문은 서로 다른 주파수성분의 두 음파의 비선형 상호작용으로 생성되는 두 주파수 차이에 상당하는 주파수의 음파를 이용한 물체감지 비선형적 초음파 감지센서에 관한 연구이다. 링-디스크 두 요소로 구성된 비선형적 초음파센서에 의해 형성되는 음장을 예측할 수 있는 컴퓨터 프로그램을 개발하였으며, 이 프로그램을 이용하여 비선형적 초음파센서의 최적 형태와 주파수를 결정하고, 선형 초음파센서와 세 조건 측면에서 비교 검토하였다. 비교 결과 비선형적 초음파센서가 해상도측면에서 유리하고, 75 dB이하의 초음파 소음환경에서 사용할 때 감지거리면에서 유리하다.

• Journal of Biosystems Engineering
• /
• v.19 no.2
• /
• pp.99-111
• /
• 1994

Automatic control system using microcomputer that have been studied in greenhouse, however, it was very difficult operation with success due to handicap for a various conditions and cultivated plants. This study was performed in order to develop of the basic program and hardware system for automatic control in greenhouse, such as automatic supplying of water, liquefied fertilizer solution and chemical solution. The results were summarized as follows. 1. The program for soil moisture control used by the switch type tensiometer was well operated. 2. The proximity switch was applied as well to water level control but it was very expensive, so low-priced sensor has to be developed. 3. The water meter was not excellent for mixing control of liquefied fertilizer, chemical and water, so water meter for only agricalture has to be developed. 4. Interface system for this study was suited to the developed controller. 5. Automatic control system to supply for water, liquefied fertilizer and chemical solution that was well operated as a fundamental study for product of controller.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.865-867
• /
• 2016

본 논문에서는 섬유근접센서를 이용하여 측정한 맥박을 평가하기 위해 Biopac MP150에서 획득한 Electrocardiography(ECG)와의 관계를 보았다. 섬유근접센서는 요골동맥에서의 맥박을 측정하기 위해 $5{\times}5$ 크기로 설계하였고, 전처리 과정과 필터링을 거쳐 획득한 데이터 값은 ECG 데이터와 Peak Point의 개수를 비교하여 올바른 맥박이 측정되었는지를 판단하였다. 그 결과 섬유근접센서와 MP150에서 측정한 두 데이터의 Peak Point가 모두 동일한 결과를 보였다.