• Radiation Oncology Journal
• /
• v.32 no.2
• /
• pp.63-69
• /
• 2014

Purpose: To find the applicability of adjuvant radiotherapy for extrahepatic bile duct cancer (EBDC), we analyzed the pattern of failure and evaluate prognostic factors of locoregional failure after curative resection without adjuvant treatment. Materials and Methods: In 97 patients with resected EBDC, the location of tumor was classified as proximal (n = 26) and distal (n = 71), using the junction of the cystic duct and common hepatic duct as the dividing point. Locoregional failure sites were categorized as follows: the hepatoduodenal ligament and tumor bed, the celiac artery and superior mesenteric artery, and other sites. Results: The median follow-up time was 29 months for surviving patients. Three-year locoregional progression-free survival, progression-free survival, and overall survival rates were 50%, 42%, and 52%, respectively. Regarding initial failures, 79% and 81% were locoregional failures in proximal and distal EBDC patients, respectively. The most common site was the hepatoduodenal ligament and tumor bed. In the multivariate analysis, perineural invasion was associated with poor locoregional progression-free survival (p = 0.023) and progression-free survival (p = 0.012); and elevated postoperative CA19-9 (${\geq}37U/mL$) did with poor locoregional progression-free survival (p = 0.002), progression-free survival (p < 0.001) and overall survival (p < 0.001). Conclusion: Both proximal and distal EBDC showed remarkable proportion of locoregional failure. Perineural invasion and elevated postoperative CA19-9 were risk factors of locoregional failure. In these patients with high risk of locoregional failure, adjuvant radiotherapy could be considered to improve locoregional control.

• Annals of Clinical Neurophysiology
• /
• v.6 no.1
• /
• pp.20-25
• /
• 2004

Background and Objectives: The proximal and distal nerve segments are preferentially involved in acquired demyelinating polyneuropathies (ADP). This study was undertaken in order to assess the usefulness of motor evoked potential (MEP) and somatosensory evoked potential (SSEP) in the detection of the proximal nerve lesion in ADP. Methods: MEP, SSEP and conventional NCS were performed in 6 consecutive patients with ADP (3 AIDP, 3 CIDP). MEP was recorded from abductor pollicis brevis and abductor hallucis using magnetic stimulation of the cortex and the cervical/lumbar spinal roots. SSEP were elicited by stimulating the median and posterior tibial nerves. Latency from cortex and cervical/lumbar roots, central motor conduction time (CMCT), EN1-CN2 interpeak latency were measured for comparison. Results: MEP was recorded in 24 limbs (12 upper and 12 lower limbs) and SSEP in 24 limbs (12 median nerve, 12 posterior tibial nerve). F-wave latency was prolonged in 25 motor nerves (25/34, 73.5%). Prolonged CML and PML were found in 41.7% (10/24) and 45.8% (11/24), respectively. Interside difference (ISD) of CMCT was abnormally increased in the upper extremity, 66.7% (4/6 pairs) in case of CML-PML. EN1-CN2 interpeak latency was abnormally prolonged in one median nerve (1/10) and LN1-P1 interpeak latency was normal in all posterior tibial nerves. Conclusions: MEP and SSEP may provide useful information for the proximal nerve and root lesion in ADP. MEP and SSEP is supplemental examination as well as complementary to conventional NCS.

• Journal of Korean Foot and Ankle Society
• /
• v.13 no.2
• /
• pp.129-132
• /
• 2009

Purpose: We evaluated the result of operative treatment of the hallux valgus in male patients. Materails and Methods: Total 11 cases (10 patients) of the hallux valgus deformity that treated with operation were evaluated. Following Mann's radiological classification system, there was 1 cases of mild, 8 cases of moderate, and 2 cases of severe. Preoperative, postoperative, postoperative 3 months and postoperative 6 months follow up standing radiographs were used as radiologic evaluation. And we evaluated radiological outcomes by hallux valgus angle (HVA), first-second intermetatarsal angle (IMA), distal metatarsal articular angle (DMAA), proximal phalangeal articular angle (PPAA) and clinical outcomes by hallux-metatarsophalangeal scale of American Orthopaedic Foot and Ankle Society (AOFAS) score. Result: Radiologically, the mean preoperative HVA $37^{\circ}$ and IMA $13.7^{\circ}$ were improved postoperatively as HVA $11.9^{\circ}$ and IMA $4.7^{\circ}$, and the mean preoperative DMMA $29.4^{\circ}$ and PPAA $8.6$ were improved postoperatively DMMA $13.9^{\circ}$ and PPAA $7^{\circ}$. But, postoperative 6 months follow up HVA, IMA, DMMA and PPAA was increased at $14.2^{\circ}$, $6.3^{\circ}$, $16.1^{\circ}$ and $8.3^{\circ}$. Average AOFAS score were improved from 61.2 points to 75.2 points. Conclusion: In our study, operative treatment of hallux valgus in male patients with proximal metatarsal osteotomy and distal soft tissue procedure showed good results but it was necessary to pay attention to increase aspect of follow up radiologic measurements.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.6
• /
• pp.463-468
• /
• 2014

Objective : Unexpected Solitaire stent detachment can occur during mechanical Solitaire thrombectomy. The purpose of this study was to retrospectively evaluate the influencing factors causing unexpected Solitaire stent detachment and the clinical outcomes. Methods : Between October 2011 to December 2013, 232 cases of mechanical Solitaire thrombectomy for acute ischemic stroke were performed in 3 stroke centers. During this period, we encountered unexpected Solitaire stent detachments during mechanical Solitaire thrombectomies in 9 cases. Results : Solitaire stents unexpectedly detached in 9 cases (3.9%) during the retrieval of Solitaire stents. The median patient age was 76 years. The occlusion sites of the unexpected stent detachment were the proximal middle cerebral artery (MCA) in 7 cases and the internal carotid artery in 2 cases. The sizes of the stents that unexpectedly detached were $6{\times}30$ mm in 7 cases, $5{\times}30$ mm in 1 case, and $4{\times}20$ mm in 1 case. Four patients had unexpected detachment at the first retrieval, 1 patient at the second, 3 patients at the third, and 1 patient at the fifth. In all of the cases of unexpected detachment at the first retrieval, the stent deployment site was the proximal MCA. After detachment, a proximal marker of the Solitaire stent was observed in 3 patients. However, no marker was visible in the remaining 6 patients. Conclusion : Unexpected Solitaire stent detachment should be considered in the first instance of stent retrieval for a relatively large-diameter stent, especially in elderly patients with MCA occlusions.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.23 no.2
• /
• pp.137-145
• /
• 2020

Purpose: The Oral-anal Transit Test (OTT) is a simple method of obtaining information about colonic transit. We aim to assess the correlation of OTT with the neuromuscular integrity of the colon determined by colonic manometry (CM). Methods: All patients who had OTT followed by CM were evaluated. Less than 6 of 24 markers remaining on OTT was considered normal. CM was performed per previously published guidelines. A normal CM was defined as at least one High Amplitude Propagating Contraction progressing from the most proximal sensor through the sigmoid colon. Results: A total of 34 patients underwent both OTT and CM (44% male, age 4-18 years, mean 11.5 years, 97% functional constipation +/- soiling, Hirschsprung's Disease). Of normal and abnormal OTT patients, 85.7% (6/7) and 18.5% (5/27) respectively had normal CM. When all markers progressed to at least the sigmoid colon, this was 100% predictive against colonic inertia. Greater than 50% of patients with manometric isolated sigmoid dysfunction had markers proximal to the recto-sigmoid. Conclusion: OTT and CM are both valuable studies that assess different aspects of colonic function. OTT can be used as a screening test to rule out colonic inertia. However, the most proximal extent of remaining markers does not predict the anatomical extent of the manometric abnormality, particularly in isolated sigmoid dysfunction.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.1
• /
• pp.35-41
• /
• 2007

Objective : Determining the location of paraclinoid aneurysms for microsurgery is important for selecting treatment options, especially when deciding on the release of the dural ring in direct clipping. We examined the reliability of using the optic strut as an anatomical landmark for evaluating the location of paraclinoid aneurysms. Methods : Cadaveric dissection was performed to establish the relationship of the optic strut to the dural ring. Results from these anatomic studies were compared with the three-demensional computed tomographic angiographic [3D-CTA] findings of nine patients with ten paraclinoid aneurysms between May 2004 and October 2005. These, 3D-CTA results were then compared with intraoperative findings. Results : The inferior boundary of the optic strut accurately localized the point at the proximal dural ring in cadaveric study. The optic strut and its relationship to the aneurysms was well observed on the multiplanar reformats of 3D-CTA. During microsurgery, nine of ten aneurysms were verified to arise from distal to the upper surface of the optic strut. Two aneurysms that had arisen between the inferior and superior boundary of the optic strut were observed to lie within the carotid cave. One aneurysm which had arisen at the inferior boundary of the optic strut and directed inferiorly was observed to lie within the cavernous sinus just after the release of the proximal ring. Conclusion : The optic strut, as identified with multiplanar reformats of 3D-CTA, provided a reliable anatomic landmark for the proximal rings and an important information about the location of aneurysms around the anterior clinoid process (ACP). Therefore, 3D-CTA and the optic strut could become an invaluable tool and a landmark in the assessment of the location of paraclinoid aneurysms for microsurgery.

• The korean journal of orthodontics
• /
• v.46 no.6
• /
• pp.372-378
• /
• 2016

Objective: The purpose of the present study was to evaluate the postoperative three-dimensional (3D) changes in the proximal segments after mandibular setback sagittal split ramus osteotomy and to compare the changes between the conventional mini-plate fixation and semi-rigid sliding plate fixation. Methods: Cone-beam computed tomography (CBCT) images were used to evaluate the postoperative 3D changes in the proximal segments during the healing process. CBCT images were superimposed using the symphysis and the lower anterior mandible as references. Results: There were no statistically significant differences between the conventional mini-plate and semi-rigid sliding plate groups (p > 0.05). With respect to the distribution of changes greater than 2 mm in the landmarks, the right condylion, right coronoid process, and left condylion showed ratios of 55.6%, 50.0%, and 44.4%, respectively, in the semi-rigid sliding plate group; however, none of the landmarks showed ratios greater than 30% in the conventional mini-plate group. Conclusions: There were no statistically significant differences in postoperative changes in the segments between the conventional mini-plate and semi-rigid sliding plate groups. Nevertheless, while selecting the type of fixation technique, clinicians should consider that landmarks with greater than 2 mm changes were higher in the semi-rigid sliding plate group than in the conventional mini-plate group.

• Imaging Science in Dentistry
• /
• v.30 no.4
• /
• pp.265-274
• /
• 2000

Purpose: The aims of the present study are to determine the optimum compression rate in terms of file size reduction and diagnostic quality of the images after compression and evaluate the transmission speed of original or each compressed image. Materials and Methods: The material consisted of 24 extracted human premolars and molars. The occlusal surfaces and proximal surfaces of the teeth had a clinical disease spectrum that ranged from sound to varying degrees of fissure discoloration and cavitation. The images from Digora system were exported in TIFF and the images from conventional intraoral film were scanned and digitalized in TIFF by Nikon SF-200 scanner (Nikon, Japan). And six compression factors were chosen and applied on the basis of the results from a pilot study. The total number of images to be assessed were 336. Three radiologists assessed the occlusal and proximal surfaces of the teeth with 5-rank scale. Finally diagnosed as either sound or carious lesion by one expert oral pathologist. And sensitivity, specificity and k value for diagnostic agreement was calculated. Also the area (Az) values under the ROC curve were calculated and paired t-test and oneway ANOVA test was performed. Thereafter, transmission time of the image files of the each compression level was compared with that of the original image files. Results: No significant difference was found between original and the corresponding images up to 7% (1 : 14) compression ratio for both the occlusal and proximal caries (p<0.05). JPEG3 (1 : 14) image files are transmitted fast more than 10 times, maintained diagnostic information in image, compared with original image files. Conclusion: 1 : 14 compressed image file may be used instead of the original image and reduce storage needs and transmission time.

• Journal of Korean Foot and Ankle Society
• /
• v.6 no.1
• /
• pp.60-65
• /
• 2002

Purpose: The purposes of the present study were to find the ideal insertion position syndesmosis screw and relation to the surrounding anatomical structures when indirectly inserting the screw anteriorly at a 30 angle at 3 cm proximal portion of the ankle join t. Materials and Methods: We performed computed tomography from the axial view in 20 normal individuals at 3 cm proximal portion of the ankle joint and divided the lateral side of the fibula into 4 sections. We drew a line from the middle of each of these 4 sections to the posterolateral tibia at a 30 angle and determined the relationship between each of these lines and the surrounding anatomical structures and confirmed the site at which each of these 4 lines passed through the posterolateral tibia which divided into 3 sections and the site of the fibula at which each of these lines passed through the middle 1/3 portion of the tibia. Results: The posterior 3/4 portion of the fibula that passed through the middle 1/3 portion of the posterolateral tibia in 18 cases. The portion did not approach the surrounding anatomical structures(Peroneal vessels and the muscular portion of FHL). Conclusion: The ideal insertion position of syndesmosis screw at 3 cm proximal portion of the ankle joint at a 30 angle is the posterior 3/4 portion of the lateral side of the fibula, and injury to the surrounding anatomical structures could be avoided when the screw passes through the middle 1/3 portion of the posterolateral tibia.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.416-422
• /
• 2017

PURPOSE. To investigate the effect of reducing tooth preparation and ceramic thickness on fracture resistance of lithium disilicate crowns. MATERIALS AND METHODS. Specimen preparation included a standard complete crown preparation of a typodont mandibular left first molar with an occlusal reduction of 2 mm, proximal/axial wall reduction of 1.5 mm, and 1.0 mm deep chamfer (Group A). Another typodont mandibular first molar was prepared with less tooth reduction: 1 mm occlusal and proximal/axial wall reduction and 0.8 mm chamfer (Group B). Twenty crowns were milled from each preparation corresponding to control group (n=5) and conditioned group of simultaneous thermal and mechanical loading in aqueous environment (n=15). All crowns were then loaded until fracture to determine the fracture load. RESULTS. The mean (SD) fracture load values (in Newton) for Group A were 2340 (83) and 2149 (649), and for Group B, 1752 (134) and 1054 (249) without and with fatigue, respectively. Reducing tooth preparation thickness significantly decreased fracture load of the crowns at baseline and after fatigue application. After fatigue, the mean fracture load statistically significantly decreased (P<.001) in Group B; however, it was not affected (P>.05) in Group A. CONCLUSION. Reducing the amount of tooth preparation by 0.5 mm on the occlusal and proximal/axial wall with a 0.8 mm chamfer significantly reduced fracture load of the restoration. Tooth reduction required for lithium disilicate crowns is a crucial factor for a long-term successful application of this all-ceramic system.