• ETRI Journal
• /
• v.20 no.3
• /
• pp.251-271
• /
• 1998

It is well known that if usage parameter control/network parameter control (UPC/NPC) functions are used together with a cell loss priority control scheme in ATM networks, the measurement phasing problem can occur. This makes it difficult for a network provider to define and commit the cell loss ratio as a QoS parameter. To solve the problem, we propose a new UPC/NPC algorithm. By using the proposed UPC/NPC algorithm, we can define the cell loss ratios for CLP = 0 and CLP = 0+1 cell streams without the measurement phasing problem under any conditions. We analyzed the performance of the proposed UPC/NPC algorithm. Using a discrete time model for the UPC/NPC architecture with a discrete-time semi-Markov process (DSMP) input model, we obtained the cell discarding probabilities of CLP = 0 and CLP = 0+1 cells streams and showed that more CLP = 0 cells are accepted compared to what was proposed in ITU-T.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.676-679
• /
• 1997

Networking for manufacturing is gaining importance as a nerve system of computer-integrated manufacturing(CIM). Among the various network types, the most inexpensive type called fieldbus is specifically aimed to interconnect simple devices such as sensors and actuators. For this purpose, there are several choices of the protocol such as Profibus, FIP, Foundation Fieldbus, and IEC/ISA fieldbus. This paper presents the simulation results of Profibus and FIP. Both protocols has been simulated in order to evaluate the performance such as transmission delay and throughput under different protocol parameter setting and traffic conditions.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.22-31
• /
• 1989

In this paper, we analyze the performance of the IEEE 802.4 token passing bus protocol through a simulation model of the protocol. In order to analyze performance of the protocol in the initialization, transition and fault recovery states as well as in the steady state, the protocol functions are divided into five processes each of which can effectively simulate protocol behaviors according to the variations of protocol parameters. From the simulation study, we obtain protocol parameters which severely influence the protocol performance and find out that proper selection of the protocol parameter values for token passing is very important to obtain good performance of the protocol when the priority scheme is used.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.3
• /
• pp.95-99
• /
• 2003

In this paper, the power system automation based on CAN communication protocol is introduced. Along with digitalization of electrical device, the various on-line services such as remote control, remote monitoring, remote parameter setting, fault data recording and remote diagnostic have been realized and become available. Therefore, it is necessary for those electrical devices to have real-time and reliable communication protocols. Author proposes DNPC(Distributed Network Protocol with CAN) which is proper to the power system SCADA (Supervisory Control And Data Acquisition) and DCS (Distributed Control System). The physical and datalink layer of DNPC protocol consists of the CAN2.0B which has the real-time characteristics and powerful error control scheme. As the transport and application layer, DNP3.0 is adopted because of its flexibility and compatible feature. Using the DNPC protocol, the power system automation is realized.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.4
• /
• pp.729-738
• /
• 2019

In this paper, we propose two-way authentication protocol between unmanned systems in tactical wireless networks in which long distance communications are not guaranteed due to a poor channel conditions. It is assumed that every unmanned systems have same random data set before they put into combat. The proposed protocol generates authentication code(AC) using random data that causes hash collision. The requester for authentication encrypts the materials such as their identifier, time-stamp, authentication code with the secret key. After then the requester transmits the encrypted message to the receiver. The receiver authenticates the requester by verifying the authentication code included in the request message. The performance analysis of the proposed protocol shows that it guarantees the security for various attack scenarios and efficiency in terms of communication overhead and computational cost. Furthermore, we analyzed the effect of the parameter values of the proposed protocol on the performance and suggest appropriate parameter value selection guide according to the level of security requirement.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.2
• /
• pp.13-24
• /
• 2019

Purpose: CT scan range is insufficient for various reasons in head and neck Tomotherapy^®. To solve that problem, Re-CT simulation is good because CT scan range affects accurate dose calculations, but there are problems such as increased exposure dose, inconvenience, and a change in treatment schedule. We would like to evaluate the minimum CT scan range required by changing the plan setup parameter of the existing CT scan range. Materials and methods: CT Simulator(Discovery CT590 RT, GE, USA) and In House Head & Neck Phantom are used, CT image was acquired by increasing the image range from 0.25cm to 3.0cm at the end of the target. The target and normal organs were registered in the Head & Neck Phantom and the treatment plan was designed using ACCURAY Precision^®. Prescription doses are Daily 2.2Gy, 27 Fxs, Total Dose 59.4Gy. Target is designed to 95%~107% of prescription dose and normal organ dose is designed according to SMC Protocol. Under the same treatment plan conditions, Treatment plans were designed by using five methods(Fixed-1cm, Fixed-2.5cm, Fixed-5cm, Dynamic-2.5cm Dynamic-5cm) and two pitches(0.43, 0.287). The accuracy of dose delivery for each treatment plan was analyzed by using EBT3 film and RIT(Complete Version 6.7, RIT, USA). Results: The accurate treatment plan that satisfying the prescribed dose of Target and the tolerance dose in normal organs(SMC Protocol) require scan range of at least 0.25cm for Fixed-1cm, 0.75cm for Fixed-2.5cm, 1cm for Dynamic-2.5cm, and 1.75cm for Fixed-5cm and Dynamic-5cm. As a result of AnalysisAnalysis by RIT. The accuracy of dose delivery was less than 3% error in the treatment plan that satisfied the SMC Protocol. Conclusion: In case of insufficient CT scan range in head and neck Tomotherapy^®, It was possible to make an accurate treatment plan by adjusting the FW among the setup parameter. If the parameter recommended by this author is applied according to CT scan range and is decide whether to re-CT or not, the efficiency of the task and the exposure dose of the patient are reduced.

• The Journal of Korean Medicine
• /
• v.38 no.1
• /
• pp.46-55
• /
• 2017

Objectives: The aim of this study is reviewing the literature to extract the key parameter, study design, perspective, cost-effectiveness index and find the calibration parameter for the clinical study with economical evaluation protocol on facial palsy. Methods: Literature search is performed using PUBMED for literature published from January 2000 to December 2016. We included randomized controlled trials(RCTs) and modelling study with economic assessment in which human participated. Results: As a result of literature search, the 198 articles were found. After reviewing the title, abstract and full text, the 5 articles were selected. Selected articles are classified into 4 RCT studies dealing with quality of life and 1 CEA(cost-effectiveness analysis) study. Conclusions: We found reliable key parameters, calibration parameters and elements of economical assessment study, which might be necessary factors for developing research protocol of clinical trial with economic evaluation about facial palsy patients.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.899-906
• /
• 2003

In this paper, a channel access control algorithm and a slot allocation algorithm are proposed as MAC protocol for multimedia services in TDMA/TDD-based wireless ATM networks. In the proposed protocol, VBR terminals that require real-time services transmit a reservation request through a random access minislot. VBR terminals, which are successfully transmitted the reservation request, transmits the dynamic parameters through a dynamic parameter minislot without contention. On the other hand, ABR terminals transmit a reservation request with contention basis whenever a non-real-time traffic burst is generated. Based on the received dynamic parameters and the number of requested slots, the base station scheduler allocates a dynamic parameter minislot as well as uplink data slots into VBR terminals. Also the scheduler allocates uplink data slots into ABR terminals in proportion to the number of requested slots.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.30 no.1
• /
• pp.17-28
• /
• 2017

Objectives : The aim of this study is reviewing the literature to extracting the key parameter and finding the calibration parameter for the clinical study with economical assessment protocol on atopic dermatitis. Methods : Literature search is performed using PUBMED for literature published from Janurary 2000 to December 2016. We included randomized controlled trials(RCTs) with economic assessment in which human participants. Results : Among the articles published from January 2000 to December 2016, The 1464 articles were found. After reviewing the title, abstract and full text, the five articles were selected. Selected articles are classified 3 CEA(cost effective analysis)study, 1 CMA(cost minimizing analysis)study and 1 cost analysis study. Conclusions : We found highly reliable key parameters and calibration parameters, which might be necessary factors for developing research protocol of economic evaluation alongside clinical trial about atopic dermatitis patients.

• Journal of information and communication convergence engineering
• /
• v.8 no.1
• /
• pp.40-44
• /
• 2010

opportunistic spectrum access (OSA) allows unlicensed users to share licensed spectrum in space and time with no or little interference to primary users, with bring new research challenges in MAC design. We propose a cognitive MAC protocol using statistical channel information and selecting appropriate idle channel for transmission. The protocol based on the CSMA/CA, exploits statistics of spectrum usage for decision making on channel access. Idle channel availability, spectrum hole sufficiency and available channel condition will be included in algorithm statistical information. The model include the control channel and data channel, the transmitter negotiates with receiver on transmission parameters through control channel, statistical decision results (successful rate of transmission) from exchanged transmission parameters of control channel should pass the threshold and decide the data transmission with spectrum hole on data channel. A dynamical sensing range as a important parameter introduced to maintain the our protocol performance. The proposed protocol's simulation will show that proposed protocol does improve the throughput performance via traditional opportunistic spectrum access MAC protocol.