• Fashion & Textile Research Journal
• /
• v.24 no.5
• /
• pp.655-665
• /
• 2022

This study evaluated the validity of a newly developed mobility protocol examining the comfort functions and requirements of personal protective equipment (PPE) for COVID-19 healthcare workers. Eight males (age: 24.7 ± 3.0 y, height: 173.4 ± 2.3 cm, and body weight 69.9 ± 3.7 kg) participated in the following three PPE conditions: (1) Plastic gown ensemble, (2) Level D ensemble, and (3) Powered air purifying respirator (PAPR) ensemble. The mobility protocol consisted of 10 different tasks in addition to donning and doffing. The 10 tasks were repeated twice at an air temperature of 25oC with 74% RH. The results showed significant differences among the three PPE conditions in mean skin temperature, local skin temperatures (the forehead, thigh, calf, and foot), clothing microclimate (the chest and back), thermal sensation, thermal comfort, and humidity sensation, while there were no significant differences in heart rate or total sweat rate. At rest, the subjects felt less warm and more comfortable in the PAPR than in the Level D condition (P<0.05). However, subjective perceptions in the PAPR and Level D conditions became similar as the tasks progressed and mean skin and leg temperature became greater for the PAPR than the Level D condition (P<0.05). An interview was conducted just after completing the mobility test protocol, and suggestions for improving each PPE item were obtained. To sum up, the mobility test protocol was valid for evaluating the comfort functions of PPE for healthcare workers and obtaining requirements for improving the mobility of each PPE item.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.803-810
• /
• 2011

The public interest of global warming and energy shortage is gradually increased, and the related industries also have become interested in developing eco-friendly material and technology. Warm-mix asphalt (WMA) is a result of the developments to alleviate global warming and energy problems. This WMA is produced at lower temperatures than the temperature at which hot mix asphalt (HMA) is produced. Because most tests in Superpave are developed only for the performance and maintenance of HMA produced by hot temperatures, it is difficult for the tests to identify properly the material properties and then evaluate the performances between HMA and WMA. This study deals with the development of a new protocol to differentiate HMA and WMA performance, and especially the interfacial properties between asphalt and aggregate are targeted as the performance indicator; thus, an evaluation method and guideline are suggested. The concept and idea of the test method applied in this study were modified from the DSR moisture damage test protocol. In addition, TSR test was performed to affirm the relation between the asphalt-aggregate interface and the asphalt-aggregate mixture performances. The followings are the results of this study. Shear stress at 85% linear visco-elastic complex modulus (LVE $G^*$) can be a better parameter than LVE $G^*$, which can assess the interfacial or bonding performance between asphalt and aggregate. Moreover, measuring the bonding performance in thinner film thicknesses will be a better way to evaluate the real and field situation between asphalt and aggregate. The interfacial properties' criteria to apply the newly developed test and parameter should be developed, after the asphalt mixture criteria relating to the interfacial properties are completed.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.315-319
• /
• 1996

We have developed a prototype patient monitoring system including module-based bedside units, interbed network, and central stations. A bedside unit consists of a color monitor and a main CPU unit with peripherals including a module controller. It can also include up to 3 module cases and 21 different modules. In addition to the 3-channel recorder module, six different physiological parameters of ECG, respiration, invasive blood pressure, noninvasive blood pressure, body temperature, and arterial pulse oximetry with plethysmogaph are provided as parameter modules. Modules and a module controller communicate with up to 1Mbps data rate through an intrabed network based on RS-485 and HDLC protocol. Bedside units can display up to 12 channels of waveforms with any related numeric informations simultaneously. At the same time, it communicates with other bedside units and central stations through interbed network based on 10Mbps Ethernet and TCP/IP protocol. Software far bedside units and central stations fully utilizes gaphical user interface techniques and all functions are controlled by a rotate/push button on bedside unit and a mouse on central station. The entire system satisfies the requirements of AAMI and ANSI standards in terms of electrical safety and performances. In order to accommodate more advanced data management capabilities such as 24-hour full disclosure, we are developing a relational database server dedicated to the patient monitoring system. We are also developing a clinical workstation with which physicians can review and examine the data from patients through various kinds of computer networks far diagnosis and report generation. Portable bedside units with LCD display and wired or wireless data communication capability will be developed in the near future. New parameter modules including cardiac output, capnograph, and other gas analysis functions will be added.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.2
• /
• pp.68-78
• /
• 2020

Crop models have been used to predict vegetable crop yield, which would have a considerable economic impact on consumers as well as producers. A small number of models have been developed to estimate growth and yield of vegetables due to limited availability of growth observation data in high-quality. In this study, we aimed to analyze the protocols designed for collection of the observation data for major vegetable crops including cabbage, radish, garlic, onion and pepper. We also designed the protocols suitable for development and verification of a vegetable crop growth model. In particular, different measures were proposed to improve the existing protocol used by Statistics Korea (KOSTAT) and Rural Development Administration (RDA), which would enhance reliability of parameter estimation for the crop model. It would be advantageous to select sampling sites in areas where reliable weather observation data can be obtained because crop models quantify the response of crop growth to given weather conditions. It is recommended to choose multiple sampling sites where climate conditions would differ. It is crucial to collect time series data for comparison between observed and simulated crop growth and yield. A crop model can be developed to predict actual yield rather than attainable yield using data for crop damage caused by diseases and pests as well as weather anomalies. A bigdata platform where the observation data are to be shared would facilitate the development of crop models for vegetable crops.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.767-772
• /
• 2014

As temporary network, ad-hoc network has been effected by structures and implemented environments of networks. In this paper, transmission performance of lattice structure ad-hoc network, which is expected to use in sensor network and IoT(Internet of Things), is analyzed in point of intrusions and countermeasure for intrusion is suggested. In this paper, computer simulation based on NS-2 is used for performance analysis, VoIP(Voice over Internet Protocol) as a widely used service is chosen for performance measure. MOS(Mean Opinion Score) and call connection rate is used as performance parameter. As results of performance analysis, it is shown that for MOS, random network is better then lattice network at intrusion environments, but for call connection rate, lattice network is better then random network.

• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.419-426
• /
• 2009

The WiMedia Alliance has specified a Distributed Medium Access Control (D-MAC) protocol based on UWB for high speed wireless home networks and WPANs. The WiMedia D-MAC fundamentally removes the problems of the centralized MAC revealed at IEEE 802.15.3 MAC, by adopting a distributed architecture. However, there is no completely distributed method for allocating fair data rates to all traffic streams by considering each stream's QoS parameter. In this paper, a novel fair distributed QoS admission control method is proposed. The proposed method is a fair, adaptive QoS provisioning method, by allocating time slots to devices according to the current traffic load condition, through executing only a proposed single satisfaction of QoS (SoQ) algorithm at each device.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.3-12
• /
• 2016

Bluetooth Low Energy (BLE) protocol has attracted attention as a promising technology for low data throughput and low energy wireless sensor networks. Fast device discovery is very important in a BLE based wireless network. It is necessary to configure the network to work with minimized energy consumption because the BLE network nodes are expected to operate a long time typically on a coin cell battery. However, since it is difficult to obtain low energy and low latency at the same time, the BLE standard introduces wide range setting of parameters related to device discovery process and let the network operators to set up parameter values for the application. Therefore, it is necessary to analyze the performance of device discovery according to the related parameter values prior to BLE network operation. In this paper we analyze the expected value and the cumulative distribution function of the number of advertisements for device discovery in the BLE network. In addition, we propose a scheme for controlling the interval between advertising events that can improve the performance of device discovery without increasing energy consumption.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.379-384
• /
• 2010

The service quality is one of the most important issue for successful deployment of IPTV services. Currently, a number of parameters have been reported that they have an effect on the quality of IPTV services. However, it is almost impossible to monitor and manage all the parameters in real time. Key parameters, therefore, should be chosen as a service metric for efficient quality management of IPTV services. For this purpose, we implement an environment for monitoring and measuring the quality of IPTV services and try to figure out the effect of each parameter on the quality of IPTV services. In particular, we focus on a parameter called continuous count error (CCE) measured at the level of MPEG transport stream (TS) and show that it has a greater effect on the quality of IPTV services than other parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.698-706
• /
• 2005

In this paper, we investigate the parameters of the IEEE 802.11e MAC protocol, CWmin and AIFS, in terms of their capability of QoS control. The delay and the bandwidth performances are selected as the QoS medics to examine the characteristics of those parameters. A policy on MAC parameters usage, thereby, is proposed. We regard the MAC-level traffic classification as the differentiation in the channel accessibility, and thus the delay differentiation is referred to a main issue of the class-level QoS control. Realizing the tight relationship between the delay performance and the parameter AIFS, we derive an analytical expression of their relationship through an analysis of the MAC mechanism. Various simulations are examined which show the validity of our assertions, and a policy on the parameters usage is proposed based on those observations.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.543-550
• /
• 2002

This paper proposes the dynamic slot allocation method for real-time VBR (rt-VBR) services in wireless ATM networks. The proposed method is characterized by a contention-based mechanism of the reservation request, a contention-free polling scheme for transferring the dynamic parameters. The base station scheduler allocates a dynamic parameter minislot to the wireless terminal for transferring the residual lifetime and the number of requesting slots as the dynamic parameters. The scheduling algorithm uses a priority scheme based on the maximum cell transfer delay parameter. Based on the received dynamic parameters, the scheduler allocates the uplink slots to the wireless terminal with the most stringent delay requirement. The simulation results show that the proposed method guarantee the delay constraint of rt-VBR services along with its cell loss rate significantly reduced.