• Journal of Communications and Networks
• /
• v.16 no.4
• /
• pp.397-406
• /
• 2014

Radio frequency (RF) jamming is a denial of service attack targeted at wireless networks. In resource-hungry scenarios with constant traffic demand, jamming can create connectivity problems and seriously affect communication. Therefore, the vulnerabilities of wireless networks must be studied. In this study, we investigate a particular type of RF jamming that exploits the semantics of physical (PHY) and medium access control (MAC) layer protocols. This can be extended to any wireless communication network whose protocol characteristics and operating frequencies are known to the attacker. We propose two efficient jamming techniques: A low-data-rate random jamming and a shot-noise based protocol-aware RF jamming. Both techniques use shot-noise pulses to disrupt ongoing transmission ensuring they are energy efficient, and they significantly reduce the detection probability of the jammer. Further, we derived the tight upper bound on the duration and the number of shot-noise pulses for Wi-Fi, GSM, and WiMax networks. The proposed model takes consider the channel access mechanism employed at the MAC layer, data transmission rate, PHY/MAC layer modulation and channel coding schemes. Moreover, we analyze the effect of different packet sizes on the proposed jamming methodologies. The proposed jamming attack models have been experimentally evaluated for 802.11b networks on an actual testbed environment by transmitting data packets of varying sizes. The achieved results clearly demonstrate a considerable increase in the overall jamming efficiency of the proposed protocol-aware jammer in terms of packet delivery ratio, energy expenditure and detection probabilities over contemporary jamming methods provided in the literature.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.9
• /
• pp.17-28
• /
• 2004

Since the Internet has grown into a large communication infrastructure, the network management system to systematically manage the large number of network components has become an essential part of the Internet. The rapid growth of network size has brought into question the scalability of the existing centralized model, such as SNMP (Simple Network Management Protocol) and CMIP (Common Management Information Protocol). Thus, for efficient network management, researches about mobile agent have also been performed recently. This paper presents analytical models of centralized approach based on SNMP protocol, distributed approach based on mobile agent, and mixed mode to make up for shortcomings of SNMP and mobile agent. We compare the performance of these analytical models based on network management response time. Experiment results show that performance of mobile agent and the mixed mode is less sensitive to the delay in WAN network environment. However, SNMP is more efficient for the simple network environment like LAN.

• Journal of Korea Multimedia Society
• /
• v.3 no.2
• /
• pp.174-183
• /
• 2000

Formal methods for protocol description of a system is based on the implementation id S/W. However, the importance of H/W implementation for a parts of protocol design is increasing. The combination between H/W and IP technology is needed since the implementation environment is changing from S/W to H/W for implementation of specific application protocol. H/W implementation method starting with formal description procedure is essential to guarantree correctness and reliability of the implemented H/W by characteristic of formal description language. Inthis paper, for an automated H/W implementations, ESTELLE, a formal description method, is adopted. A transformation method from specification of ESTELLE to VHDL is suggested. This is an conceptual method that comparing and analyzing similarities between basic units of protocol description such as computation and communication unit and inter processors in H/W. Then we describe transformation model, and suggest example of transformation from ESTELLE to VHDL with Inres protocol.

• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.544-553
• /
• 2008

The general sensor network uses bundle method to collect fixed information from sensor node. However, this method is difficult to actively cope with major sensing objects in healthcare environment including status and position change of person and change of surrounding environment. In order to support the healthcare environment, certain information should be provided in accordance with the change of status of person and surrounding circumstance and also must cope with the change of network type by movement of person. This paper analyzes LEACH protocol which guarantees effectiveness of network as it constitutes clusters between Agilla model that is a representative multi agent middle ware and surrounding nodes. Based on the result of this analysis, it suggests LEACH_Mobile protocol which guarantees node mobility that is the weakest point of LEACH protocol. Moreover, it designs mobility agent middleware which supports dynamic function change of node and mobility agent module which supports dynamic function change of mobile node as components of LEACH_Mobile routing module. In addition, it is definitely increase performance which in mobile node of transfer data rate through LEACH_Mobile protocol of simulation result.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3834-3857
• /
• 2021

The design of cluster-based routing protocols is necessary for Wireless Sensor Networks (WSN). But, due to the lack of features, the traditional methods face issues, especially on unbalanced energy consumption of routing protocol. This work focuses on enhancing the security and energy efficiency of the system by proposing Energy Efficient Based Secure Routing Protocol (EESRP) which integrates trust management, optimization algorithm and key management. Initially, the locations of the deployed nodes are calculated along with their trust values. Here, packet transfer is maintained securely by compiling a Digital Signature Algorithm (DSA) and Elliptic Curve Cryptography (ECC) approach. Finally, trust, key, location and energy parameters are incorporated in Particle Swarm Optimization (PSO) and meta-heuristic based Harmony Search (HS) method to find the secure shortest path. Our results show that the energy consumption of the proposed approach is 1.06mJ during the transmission mode, and 8.69 mJ during the receive mode which is lower than the existing approaches. The average throughput and the average PDR for the attacks are also high with 72 and 62.5 respectively. The significance of the research is its ability to improve the performance metrics of existing work by combining the advantages of different approaches. After simulating the model, the results have been validated with conventional methods with respect to the number of live nodes, energy efficiency, network lifetime, packet loss rate, scalability, and energy consumption of routing protocol.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.237-242
• /
• 2014

Recently, wind energy is expanding to combination of computing to forecast of wind power generation as well as intelligent of wind powerturbine. Wind power is rise and fall depending on weather conditions and difficult to predict the output for efficient power production. Wind power is need to reliably linked technology in order to efficient power generation. In this paper, distributed power generation forecasts to enhance the predicted and actual power generation in order to minimize the difference between the power of distributed power short-term prediction model is designed. The proposed model for prediction of short-term combining the physical models and statistical models were produced in a physical model of the predicted value predicted by the lattice points within the branch prediction to extract the value of a physical model by applying the estimated value of a statistical model for estimating power generation final gas phase produces a predicted value. Also, the proposed model in real-time National Weather Service forecast for medium-term and real-time observations used as input data to perform the short-term prediction models.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.405-411
• /
• 2002

Open interfaces in the optica] Internet have been progressed by OIF's ISI, ITU-T ASTN's CCI and IETF's GSMP extensions with optical switching. These open interfaces enable the separation between the control plane and the optical transport plane. This separation allows flexibility in the network, but it suffers more setup delay than the traditional switch-by-switch connection setup. We propose the parallel interworking model, which will reduce the connection setup delay in the open interface of optical Internet. Based on the switch controller's caching capability about networks states, the parallel interworking procedures between signaling protocol and GSMP protocol are performed in the switch controller. We simulated and evaluated our proposed parallel interworking model and the existing sequential interworking model in terms of a connection setup delay and a completion ratio. We observed that the completion ratios of the two interworking models were quite close. However the connection setup delay of parallel interworking model is improved by about 30% compared with that of the sequential interworking model.

• Journal of the Korea Society for Simulation
• /
• v.29 no.3
• /
• pp.73-82
• /
• 2020

In the fourth industrial revolution, wireless sensor networks (WSNs) are an important element of collecting and analyzing data in a variety of environments without human intervention. This sensor network is greatly affected by topology and routing protocols. Routing protocols, which affect energy consumption, are executed after deploying sensor nodes. Once built, they are difficult to change. Before the WSN is deployed, a routing protocol is carefully selected in view of various environments and the performance of the protocol is evaluated. In this paper, we propose a model to simulate multiple routing protocols using a discrete event system specification (DEVS). The DEVS-based proposed model simulates various situations without changes and structures of the its model as algorithms of the routing protocols are implemented in its coordinators model. To verify normal behaviors of the proposed model, the number of report delivery and the energy consumption of the sensor network were compared using representative protocols LEACH and Dijkstra. As a result, it was confirmed that the proposed model executes normally in both routing protocols.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.221-227
• /
• 2013

RFID is an automatic identification technology that can control a range of information via IC chips and radio communication. Also known as electronic tags, smart tags or electronic labels, RFID technology enables embedding the overall process from production to sales in an ultra-small IC chip and tracking down such information using radio frequencies. Currently, RFID-based application and development is in progress in such fields as health care, national defense, logistics and security. RFID structure consists of a reader that reads tag information, a tag that provides information and the database that manages data. Yet, the wireless section between the reader and the tag is vulnerable to security issues. To sort out the vulnerability, studies on security protocols have been conducted actively. However, due to difficulties in implementation, most suggestions are concerned with theorem proving, which is prone to vulnerability found by other investigators later on, ending up in many troubles with applicability in practice. To experimentally test the security of the protocol proposed here, the formal verification tool, CasperFDR was used. To sum up, the proposed protocol was found to be secure against diverse attacks. That is, the proposed protocol meets the safety standard against new types of attacks and ensures security when applied to real tags in the future.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.3
• /
• pp.199-215
• /
• 2015

Objective: The purpose of this study is to find the level of physical relaxation of individual subject by monitoring psychophysiological biofeedback to different types of mattresses. And, the study also aims to find a protocol to make a selection of the best mattress based on the measured information. Background: In Korea, there are an increasing number of people using western style bed. However, they are often fastidious in choosing the right mattress for them. In fact, people use their past experience with their old mattress as well as the spontaneous experience they encounter in a show room to finally decide to buy a bed. Method: Total five mattresses were tested in this study. After measuring the elasticity of the mattresses, they were sorted into five different classes. Physiological and psychological variables including Electromyography (EMG), heart rates (HR), oxygen saturations (SaO2) were used. In addition, the peak body pressure concentration rate was used to find uncomfortably pressured body part. Finally, the personal factors and subjective satisfaction were also examined. A protocol was made to select the best mattress for individual subject. The selection rule for the protocol considered all the variables tested in this study. Results: The result revealing psychological comfort range of 0.68 to 0.95, dermal comfort range of 3.15 to 6.07, back muscle relaxation range of 0.25 to 1.64 and personal habit range of 2.0 to 3.4 was drawn in this study. Also a regression model was developed to predict biofeedback with the minimal use of biofeedback devices. Moreover results from the proposed protocol with the regression equation and subjective satisfaction were compared with each other for validation. Ten out of twenty subjects recorded the same level of relaxation, and eight subjects showed one-level difference while two subjects showed two-levels difference. Conclusion: The psychophysiological variables and suitability selection process used in this study seem to be used for selecting and assessing ergonomic products mechanically or emotionally. Application: This regression model can be applied to the mattress industry to estimate back muscle relaxation using dermal, psychophysiology and personal habit values.