• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.103-110
• /
• 2008

When there is uncertainty in topological rate of change, motility model and terrain condition, the performance severely degrades in MANET. The concept of transition of routing protocol on the fly according to the network parameters such as coverage, connectivity and mobility etc. may counterbalance the problems stated above. The mathematical modeling of feedback parameters has been derived, and the architecture for the multi-routing protocol system providing an adaptation from one routing protocol to another is also investigated. This paper is extensively devoted on the analysis of mobility, connectivity and their effects on the network and finally transition into another routing protocol according to them.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.141-149
• /
• 2013

IETF 6LoWPAN standard technique has been studied in IoT environment to support the IPv6 packet communication. 6LoWPAN protocol for transmission of packets mainly in the AODV routing protocol and a variety of extended techniques have been investigated. In particular, consisting of nodes with limited resources in a network error occurs when the 6LoWPAN reliable data transfer and fast routing method is needed. To this end, in this paper, we propose resilient routing protocol and extension of IETF LOAD algorithm, for optimal recovery path, More specifically, the optimal recovery path setup algorithm, signal flow, and detailed protocols for the verification of the reliability of packet transmission mathematical model is presented. The proposed protocol techniques to analyze the performance of the NS-3 performance through the simulation results that is end-to-end delay, throughput, packet delivery fraction and control packet overhead demonstrated excellence in comparison with existing LOAD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.153-161
• /
• 2005

In a multi-channel network based of wavelength division multiplexing (WDM) technology, an efficient protocol is needed in order for the transmitter and receiver to be tuned to the same wavelength during message transmission time. This paper proposes a priority-based reservation protocol that can efficiently support variable-length messages that require different QoS requirements. In this proposed protocol, high-priority nodes can reserve the data channel before low-priority nodes. However, once a node reserves a data channel successfully, it can persistently use the reserved channel till message transmission is finished regardless of the priority of the node. Moreover, the protocol can operate independently of the number of nodes, and any new node can join the network anytime without requiring network re-initialization. The protocol is analyzed with a finite population model and the throughput-delay characteristics are investigated as performance measures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.378-384
• /
• 2008

The sensor network for the health care application service has the man or movable object as the main sensing object. In order to support inter-node interaction by the movement of such sensing objects, the node's dynamic function modification, dynamic self-configuration and energy efficiency must be considered. In this paper, the Agilla model which supports the dynamic function modification through the agent migration between nodes and LEACH protocol which guarantees the dynamic self-configuration and energy efficiency through the configuration of inter-node hierarchical cluster configuration are analyzed. Based on the results of the analysis, the Mobility Agent Middleware which supports the dynamic function modification between nodes is designed, and LEACH_Mobile protocol which guarantees the node nobility as the weakness of the existing LEACH protocol is suggested. Also, the routing module which supports the LEACH_Mobile protocol is designed and the interface for conjunction with Mobility Agent Middleware is designed. Then, it is definitely increase performance which un mobility node of transfer data rate through LEACH_Mobile protocol of simulation result.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.2
• /
• pp.57-72
• /
• 2010

Hash based RFID protocols proposed by Ha and M.Burmester is a scheme that tag's ID is updated using hash function to provide forward secrecy after session end. But this protocols have a problem both privacy and efficiency. This paper analyze a problem for privacy to apply a privacy game model proposed by Vaudenay. we analyze the cause that these scheme is difficult with tag's cheap implementation and efficient resynchronization. To solve these problems, we proposed a new hash based mutual authentication protocol which apply only two protocol's advantages. this protocols is based of resynchronization algorithm for Ha et al.'s protocol and added a new simple counter to record the numner of continuous desynchronization between tag and reader secret informations. this counter is more simple than cyclic counter proposed by M. Burmester's protocol. Also, we prove that proposal protocol improve a privacy against a privacy attack which is executed for Ha and M. Burmester's protocols.

• The KIPS Transactions:PartC
• /
• v.18C no.5
• /
• pp.331-338
• /
• 2011

The RFID system includes a section of wireless communication between the readers and the tags. Because of its vulnerability in terms of security, this part is always targeted by attackers and causes various security problems including the leakage of secret and the invasion of privacy. In response to these problems, various protocols have been proposed, but because many of them have been hardly implementable they have been limited to theoretical description and theorem proving without the accurate verification of their safety. Thus, this study tested whether the protocol proposed by Kenji et al. satisfies security requirements, and identified its vulnerabilities such as the exposure of IDs and messages. In addition, we proposed an improved RFID security protocol that reduced the number of public keys and random numbers. As one of its main characteristics, the proposed protocol was designed to avoid unnecessary calculations and to remove vulnerabilities in terms of security. In order to develop and verify a safe protocol, we tested the protocol using Casper and FDR(Failure Divergence Refinements) and confirmed that the proposed protocol is safe in terms of security. Furthermore, the academic contributions of this study are summarized as follows. First, this study tested the safety of a security protocol through model checking, going beyond theorem proving. Second, this study suggested a more effective method for protocol development through verification using FDR.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.925-928
• /
• 2007

Abilities of sensing and communication are vested in private things of actual space, therefore, Ubiquitous Computing which is offered various services with human approach will be common in the future society. For the realization of this Ubiquitous Service requires some technique such as situations of environment and recognition of locations by the Sensor Network, then sensor data have to be transferred to an application service after processes. However, there are some hindrances for communication between an application service and sensor data, these are that accessibility of data usefulness and problems of Platform and protocol in each sensors. In this paper, suggest a reference model that is independent from platform and implementation language, for USN application service with using standardized protocol.

• 한국정보컨버전스학회:학술대회논문집
• /
• 2008.06a
• /
• pp.47-52
• /
• 2008

A radio-frequency identification(RFID) tag is a small, inexpensive microchip that emits an identifier in response to a query from a nearby reader. The price of these tags promises to drop to the range of $0.05 per unit in the next several years, offering a viable and powerful replacement for barcodes. The challenge in providing security for low-cost RFID tags is that they are computationally weak devices, unable to perform even basic symmetric-key cryptographic operations. Security researchers often therefore assume that good privacy protection in RFID tags is unattainable. In this paper, we explore a notion of minimalist cryptography suitable for RFID tags. We consider the type of security obtainable in RFID devices with a small amount of rewritable memory, but very limited computing capability. Our aim is to show that standard cryptography is not necessary as a starting point for improving security of very weak RFID devices. Our contribution is threefold: 1. We propose a new formal security model for authentication and privacy in RFID tags. This model takes into account the natural computational limitations and the likely attack scenarios for RFID tags in real-world settings. It represents a useful divergence from standard cryptographic security modeling, and thus a new view of practical formalization of minimal security requirements for low-cost RFID-tag security. 2. We describe protocol that provably achieves the properties of authentication and privacy in RFID tags in our proposed model, and in a good practical sense. Our proposed protocol involves no computationally intensive cryptographic operations, and relatively little storage. 3. Of particular practical interest, we describe some reduced-functionality variants of our protocol. We show, for instance, how static pseudonyms may considerably enhance security against eavesdropping in low-cost RFID tags. Our most basic static-pseudonym proposals require virtually no increase in existing RFID tag resources.

• Journal of the Korean Magnetics Society
• /
• v.23 no.2
• /
• pp.54-61
• /
• 2013

Ferromagnetic material's residual magnetization is remained because of the interaction between domains from external apply field, so the electrical and electronic industry and area of defense development request deperm protocol which makes the residual magnetization to 0. But the deperm protocols which are used theses days are developed by using only experience and experiment, so we have to develop deperm protocol considering hysteresis curve. In this paper, Anhysteretic Deperm, Deperm-ME, Flash-Deperm were analyzed using two dimensional finite element method and Preisach model that was formulated by property of magnetic materials. From that analysis, the relations between hysteresis curve and deperm variable are compared by analyzing the trace of Preisach plane. Also, an efficient current ratio of deperm protocol, is proposed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.3
• /
• pp.216-223
• /
• 2005

A computer clock has limits in accuracy and precision affected by its inherent instability, the environment elements, the modification of users, and errors of the system. So the computer clock needs to be synchronized with a standard clock if the computer system requires the precise time processing. The purpose of synchronizing clocks is to provide a global time base throughout a distributed system. Once this time base exists, transactions among members of distributed system can be controlled based on time. This paper discusses the integrated approach to clock synchronization. An embedded system is considered for time synchronization based on the GPS(Global Positioning System) referenced time distribution model. The system uses GPS as standard reference time source and offers UTC(Universal Time Coordinated) through NTP(Network Time Protocol). A clock model is designed and adapted to keep stable time and to provide accurate standard time with precise resolution. Private MIB(Management Information Base) is defined for network management. Implementation results and performance analysis are also presented.