• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.372-381
• /
• 2019

In this study, the National Disaster Management System (NDMS) was analyzed to evaluate the disaster impact assessment standards for steep slopes. Problems in the assessment methods and systems were discovered, which could be reasons for poor reliability. The disaster-risk evaluation index needs improvement to evaluate various types of retaining walls, such as concrete/reinforced soil walls and reinforcing stone masonry. Additionally, using the same score for overturning, bulging, and efflorescence could be reasons for poor reliability, and different weighting factors are needed. Assessment methods are needed to subdivide the social influence evaluation index while considering environmental conditions of steep slopes, such as railroads and reservoirs. For the evaluation of steep slopes, standards for start and end points of steep slopes should be created for effective management, and disaster impact assessment needs to be performed after redevelopment from an advanced index for protection and reinforcement. These problems were derived from a current evaluation system, so a disaster impact assessment is necessary to supplement the results of this study.

• The Journal of the Korea Contents Association
• /
• v.22 no.6
• /
• pp.638-651
• /
• 2022

Last year, a new perception of the right to peace on the Korean Peninsula was adopted: DMZ Yanggu Peace Declaration 2021. The Declaration reflects that there is a raising of necessity for a new perception and approach from the perspective of DMZ-related laws, sustainable ecological environment and security. Gangwon is making considerable efforts to make the border area in DMZ as an area of peace by continuously enhancing publicity on the establishment of the 'Peace Special Self-Governing Province'. This study suggests the necessity of a paradigm shift towards the significance of the interkorean border region that it should function as a passage between the South and the North rather than a dam. For, to be renewed as a sustainably developing region through newly constructed flow of communication, the wall of hostility must preliminarily fall dawn. Then a question arises about how Gangwon is, out of other border region, most eligible for the reconsideration of its significance as a border area. The answer relies on the newly established agenda and understandings towards the right to peace in the perspective of founding the policy for the Unification of the Korean Peninsula. Furthermore, the conservation of DMZ ecological environment through enlistment of UNESCO Biosphere Reserve should go hand in hand with the ultimate value of global agenda of the conservation and protection of the environment. The study insists that the peace zone is a prerequisite for the adaption of the era of future-oriented glocalization featured by the Fourth Industrial Revolution. Up to this date, the border area was an area of pain and agony. It is time for Gangwon to be reborn as an area of peace and coexistence. The aim of this study is to point a direction for Gangwon to become a sustainably developing region by illuminating the value of the Gangwon border area as a new area of peace.

• The Journal of Art Theory & Practice
• /
• no.8
• /
• pp.59-87
• /
• 2009

This thesis started from the attempt to make it clear that 80's American artist Keith Haring(1958-1990) had conducted social intervention of criticism, resistance, and participation through his works, and so pursued public value. Haring of graffiti fame left popular and familiar cartoon style pictures on the street wall, the billboards, the posters and so on. Popular and playful works was explained as his unique characteristics, but Haring's creative way at the field has more value than just being grasped as artist's personal characteristics. Haring's work pieces became everyday art by joining with people's life, and are working as a social speaking place. So I think that these Haring's art works possess characteristics of 'the public sphere'. 'The Public Sphere' means that is independent and free from the government or partisan economic forces, so that is not connected with the interested relations, and that is the sphere of rational argumentation without 'disguise' or 'fabrication', and that is the sphere where general public can participate in and is inspected by them. The public sphere between the sphere of public authority such a nation and a market and the private sphere of free individual, it is mutually connected with them and works as the space forming public opinion. Private individuals communicate with this public sphere and perform a role of direct and indirect check, balance, and social criticism way off from power. Openness that should include the voice of not only leading power but also the socially weak such as citizens, women, homosexuals, minority races, and so on, and alienated class, is an index of the public characteristics. The public sphere is not working just with speech and mass media. Many artists as well as Haring open their mouth and act through an art at the center of society, and create another public sphere by an art. I understood that the real participatory and practical characteristics on the Haring's work is a phenomenon and current of a part of the art world including Haring. Such current started from 1960s is the in-depth effort to be connected with the life more closely, to communicate with people, and to improve problems of life. And it has pursued public value on the different way from the nation or public power. Artists have intervened in the society with strategic and positive ways in order to raise pushed-out value and sinked rights as the public agenda, and labored to accept the value of variety and difference at the society. The aspect of such social intervention is the notable features, findable on the Haring's works and process. Haring's works include art historical meanings and are expressed with familiar and plastic language, so they were able to communicate with various classes. And he secured various customers at the field and the street. This communicative and public approach factor raised the possibility much for his works to work as the public sphere. Haring presented critical and resistant speech toward society with his works based on this factor. He asserted his position and justice of gender identity as a sexual minority. And his such work continued to movement for alienated class and social week over his own rights. His speech and message on the wall painting, poster, T-shirts, billboard of the subway, and so on worked as a spectacle and pressed concern with social issues and consciousness shift. And he's been trying to protect and care people who is injured by HIV and drug and to realize social justice through social week protection. Haring's works planned to meet many people as much as possible performed its role of intervening in society through criticism, resistance, speech, and participation, and controlling and checking social issues. These things considered, Haring's works show his consciousness about public attributes of art, and obviously include public value seeking. And also we can find the meaning of such his work as that an art is working as the public sphere and shows the possibility to discuss and practice public issues.

• Journal of Radiation Protection and Research
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2002

High energy photon beams from medical linear accelerators produce large scattered radiation by various components of the treatment head, collimator and walls or objects in the treatment room including the patient. These scattered radiation do not provide therapeutic dose and are considered a hazard from the radiation safety perspective. Scattered dose of therapeutic high energy radiation beams are contributed significant unwanted dose to the patient. ICRP take the position that a dose of 500mGy may cause abortion at any stage of pregnancy and that radiation detriment to the fetus includes risk of mental retardation with a possible threshold in the dose response relationship around 100 mGy for the gestational period. The ICRP principle of as low as reasonably achievable (ALARA) was recommended for protection of occupation upon the linear no-threshold dose response hypothesis for cancer induction. We suggest this ALARA principle be applied to the fetus and testicle in therapeutic treatment. Radiation dose outside a photon treatment filed is mostly due to scattered photons. This scattered dose is a function of the distance from the beam edge, treatment geometry, primary photon energy, and depth in the patient. The need for effective shielding of the fetus and testicle is reinforced when young patients ate treated with external beam radiation therapy and then shielding designed to reduce the scattered photon dose to normal organs have to considered. Irradiation was performed in phantom using high energy photon beams produced by a Varian 2100C/D medical linear accelerator (Varian Oncology Systems, Palo Alto, CA) located at the Yonsei Cancer Center. The composite phantom used was comprised of a commercially available anthropomorphic Rando phantom (Phantom Laboratory Inc., Salem, YN) and a rectangular solid polystyrene phantom of dimensions $30cm{\times}30cm{\times}20cm$. the anthropomorphic Rando phantom represents an average man made from tissue equivalent materials that is transected into transverse 36 slices of 2.5cm thickness. Photon dose was measured using a Capintec PR-06C ionization chamber with Capintec 192 electrometer (Capintec Inc., Ramsey, NJ), TLD( VICTOREEN 5000. LiF) and film dosimetry V-Omat, Kodak). In case of fetus, the dosimeter was placed at a depth of loom in this phantom at 100cm source to axis distance and located centrally 15cm from the inferior edge of the $30cm{\times}30cm^2$ x-ray beam irradiating the Rando phantom chest wall. A acryl bridge of size $40cm{\times}40cm^2$ and a clear space of about 20 cm was fabricated and placed on top of the rectangular polystyrene phantom representing the abdomen of the patient. The leaf pot for testicle shielding was made as various shape, sizes, thickness and supporting stand. The scattered photon with and without shielding were measured at the representative position of the fetus and testicle. Measurement of radiation scattered dose outside fields and critical organs, like fetus position and testicle region, from chest or pelvic irradiation by large fie]d of high energy radiation beam was performed using an ionization chamber and film dosimetry. The scattered doses outside field were measured 5 - 10% of maximum doses in fields and exponentially decrease from field margins. The scattered photon dose received the fetus and testicle from thorax field irradiation was measured about 1 mGy/Gy of photon treatment dose. Shielding construction to reduce this scattered dose was investigated using lead sheet and blocks. Lead pot shield for testicle reduced the scatter dose under 10 mGy when photon beam of 60 Gy was irradiated in abdomen region. The scattered photon dose is reduced when the lead shield was used while the no significant reduction of scattered photon dose was observed and 2-3 mm lead sheets refuted the skin dose under 80% and almost electron contamination. The results indicate that it was possible to improve shielding to reduce scattered photon for fetus and testicle when a young patients were treated with a high energy photon beam.

• Proceedings of the KSEEG Conference
• /
• 2001.05b
• /
• pp.42-63
• /
• 2001

The detail survey on the Songsanri tomb site including the Muryong royal tomb was carried out during the period from May 1 , 1996 to April 30, 1997. A quantitative analysis was tried to find changes of tomb itself since the excavation. Main subjects of the survey are to find out the cause of infiltration of rain water and groundwater into the tomb and the tomb site, monitoring of the movement of tomb structure and safety, removal method of the algae inside the tomb, and air controlling system to solve high humidity condition and dew inside the tomb. For these purposes, detail survery inside and outside the tombs using a electronic distance meter and small airplane, monitoring of temperature and humidity, geophysical exploration including electrical resistivity, geomagnetic, gravity and georadar methods, drilling, measurement of physical and chemical properties of drill core and measurement of groundwater permeability were conducted. We found that the center of the subsurface tomb and the center of soil mound on ground are different 4.5 meter and 5 meter for the 5th tomb and 7th tomb, respectively. The fact has caused unequal stress on the tomb structure. In the 7th tomb (the Muryong royal tomb), 435 bricks were broken out of 6025 bricks in 1972, but 1072 bricks are broken in 1996. The break rate has been increased about 250% for just 24 years. The break rate increased about 290% in the 6th tomb. The situation in 1996 is the result for just 24 years while the situation in 1972 was the result for about 1450 years. Status of breaking of bircks represents that a severe problem is undergoing. The eastern wall of the Muryong royal tomb is moving toward inside the tomb with the rate of 2.95 mm/myr in rainy season and 1.52 mm/myr in dry season. The frontal wall shows biggest movement in the 7th tomb having a rate of 2.05 mm/myr toward the passage way. The 6th tomb shows biggest movement among the three tombs having the rate of 7.44mm/myr and 3.61mm/myr toward east for the high break rate of bricks in the 6th tomb. Georadar section of the shallow soil layer represents several faults in the top soil layer of the 5th tomb and 7th tomb. Raninwater flew through faults tnto the tomb and nearby ground and high water content in nearby ground resulted in low resistance and high humidity inside tombs. High humidity inside tomb made a good condition for algae living with high temperature and moderate light source. The 6th tomb is most severe situation and the 7th tomb is the second in terms of algae living. Artificial change of the tomb environment since the excavation, infiltration of rain water and groundwater into the tombsite and bad drainage system had resulted in dangerous status for the tomb structure. Main cause for many problems including breaking of bricks, movement of tomb walls and algae living is infiltration of rainwater and groundwater into the tomb site. Therefore, protection of the tomb site from high water content should be carried out at first. Waterproofing method includes a cover system over the tomvsith using geotextile, clay layer and geomembrane and a deep trench which is 2 meter down to the base of the 5th tomb at the north of the tomv site. Decrease and balancing of soil weight above the tomb are also needed for the sfety of tomb structures. For the algae living inside tombs, we recommend to spray K101 which developed in this study on the surface of wall and then, exposure to ultraviolet light sources for 24 hours. Air controlling system should be changed to a constant temperature and humidity system for the 6th tomb and the 7th tomb. It seems to much better to place the system at frontal room and to ciculate cold air inside tombs to solve dew problem. Above mentioned preservation methods are suggested to give least changes to tomb site and to solve the most fundmental problems. Repairing should be planned in order and some special cares are needed for the safety of tombs in reparing work. Finally, a monitoring system measuring tilting of tomb walls, water content, groundwater level, temperature and humidity is required to monitor and to evaluate the repairing work.

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.457-464
• /
• 2005

The purpose of our study was to investigate whether the intrapulpal temperature during cavity preparation of enamel or dentin with Er:YAG laser still remained in range of safety for dental pulp protection when combined with appropriate water flow rate. The effect of different pulse repetition rates at the same pulse energy during ablation was evaluated as well. Caries-free, restoration-free extracted human molar teeth were prepared for the specimen and divided two experimental groups of enamel and dentin. Each group comprised 5 specimens and each of tooth specimens were embedded into a resin block each and measuring probe was placed on the irradiated pulpal walls. For experiments of dentin ablation, enamel layers were prepared to produce dentin specimen with a same dentin thickness of 2 mm. A pulse energy of Er:YAG laser was set to 300 mJ and three different pulse repetition rates of 20 Hz, 15 Hz and 10 Hz were employed. Laser beam was delivered with 3 seconds and less per application over enamel and dentin surfaces constant sized by $3\;mm{\times}2\;mm$ and water spray added during irradiation was a rate of 1.6 ml/min. Temperature change induced by Er:YAG laser irradiation was monitored and recorded While enamel was ablated, there was no significant difference of temperature related to pulse repetition rates(p=0.358) and temperature change at any pulse repetition rate was negligible. Significant statistical difference in temperature changes during cavity preparation in dentin existed among three different pulse groups(p=0.001). While temperature rise was noticeable when the dentinal wall was perforated, actual change of temperature due to Er:YAG laser irradiation was not enough to compromise safety of dental pulp when irradiation was conjugated with appropriate water spray. Conclusively, it can be said that cavity preparation on enamel or dentin with an Er:YAG laser is performed safely without pulp damage if appropriate volume of water is sprayed properly over the irradiated site.

• Journal of the Korean Society of Costume
• /
• v.15
• /
• pp.177-194
• /
• 1990

Koh(袴) was a type of dress worn on the lower part of the body which was commonly used in the Northeast Asia. It was originally used by the Northern race for the need of nomadism or hunting. The origin of the Koh which appeared in the area would be found from the trousers of the Huns who influenced in the Northeast Asia, and became in the part of the Scythian culture. The Scythians are the nomadizing race inhabited in the Northern Caucasas on the wast of the Black Sea and influenced on the inland Eurasian steppe as the first typical horse-riding race. The objectives of Koh which had been worn in the Scythian, Mongolia, Korea as well as Japan as a part of Dongho dress and ornaments and to contemplate the transmission process by cultural exchange among different races for the period from 4th century to 7th century. 1. The Origination of the Koh The Koh was originated by the environmental factor to protect the cold in the North but also from the heat in the South, and was changed and developed as gradually satisfying to the needs of the times. In the Northeast Asia the Koh was in the class of the Northern Chinese garment, and was used widely by the horse riding Scythians who moved widely from the Eurasian inland to Japan. The oldest original which could reflect the type of the Northern clothes was a pair of trousers discovered in the Huns remains of Noin Ula. This showed the exact form of hunting clothes and had a similar form with the Korean female tro-users. Since the same form of trousers drawn on the wall painting of which was excavated 4-5th century ancient Koguryo(高句麗) tomb was the same form the trousers of Noin Ula seemed to be the original form of Koh in the Northeast Asia. 2. The Chinese Trousers It was the time of the King Mooryung(武靈王) in the Cho(趙) Dynasty B.C. 3th century that the trousers used regularly in China. However, the Koh had been used as undergarment which functioned for the protection of the cold not the horseriding garment. The trousers seemed to be not very obviously shown off since the Poh (袍) was long, but mainly used by the people from lower class. As people learned the adapted the trousers. It was essential for the times of war and quarrel. The king himself started wearing the Koh. The Chinese trousers were influenced by the Huns, the Northern clothes of the Scythian culture, and similar to the Korean clothes. 3. The Korean Trousers Korean was a race bared from the Eastern foreign group. It was obvious that the clothes was Baji-Jeogori(바지 저고리), the garment of the Northern people. This had the same form of the Scythian dress and ornaments which was excavated from the Mongolian Noin Ula. The Scythian dress and ornaments were influenced from the Ancient West Asia Empire and transmitted to the Northeast Koguryu by the horseriding Scythian. The trousers were kept in the traditional style by the common people in Korea were transmitted to Japan which were for behind in cultural aspect, as well as got used to the Chinese as the efficient clothes though active cultural exchange. 4. The Japanese Trousers The ancient Japanese clothes were influenced by the Southern factor but not the form of the Koh. As the Korean people group was moving towards Japan and conquer the Japanese in the 4-5th century, however, North Altaic culture was formed and at the same time the clothes were also developed. The most influenced clothes at this time were those of Baekge(百濟) and the trousers form called Euigon became the main form. Because of the climatic regional factor, it was tied not at the ankle but under the knee. From the view the ancient Japanese clothes disappeard about that time, it could be due to the conquest of the culturally superior race but not the transmission of the culture. In the latest 7th century both the Chinese and Japanese dress forms were present, but the Dongho(東胡) dress and its ornament from Korea was still the basic of the Japanese dress form.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.279-287
• /
• 2018

Sealants are an important element of modern architecture and serve as a building protection against weathering by providing barriers against ingress of moisture, air, and other materials. Exposure to a variety of environments often reduces lifespan due to changes in physical, chemical and mechanical characteristics, and UV, humidity, and temperature expansion are important issues that are directly related to durability. In this study, a combined deterioration test chamber was developed to simulate the environment of the open air as an instrument for verifying the durability of structural sealing materials indoors. In order to replicate special weather conditions, such as yellow dust, acid rain, and contamination by microorganisms, it was deemed impossible to replicate the outdoor environment by 100 %, and the results of the results of the results of the external exposure test of the structural sealant and the combined deterioration testing device. As a result of the displacement test of the outdoor exposure test, it was determined that the sealant was breaking apart and that it would be smooth, and the displacement would be up to three times greater than the initial material value of 1 year. The displacement test results of the combined deterioration test device show the tendency to deteriorate, decreasing the elasticity and tensile characteristics. In the case of denatured silicon, the current 400 cycles have been completed to confirm 12 months of degradation of the external exposure. The deformation of the test specimen cannot be verified with the naked eye, so it is considered that the conditions of the specimen are more stable than the silicon sealant. As a result of the outdoor exposure test, if the combined deterioration test device is structured and proposed in the relevant guidance or specification, the anticipated lifespan of 12 months in the actual use environment can be verified indoors and below 3 months later, economically.

• The Korean Journal of Mycology
• /
• v.22 no.1
• /
• pp.50-61
• /
• 1994

From soil samples, 380 antagonistic microorgnisms were isolated. Among the isolates, 42 strains had mycelia growing inhibition ability against Fusariun solani, ginseng root rot causing pathogen. Isolates CHA 1 and S-PFHR 6 were proposed as antagonists for this study and they were identified as Promicromonospora sp. and Pseudomonas pseudoalcaligenes respectively. As an antagonism against hyphae of F. solani in dual culture test, CHA 1 and S-PFHR 6 inhibited linear growing, caused abnormal branching, and the membrane projection which formed by cell wall destruction. The secondary metabolites contained in the culture filtrates which prepared from PD broth and Nutrient broth inhibited the spore germination to 14.3%. The culture filtrate of S-PFHR 6 which prepared by a little amount of soil extract addition to nutrient rich medium had more strongly. inhibited the spore germination and spore germination decreased to less than 4.0% in it. The soil used in this study had fungistasis and the germination rate of macroconidia and chlamydospore of F.solani was 19.4% and 17.7% respectively. The steam sterilized soil lost fungistasis and germination rate of conidia increased to more than 97.9%. The soils amended with the propagule of CHA 1 and S-PFHR 6 increased fungistasis and the germination rate of macroconidia decreased to 14.7% and 11.7% respectively in each treatments. But the soil ammended with glucose and asparagine annulled fungistatic ability and the germination rate of macroconidia increased to more than 48.0%. As an antagonistic activity of the secondary metabolites of two antagonistic isolates in soil, the germination rate of macroconidia of F. solani was 9.3% in the soil amended with the culture filtrate of CHA 1 but the culture filtrate of S-PFHR 6 had no such activity. In the soil which treated with antagonist propagule or culture filtrate, the chlamydospore germination rate was lower than that in natural soil. The addition of glucose and asparagine to antagonist propagule treated soil did not enhanced the chlamydospore germination.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.3
• /
• pp.13-24
• /
• 2016

What are the roles and functions of urban gardening created by citizens in Sujin 2-dong, Seongnam-si? This study has looked into urban gardening in everyday life in a bid to find possible solutions for sustainable urban regeneration. The paper has examined the types, functions, and characteristics of urban gardens in Sujin 2-dong, where the urban restoration project is in progress. This study has conducted primarily on-site inspections and interviews. The research findings are as follows. Most urban gardens in Sujin 2-dong have a vertical structure rather than a regular ground-based one due to lack of land. Six major locations of building a garden include the front of a building, rooftop, top of a gate, stairs, wall, and yard. Rooftop gardens are most common and are built mostly for production purposes. Due to architectural characteristics of this village, there are relatively many stair gardens built mostly for aesthetic purposes. The garden in front of a building has served multiple functions, including formation of entry, privacy protection, and prevention of unauthorized parking. Other than those, detached houses have quality urban gardens built with greater effort and care, while multi-household houses have seen a decrease of stair gardens and an increase of vertical gardens due to their comparatively limited space. By utilizing this research, we hope to show that it is important to understand the local's wisdom and voice for a sustainable urban environment as well as keep these findings in mind during the construction of new buildings. This study would be expected to be useful as primary research for urban gardening in everyday life and alternative ways of urban regeneration.