• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.851-859
• /
• 2021

Small PWR can be used for power generation and heating. Considering that small PWR has the characteristics of flexible operating conditions and complex operating environment, the controller designed based on single power level is difficult to achieve the ideal control of small PWR in the whole range of core power range. To solve this problem, a flexible switching controller based on fuzzy controller and LQG/LTR controller is designed. Firstly, a core fuzzy multi-model suitable for full power range is established. Then, T-S fuzzy rules are designed to realize the flexible switching between fuzzy controller and LQG/LTR controller. Finally, based on the core power feedback principle, the core flexible switching control system of small PWR is established and simulated. The results show that the flexible switching controller can effectively control the core power of small PWR and the control effect has the advantages of both fuzzy controller and LQG/LTR controller.

• The KIPS Transactions:PartC
• /
• v.10C no.2
• /
• pp.155-162
• /
• 2003

Fast restoration time and service guarantee are the important goals to achieve the network reliability. In the protection switching scheme, one way to guarantee service fro an application session if a network happens to fail is to establish the restoration path that amounts to the same bandwidth of the working path of the session at the same time. When we setup the restoration path, we can reduce the bandwidth consumption by the restoration path if the path can share the bandwidth required by the other paths. This paper explains the methods how to determine the shared bandwidth of the restoration path in the protection switching scheme, given the maximum bandwidth assigned to a link along the working path. We point out that such sharing algorithm can not reduce the bandwidth consumption by the restoration paths in some cases, which contradict the general conception. We explain why this can happen, and show the simulation results in real network topologies to prove our arguments. We explain the reason of the failure of the sharing effect by the simple sharing algorithm. Finally we propose the way of how we can overcome the failure of the sharing effect, using the complete sharing algorithm based on the link database and showing the results.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2597-2600
• /
• 1999

Semiconductor devices can be series stacked for the application of high voltage switching. It can provide high reliability and long lifetime by the safe design with a reasonable margin. The equal voltage distribution at solid-state switches in series should be guaranteed. Static and dynamic voltage division, over current protection must be considered carefully in the design stage. A fast switching thyristor is a good candidate for the high power pulse applications. A high voltage switching module is designed and tested. Its specifications are working voltage of 70 kV, switching pulse width of 120${\mu}s$, peak switching current of 220A, maximum repetition rate of 200pps. The module can be series connected to get higher working voltage. This paper presents the design details and the test results are compared with expected circuit simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.1
• /
• pp.23-29
• /
• 1983

This paper describes object-based operating system to suppeor relability and abstract data type. For reliability, all objects should be accessed through access rights in capability, and the protection domain is provided for all program modules such that efficient domain switching can be achieved. For abstract data type, type manager is provided.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.272-277
• /
• 1990

A soft switched matrix converter is proposed by adopting the zero voltage switching technique being used in some resonant pole inverters. High operating frequency with safe and efficient switching improves dynamic and spectral performances and simplifies protection logics and snubber networks. Further, it can be implemented using simple analog circuits, having similar transfer characteristics to those of the modern pulse width modulated matrix converters such as, maximum voltage transfer ratio and unity input displacement factor. Analyses, design and simulation results are presented to verify the operating principle.

• Journal of Power Electronics
• /
• v.9 no.6
• /
• pp.835-844
• /
• 2009

In this paper a new buck-boost type DC-DC converter is presented. Its voltage gain is positive, all active elements operate under soft-switching condition independent of loading, magnetic isolation and self output short-circuit protection exist, and very fast dynamic operation is achievable by a simple bang-bang controller. This converter also exhibits appropriate PFC characteristics since its input current is inherently proportional to the source voltage. When the voltage source is off-line, it is sufficient to add an inductor after the rectifier, then near unity power factor is achievable. All essential guidelines to design the converter as a DC-DC and a PFC regulator are presented. Simulation and experimental results verify the developed theoretical analysis.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.669-672
• /
• 1992

The increasing application of Vacuum Circuit-Breakers (VCB) on utility and industrial systems has prompted and detailed investigation of vacuum switching surge mechanisms and protections. This paper arranges arc-extinguishing principles of magnetic field in vacuum in order to disperse rapidly arc generated from vacuum contacts on switching VCR and plans establishment of protection means to protect high-voltage motor against surge voltage magnitude and transient voltage rate of rise

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1245-1249
• /
• 2017

Recently, unusual transformer failures have been reported in 25kV power systems connected with a VCB and transformer. In this study, performance of the protection system, dielectric strength of the transformers, characteristics of switching surges and resonance phenomena were analysed and assessed. All investigations regarding the insulation breakdown of the transformers were carried out by simulations, laboratory tests, factory tests and on-site measurements in order to thoroughly investigate the root causes. Furthermore, experimental methods for investigating the resonance phenomenon were derived and tests were conducted applying the derived method to recreate the phenomenon in the transformer. It is found that resonance between the transformer and switching surge generated by closing a VCB can initiate the breakdown of internal windings of a transformer.

• Journal of Power Electronics
• /
• v.10 no.2
• /
• pp.125-131
• /
• 2010

Switched-resonator converters are a new family of soft switching DC-DC converters where the energy is transferred via a resonator. This paper introduces some isolated topologies of this family. The achieved advantages include, load independent soft-switching, self short-circuit protection, and optimization capability due to topology variety. Compared to conventional series-resonant converters, outstanding advantages such as a smaller fewer number of switches and diodes, a smaller transformer, and lower current stresses are achieved. A general synthesis scheme, functional topologies, and essential relations are included. Experimental results from a laboratory prototype confirm the presented theoretical analysis.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.608-611
• /
• 2001

This paper is indicating the problems, which are the conduction loss on the high frequency transformer, the protection of rectification diode as the snubber loss and the stress of switching main devices, as be made high current and high speed in the phase-shift switching full-bridge DC-DC converter is used the power supply's main circuit of high capacity. In this paper, to improve those problems, it is proposed that is the resonant circuit auxiliary can be reduced conduction losses and stabilized output control. And, it is constructed prototype of the power supply as the result of computer simulations.