• Title/Summary/Keyword: protection layer

검색결과 527건 처리시간 0.031초

비탈면의 생태복원을 위한 연속섬유보강토의 적용성에 관한 연구 (A Study on the Use of a Continuous Fiber Soil Reinforcement System to Revegetate a Cut Slope)

  • 고정현;허영진;이용구;김남춘
    • 한국환경복원기술학회지
    • /
    • 제13권3호
    • /
    • pp.73-83
    • /
    • 2010
  • A technology using continuous fiber soil reinforcement system for the creation of ecological restoration in a damaged area has been developed and introduced. The continuous fiber soil reinforcement system (Geofiber system) is an environmentally friendly slope protection technique that continuous fiber soil reinforced layers are constructed with green plantation on cut slope. The characteristics of this system in terms of the strength and hydraulic performance, and the vegetation were investigated in this study. The main objectives of this comparative study was to quantify the potential contribution of geofiber system for the revegetation on the cut slope in a damaged area. A Geofiber system was constructed to reinforce the lower layer of slopes and revegetation methods including wood chips were carried out on the upper layer by machineries. The results of monitoring during 3 years on cut slopes were as follows : 1) All the quadrat existed in the proper range for vegetation. 2) Species richness was 4.4 (site-1) and 18.5 (site-2) respectively. 3) The averaged coverage rates of quadrats was 90%. It is remarkable that the continuous fiber soil reinforcement system would be capable of applying to a damaged area and also would serve maintaining a healthier environment for floras. However, it behooves to continue monitoring on succession of vegetation for ecological restoration.

UAV 기반 열적외선 카메라를 이용한 태양광 모듈 고장진단 실험 (Test of Fault Detection to Solar-Light Module Using UAV Based Thermal Infrared Camera)

  • 이근상;이종조
    • 한국지리정보학회지
    • /
    • 제19권4호
    • /
    • pp.106-117
    • /
    • 2016
  • 최근 환경보호와 신재생에너지 확보 일환으로 태양광발전소가 널리 보급되고 있으며, 태양광 모듈의 효율적인 관리를 위해서는 정기적인 점검이 필요하다. 본 연구에서는 UAV 기반 열적외선 카메라와 GIS 공간분석을 통해 태양광 모듈에 대한 고장여부를 진단할 수 있는 실험을 실시하였다. 먼저 고정익 UAV와 RGB 카메라를 이용하여 영상을 촬영한 후 Pix4D SW를 통해 정사영상을 생성하였으며, 정사영상 자료를 이용하여 태양광 모듈 레이어를 구축한 후 코드를 입력하였다. 또한 태양광 모듈 고장여부를 진단하기 위해 고무덮개를 태양광 모듈에 설치하였으며, 열적외선 카메라로부터 얻어진 온도 정보와 태양광 모듈 레이어를 기반으로 Zonalmean 함수를 통해 태양광 모듈별 평균온도를 계산할 수 있었다. 마지막으로 GIS 공간분석을 통해 이상 발열이 확인된 $37^{\circ}C$ 이상의 모듈을 자동으로 추출하고 각 모듈별 고유식별 코드를 식별함으로써 고무 덮개를 설치한 모듈의 위치를 정확하게 분석할 수 있었다.

안전한 모바일 와이맥스 네트워크를 위한 보안 구조 연구 (An Approach for Improving Mobile WiMAX Security - ROSMEX Architecture)

  • 손태식;구본현;최효현
    • 대한전자공학회논문지TC
    • /
    • 제47권1호
    • /
    • pp.25-34
    • /
    • 2010
  • IEEE 802.16-2004 표준은 MAC 계층 안에 PKM(Privacy Key Management)라 불리는 보안 부계층을 가지고 있다. 하지만, 몇몇 연구에서 IEEE 802.16-2004 표준의 취약성이 대두되었으며 IEEE 802.16 WG은 로밍과 핸드오프 기능을 가진 Mobile WiMAX라고 불리는 IEEE 802.16 개정 표준안을 발표하였다. 보안기능으로서 Mobile WiMAX는 PKMv2를 가지며 EAP 인증, AES 기반 암호화, CMAC/HMAC을 사용한 메시지 인증 등을 제공한다. 그러나 Mobile WiMAX 표준안의 보안 기능은 SS와 BS간 통신 보안에 초점을 맞추어서 네트워크 도메인간의 보안 문제나 핸드오버시 보안과 같은 네트워크 구조적 취약성을 여전히 가지고 있다. 따라서 본 논문에서는 현재 Mobile WiMAX 네트워크 환경의 보안 취약성을 네트워크 엔트리 과정, 네트워크 도메인간 통신 과정, 그리고 핸드 오프 과정으로 나누어 분석하였고, 이렇게 분석된 내용을 바탕으로 본 논문에서는 RObust and Secure MobilE WiMAX (ROSMEX)라 불리는 새로운 Mobile WiMAX 보안 구조를 제시하였다.

성견에서 발치 직후 Hydroxylapatite의 축조와 조직 유도 재생술이 발치와의 골조직 치유에 미치는 영향 (EFFECT OF HYDROXYLAPATITE SYNTHETIC GRAFT AND GUIDED TISSUE REGENERATION TECHNIQUE ON HEALING OF EXTRACTION SOCKET IN MONGREL DOGS)

  • 한동후;심준성
    • 대한치과보철학회지
    • /
    • 제34권1호
    • /
    • pp.187-200
    • /
    • 1996
  • After loss of tooth, initial healing process is critical to preserve residual alveolar process. This study was conducted to compare the effect of hydroxylapatite particle synthetic graft and guided tissue regeneration procedure on healing of extraction wounds in 5 mongrel dogs. To investigate the maturity of bone and velocity of bone heating, bone-labeled tracers were used. After 16 weeks healing period, dogs were sacrificed. The specimens were treated with Villanueva bone stain. Fluorescence microscopy and polarized microscopy were performed to exam the pattern of bone formation in the extraction socket. The results were following ; 1. Pattern of bone regeneration in the group of hydroxylapatie graft and the group of membrane protection after hydroxylapatite graft was following ; bone regeneration was slow, regenerated bone was immature, and thickness of cortical layer was thin compare to that of untreated control group. 2. Cortical layers in membrane protected group were somewhat thicker but less condense to that of untreated control group. 3. Infiltration of inflammation cells were found in the groups using hydroxylapatite graft and membrane. We concluded that grafting of replamineform hydroxylapatite particles into the extraction socket delayed healing of the wound and disturbed the formation of cortical bone at the roof of extraction socket. The placement of expanded polytetrafluoroethylene membranes on the extraction socket promotes the bone regeneration. But newly formed bone in cortical layer consists of the cortico-cancellous bone in comparison with the cortical bone of the control group.

  • PDF

출력기반 적응제어기법을 이용한 틸트로터 항공기의 회전익 모드 설계연구 (Flight Control of Tilt-Rotor Airplane In Rotary-Wing Mode Using Adaptive Control Based on Output-Feedback)

  • 하철근;임재형
    • 한국항공우주학회지
    • /
    • 제38권3호
    • /
    • pp.228-235
    • /
    • 2010
  • 본 논문에서는 틸트로터 항공기의 회전익 모드에 대한 자율비행 유도제어 알고리즘을 적응제어기법을 이용하여 설계하는 것이다. 이를 위해 우선 출력기반 근사적 궤환선형화 기법을 통하여 알고리즘의 내부루프를 구성하고 그로부터 발생하는 모델오차를 단일 은닉층-신경망을 적용하여 상쇄하였다. 그리고 리아푸노프 안정성 이론에 따른 적응제어 갱신법칙은 선형 관측기를 기반으로 설계하였다. 나아가 외부루프는 경로점 유도법칙으로부터 생성되는 궤적을 추종하도록 하였으며 특히 엄밀한 자동착륙 궤적추종 성능 향상을 위하여 방향각 및 비행경로각 시선유도법칙을 설계하였다. 틸트로터 비선형 모델 시뮬레이션 결과는 콜렉티브 입력에서 보이는 순간적인 작동기 포화현상 이외에는 만족할 만한 안정성과 추종성능을 보여 주고 있다.

NGN에서 QoS 제공을 위한 GMPLS의 라우팅 및 시그널링 화장 연구 (A Study of Routing and Signaling Extensions of GMPLS for QoS Provision in NGN)

  • 장석기;박광채
    • 한국정보통신학회논문지
    • /
    • 제7권5호
    • /
    • pp.925-933
    • /
    • 2003
  • 네트워크는 IP 계층과 광 계층이 수렴되는 광인터넷 네트워크로 진화할 것으로 예상되나, 현재의 기술수준으로 인해 과도적인 진화단계로서 GMPLS가 대두되었다. MPLS가 확장되고 일반화된 GMPLS는 패킷 교환 장치뿐만 아니라 시간, 파장 및 공간 영역에서 교환을 수행하는 장치까지 지원할 수 있도록 하고 있다. 이런 다양한 스위칭 타입에 공통적인 제어 평면을 구현하기 위해 GMPLS에서는 기존의 MPLS 신호 및 라우팅 프로토콜을 확장하게된다. 본 논문에서는 GMPLS 기술의 개요와 MPLS에서 링크의 상태 정보를 교환하기 위해 사용되었던 OSPF(Open shortest Path First) 프로토콜을 광 네트워크에서 다양한 링크 타입, 대역폭, 링크 보호 타입 등의 정보를 주고받기 위한 라우팅 확장 방안에 대하여 알아보고, 두 노드간의 수백, 수천개의 링크를 관리하는 복잡한 문제를 해결하기 위한 신호 프로토콜로 LMP라는 새로운 프로토콜의 정의를 기술한다. 그리고 MPLS에서 트래픽 엔지니어링을 위한 신호 프로토콜인 RSVP-TE를 GMPLS에 적용하기 위한 신호 프로토콜의 확장 방안과 수정된 RSVP 관련 메시지들을 검토분석 한다.

Compression characteristics of filling gangue and simulation of mining with gangue backfilling: An experimental investigation

  • Wang, Changxiang;Shen, Baotang;Chen, Juntao;Tong, Weixin;Jiang, Zhe;Liu, Yin;Li, Yangyang
    • Geomechanics and Engineering
    • /
    • 제20권6호
    • /
    • pp.485-495
    • /
    • 2020
  • Based on the movement characteristics of overlying strata with gangue backfilling, the compression test of gangue is designed. The deformation characterristics of gangue is obtained based on the different Talbot index. The deformation has a logarithmic growth trend, including sharp deformation stage, linear deformation stage, rheological stage, and the resistance to deformation changes in different stages. The more advantageous Talbot gradation index is obtained to control the surface subsidence. On the basis of similarity simulation test with gangue backfilling, the characteristics of roof failure and the evolution of the supporting force are analyzed. In the early stage of gangue backfilling, beam structure damage directly occurs at the roof, and the layer is separated from the overlying rock. As the working face advances, the crack arch of the basic roof is generated, and the separation layer is closed. Due to the supporting effect of filling gangue, the stress concentration in gangue backfilling stope is relatively mild. Based on the equivalent mining height model of gangue backfilling stope, the relationship between full ratio and mining height is obtained. It is necessary to ensure that the gradation of filling gangue meets the Talbot distribution of n=0.5, and the full ratio meets the protection grade requirements of surface buildings.

Localization of cytoskeletal proteins in Pneumocystis carinii by immuno-electron microscopy

  • Yu, Jae-Ran;Pyon, Jae-Kyong;Seo, Min;Jung, Byung-Suk;Cho, Sang-Rock;Lee, Soon-Hyung;Hong, Sung-Tae
    • Parasites, Hosts and Diseases
    • /
    • 제39권1호
    • /
    • pp.13-21
    • /
    • 2001
  • Pneumocystis carinii causes serious pulmonary infection in immuno-suppressed patients. This study was undertaken to observe the cytoskeletal proteins of P. carinii by immune-electron microscopy. P. carinii infection was experimentally induced by immunosuppression of Sprague-Dawley rats for seven weeks, and their lungs were used for the observations of this study. The gold particles localized actin, tropomyosin, and tubulin. The actin was irregularly scattered in the cytoplasm of the trophic forms but was much more concentrated in the inner space of the cell wall of the cystic forms called the inner electron-lucent layer No significant amount of tropomyosin was observed in either trophic forms or cystic forms. The tubulin was distributed along the peripheral cytoplasm and filopodia of both the trophic and cystic forms rather than in the inner side of the cytoplasm. Particularly, in the cystic forms, the amount of tubulin was increased and located mainly in the inner electron-lucent layer of the cell wall where the actin was concentrated as well. The results of this study showed that the cell wall of P carinii cystic forms is a structure whose inner side is rich in actin and tubulin. The location of the actin and tubulin in P. carinii suggests that the main role of these proteins is an involvement in the protection of cystic forms from the outside environment by maintaining rigidity of the cystic forms.

  • PDF

MCFC 양극측에서 Al-Cr피복 스테인레스강 분리판의 내식성평가 (Evaluation of Corrosion Resistance on Al-Cr Coated Stainless Steel Separator for MCFC at Anode Side)

  • 이민호;윤재식;배인성;윤동주;김병일;박형호
    • 한국재료학회지
    • /
    • 제13권2호
    • /
    • pp.126-132
    • /
    • 2003
  • In order to evaluate the corrosion resistance at the anode side separator for molten carbonate fuel cell, STS316 and SACC-STS316 (chromium and aluminum were simultaneously deposited by diffusion into STS316 authentic stainless steel substrate by pack-cementation process) were applied as the separator material. In case of STS316, corrosion proceeded via three steps ; a formation step of corrosion product until stable corrosion product, a protection step against corrosion until breakaway occurs, a advance step of corrosion after breakaway. Especially, STS316 would be impossible to use the separator without suitable surface modification because of rapid corrosion rate after formation of corrosion product, occurs the severe problem on stability of cell during long-time operation. Whereas, SACC-STS316 was showed more effective corrosion resistance than the present separator, STS316 due to the intermetallic compound layer such as NiAl, Ni3Al formed on the surface of STS316 specimen. And it is anticipated that, in order to use SACC-STS316 alternative separator at the anode side, coating process, which can lead to dense coating layer, has to be developed, and by suitable pre-treatment before using it, very effective corrosion resistance will be achieved.

난지도에 인접한 한강변에서의 쌍극자-쌍극자 전기탐사 (Dipole-Dipole Resistivity Survey on the Side of Han River near Nanjido Landfill)

  • 이기화;권병두;오석훈;김차섭
    • 자원환경지질
    • /
    • 제29권3호
    • /
    • pp.335-343
    • /
    • 1996
  • The dipole-dipol electrical resistivity survey was conducted to investigate the probable contamination of the Han river by leachate from the near-by Nanjido Landfill. The survey line of 3 km was set along the unpaved road toward the Han river. For the convenience of the field work, the survey line was divided into four segments. The complete two-dimensional resistivity section was constructed by connecting the inversion result of each segment. Gravity survey was also carried out along the profile parallel to the resistivity line. Near surface resistivity generally appeared to be of very low value in most part of the survey area and the boundary between the alluvium layer and underlying basement rocks is well discriminated on the resistivity section. These results agree well with those of the preceding Schlumberger depth sounding made at adjacent area by Lee and fun (1995). The variation of thickness of the alluvium layer delineated by gravity anomaly profile also correlates well with the result of the resistivity survey on the qualitative basis. The problem of contamination by leachate from the Nanjido Landfill, where various waste materials have been dumped without any proper treatment facilities, has been remains unsolved yet. Therefore, we present the most probable passages of leachate flow based on the survey results and have briefly discussed about measure for contamination control. Considering the thickness of alluvium and the possible existence of fractured zone, the middle point between 1st and 2nd landfill and the midst of 1st landfill are the most hazardous regions to make leachates flow into the Han river. Since large amounts of leachates are observed from the test wells located on the lines extending from the border between the 1st and 2nd landfill and the middle of the lst landfill, contamination protection barriers are strongly recommended near these regions.

  • PDF