• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.21-26
• /
• 2011

Differences among cultivars, conditions of nutrient solution, nursing materials, and soilless culture systems were investigated to select suitable cultivar and cultivation methods for stable production of summer spinach in the highlands. The 'Quinto' spinach showed the earliest growth and highest yield. For yield increase of summer spinach, optimal solution pH was 6.0, EC was $2.0dS{\cdot}m^{-1}$, and $NH_4-N$ ratio of nutrient solution was 30 percent Stand rate of spinach in nursing seedlings, at 200-cell-tray filled with mixed nursing soil (peat : perlite = 7 : 3), was higher than those grown in urethane sponge and rock-wool plug. Yield was also 18 to 24 percent higher than those in rock-wool plug and urethane sponge. Plant length and yield of spinach in mixed substrate (peat : perlite = 7 : 3) filled nutrient film technique (MSNFT) system were longer of 18 percent, and higher of 9 percent than those in deep flow technique (DFT) system, respectively. However, changes of root zone temperature, pH and EC showed similar pattern with DFT. Therefore, growing 'Quinto' cultivar at 6.0 of pH, $2.0dS{\cdot}m^{-1}$ of EC, 30 percent of $NH_4-N$ ratio, at 200-cell-tray filled with mixed nursing soil, and MSNFT cultivation system, was the best for production of summer spinach in the highlands.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.2
• /
• pp.145-149
• /
• 2003

Manufacturing facilities of the pharmaceuticals must meet certain level of the cleanness required so that foreign substances such as dust, moisture, heat, microorganism, or virus do not contaminate the product. In case of radiopharmaceuticals for medical treatment and diagnosis, not only should the operators and environment be protected from radiation but also need to be isolated from the foreign contaminant. Therefore, manufacturing facilities for radiopharmaceuticals must satisfy the design standards of both hot cell and clean room which are specified by GMP. However, standards of maintaining negative pressure for preventing spread of radioactive contaminant in isolated facilities conflict with the standards of maintaining positive pressure for keeping cleanness. To solve this problem, air pressure of hot cell was designed lower than in the adjacent area to meet standards of the radiation safety. To keep higher cleanness in certain part of the hot cell for filling, minimal relative positive pressure allows. In order to effectively maintain the cleanness that is required for production of Tc-99m generator, which takes 70% of whole demand of radiopharmaceuticals, the rooms placed in each side of production room are used as a buffer area and three lead hot cells are installed in production room. In this research, we established the appropriate engineered design concept for Tc-99m generator manufacturing facility, which satisfies both GMP cleanness standard for preventing particles, bacteria, other contaminants and the regulations of radiation safety for supervising and controlling the amount of radiation exposure and exhausted radioactivity. And the concept of multi-barrier buffer zones is introduced to apply negative air pressure for hot cell with first priority and to continue relative positive air pressure for clean room.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.41-46
• /
• 2016

Bacterial fruit blotch (BFB) caused by Acidovorax avenae subsp. citrulli is defective disease to watermelon cultivated areas. To control of BFB, we investigated control efficiency to use commercial antibacterial pesticides. Growth inhibition zone on medium were formed as oxolinic acid WP and oxytetracycline WP. Control efficacy of four anti-bacterial pesticides on seed and seedling stage were performed. As a results, oxytetracyclin WP is shown over 90% control efficiency on seed and acibenzolar-S-methyl + mancozeb WP shown over 90% control efficiency on seedling stage Hot-water treatment method could be possible to reduced infection rate on seed. The conditions of hot-water treatments are $50{\sim}55^{\circ}C$ on 20~30 minutes. These results suggested that the methods were helpful watermelon seedling nursery to control of the bacterial fruit blotch by A. avenae subsp. citrulli.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.4
• /
• pp.249-254
• /
• 2007

Inoculation dose of agriculturally important microbes is an important criterion that decides the establishment and hence their effects on plant growth. Effects of the inoculation dose of Azospirillum brasilense strain CW903 on the growth and nutrient absorption of three different crops, tomato, rice and red pepper were assessed under green house condition. Three different concentrations of A. brasilense strain CW903 ($10^5$, $10^6$ and $10^8cfu\;mL^{-1}$) were applied through seed treatment and through the soil near the root zone (1 mL per plant) at 20 and 30 days after sowing. Positive effects on the growth of tomato, rice and red pepper were found at $10^6$ and $10^8cfu\;mL^{-1}$ inoculation doses of A. brasilense strain CW903. The inoculation dose of $10^8cfu\;mL^{-1}$ of A. brasilense strain CW903 recorded the best effects on growth parameters like shoot and root length and the absorption of important nutrients.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.473-483
• /
• 2014

In this work, the effects of shade combination, shade height and wind regime on greenhouse climate were quantified. A two-dimensional (2-D) computational fluid dynamics (CFD) model was developed based on an 11-span plastic greenhouse in eastern China for wind almost normal to the greenhouse orientation. The model was first validated with air temperature profiles measured in a compartmentalized greenhouse cultivated with mature lettuce (Lactuca sativa L., 'Yang Shan'). Next, the model was employed to investigate the effect of shade combinations on greenhouse microclimate patterns. Simulations showed similar airflow patterns in the greenhouse under different shade combinations. The temperature pattern was a consequence of convection and radiation transfer and was not significantly influenced by shade combination. The use of shade screens reduced air velocity by $0.02-0.20m{\cdot}s^{-1}$, lowered air temperature by $0.2-0.8^{\circ}C$ and raised the humidity level by 0.9-2.0% in the greenhouse. Moreover, it improved the interior climate homogeneity. The assessment of shade performance revealed that the external shade had good cooling and homogeneity performance and thus can be recommended. Furthermore, the effects of external shade height and wind regime on greenhouse climate parameters showed that external shade screens are suitable for installation within 1 m above roof level. They also demonstrated that, under external shade conditions, greenhouse temperature was reduced relative to unshaded conditions by $1.3^{\circ}C$ under a wind speed of $0.5m{\cdot}s^{-1}$, whereas it was reduced by merely $0.5^{\circ}C$ under a wind speed of $2.0m{\cdot}s^{-1}$. Therefore, external shading is more useful during periods of low wind speed.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.10
• /
• pp.691-697
• /
• 2014

Though the upper stream basin area of Gwanpyung-Cheon in Daejeon, Korea is protected as Green Belt Zone, the stream is under constant environmental pressure due to current agricultural practices and infrastructure development in its basin area. To develop appropriate integrated water resources management plan for the stream, it is necessary to consider not only water quality problems but also water quantity aspect. In this study, Storm Water Management Model (SWMM) was calibrated and validated with sets of field measurements to predict for future water flow and water quality conditions for any rainfall event. While flow modeling results showed good agreement by showing correlation coefficient is greater than 0.9, water quality modeling results showed relatively less accurate levels of agreements with correlation coefficient between 0.67 and 0.87. Hypothetical basin development scenarios were developed to compare effect on stream water quality and quantity when Low Impact Development (LID) technologies are applied in the basin. The results of this study can be used effectively in decision making processes of urban development Gwanpyung-Cheon area by comparing basin management alternatives such as LID methods.

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.2
• /
• pp.43-63
• /
• 1989

Various kinds of corrosion prevention methods have been developed. It is known that the method of electrochemical protection is more effective and economical than any other method on the large scale metal structures in corrosive solutions. Strong acid solutions such as nitric and sulfuric acid solutions are often used in industries, and the expensive stainless steel is almost exclusively used for the equipment that comes in contact with such acid solutions. However, it is more reasonable that carbon steel is used rather than stainless steel depending upon concentration of those acid solutions from the economical viewpoint. In this study, the typical strong acid solution such as nitric and sulfuric acid solutions are chosen for the experiment and the selected materials of specimen are the stainless steels of SUS 304L and SUS 316L, the carbon steels of SS 41, SM 50 and RA 32, and highly pure lead. Electrochemical protection diagrams can be drawn with data from the external cathodic and anodic polarization curves of SUS 304L, SUS 316L and SM 50 steels in 5-60% nitric acid solutions and from those polarization curves of SS 41, RA 32, SM 50 and SUS 316L steels, and highly pure lead in 2.5-98% sulfuric acid solutions at the slow scanning rate. The data obtained with using the determination method of the optimum cathodic protection potential, the Tafel extrapolation method and the characteristics of anodic polarization curves. The main results obtained from the diagrams are as follows: 1) In nitric acid solution : (1) Corrosion potentials exist in each of those corrosion zones on the stainless steels in the lower concentration than about 12% solutions and on the high tensile strength steels in the lower concentration than about 30% solutions, but the corrosion current (density) in each zone is small on the above mentioned former steels and large on the latter ones. (2) The stainless steels can be self-passivated in the higher concentration than 15% solutions, and the high tensile strength steels gives rise to the same phenomenon in the higher concentration than 35% solutions. (3) The stainless steels in the lower concentration than 60% solutions and the high tensile strength steels in the higher concentration than 35% solutions can be used without protection, but the latter steels must ve protected anodically in the lower conccentration than about 30% solutions. 2) In sufuric acid solution : (1) The carbon steels can be self-passivated in the higher concentration than 45% solutions, and the SUS 316L steel in higher concentration than 75% solutions and the lead in all concentration solutions also gives rise to the same phenomenon. (2) The lead in the lower concentration than 80% solutions and the SUS 316L steel in the higher concentration than 80% solutions can be used without protection. (3) The carbon steels in the higher concentration than 50% solutions also can be used without protecting economically, but the SUS 316L steel in the 20-70% solutions are considerably corrosive without protecting anodically.

• Korean Journal of Environment and Ecology
• /
• v.21 no.5
• /
• pp.379-389
• /
• 2007

This study was carried out to classify forest vegetation structure of Mt. Gaya from April to October in 2006 using phytosociological analysis methodology of Z-M schools. One hundred study sites(quadrat) were surveyed in the area. The forest vegetation was classified into 3 community groups such as Pinus densiflora community group, Cornus controversa community group and artificial forest group. P, densiflora community group was subdivided into 4 communities such as Rhododendron schlippenbachii community. Salix gracilistyla community, Meliosma oldhamii community and P. densiflora typical community. R. schlippendbachii community was subdivided into Potentilla dickinsii group(subdivided into Carpinus coreana subgroup and Melandrynum firmum subgroup) and R. schlippenbachiitypical group. Cornus controversa community group was also subdivided into 4 communities such as Hovenia dulcis community, Quercus aliena community, Ribes maximowicianum community and C. controversa typical community. Artificial forest type indicated 3 communities such as Larix leptolepis community, Pinus rigida community and Castanea crenata community. Accordingly, the vegetation pattern of the surveyed areas were classified into 3 community groups, 11 communities, 2 groups, and 2 subgroups and the forest vegetation was classified into 13 units in total. It is also believed that C. coreana subgroup and M. oldhamii community could be a source for a significant basic data for making vegetation hierarchy and forest distribution zone in the Korean peninsula. H. dulcis community was also considered to be one of the important genetic resources; therefore, those distribution areas are required to be institutionally protected and managed in the near future.

• Korean Journal of Social Welfare Studies
• /
• v.49 no.1
• /
• pp.221-262
• /
• 2018

This study aims to explore life experiences associated with poverty and discrimination in processes of growth, career exploration, entry into the labor market, and career accumulation of the working high school graduate youths. With this exploration, we also intent to grasp their difficulties and needs, thus look for policy tasks for them. The analysis is based on qualitative case study. The results are following. Typical working high school graduate youths choose not to go on to university under the influence of unfavorable economic situation of the original families. They enter the labor market without enough career exploration and try to continue working mainly in low-income and unskilled jobs. They usually work long hours to increase incomes, thus, do not have enough time to invest on their own human resources. They locate in a vicious circle of income poverty, time poverty, and skill poverty, but rarely protected by existing employment and income support programs. It is necessary to improve or introduces policy packages including labor market transition support for the high school graduate, education, training, and career exploration support, income support for the working poor, social network support, and support for reducing the dead zone of social insurances.

• Korean Journal of Environment and Ecology
• /
• v.33 no.1
• /
• pp.52-63
• /
• 2019

This study analyzed the characteristics of vegetation structure of the camphor tree (Cinnamomum japonicum) community in the area of mount Tachibana, Kasuya county, Fukuoka Prefecture designated as a special natural monument in Japan. The survey showed overwhelming dominance of canopy tree in the canopy layer (about 30 m in tree heights and 92.79 cm in average breast height diameter) but no appearance in the understory layer or the shrub layer. In the understory layer and the shrub layer, Castanopsis sieboldii, Machilus thunbergii, Neolitsea sericea, and Cinnamomum yabunikkei, which were the competing species to the canopy layer and the late-successional species in the warm temperate climate zone, were mainly distributed. Moreover, the species diversity was generally low, indicating the vegetation characteristics that was not typical of evergreen broad-leaved forests. This is presumably because camphor trees were actively planted, protected, and cultivated to produce camphor which was valuable in the past. Although this site has not been artificially managed for the past 90 years as the raw materials of camphor have not been collected, vegetation transition did not proceed, which is unique. It is probably due to the fact that camphor was overwhelmingly dominant in the canopy layer so that the inflows of species were restricted, and young tree germination did not occur due to the allelopathy effects of camphor trees.