• 대한토목학회논문집
• /
• 제7권3호
• /
• pp.229-240
• /
• 1987

콘크리트의 중성화(中性化)는 일종의 화학적(化學的) 반응(反應)이며, 더우기 혼화재(混和材)로서 플라이애쉬와 고로수쇄(高爐水碎)슬래그를 혼화(混和)한 경우에는 그 반응(反應)매카니즘이 매우 복잡하다. 최근에는 콘크리트의 성능(性能)을 개선(改善)시킬 목적으로 시멘트의 일부를 산업부산물(産業副産物)인 플라이애쉬 및 고로수쇄(高爐水碎)슬래그로 혼화(混和)함으로서 이들에 의한 포졸란반응(反應) 및 잠재수경성(潛在水硬性)에 의해 콘크리트의 중성화(中性化)가 촉진되어 콘크리트 속의 철근이 발창(發錆)될 우려가 있다고 하는 지적이 계속되어 왔다. 본(本) 연구(硏究)에서는 이상과 같은 관점(觀點)으로부터 포졸란반응(反應) 및 잠재수경성(潛在水硬性)이 콘크리트의 중성화(中性化)에 미치는 영향을 분명히 하기 위하여 콘크리트의 배합조건(配合條件)및 수중양생기간(水中養生期間) 등을 변화시켜 자연환경조건(自然環境條件)과 다른 가혹(苛酷) 환경조건하(環境條件下)에서 촉진중성화실험(促進中性化實驗)을 실시하였다. 또한 이들의 결과를 중성화(中性化)의 조기판정(早期判定)이라는 점에 중시(重視)하여 자연환경하(自然環境下)에서 15년간(年間) 옥내(屋內)에 폭로(曝露)시킨 필자(筆者)들의 연구결과(硏究結果)와도 비교(比較) 검토(檢討)를 하여 압축강도(壓縮强度)에 바탕을 둔 새로운 중성화(中性化) 속도식(速度式)을 제안(提案)하였다.

• 콘크리트학회논문집
• /
• 제16권4호
• /
• pp.451-458
• /
• 2004

본 연구는 재래 철근과 Fiber Reinforced Polymer 보강재를 사용한 Hybrid Reinforcement System의 기본 개념과 적용성에 대해 기술하고 있다. 콘크리트 교량상관은 보로서 지지되고 상하 두층의 보강재로 인장보강되어 있다. HRS를 이용한 콘크리트 교량상판에서는 보 지지점 부근의 부모멘트에 대한 상부 인장력은 FRP 봉으로 저항하고 보 지지점 중앙부근의 하부인장력은 재래의 철근으로 저항한다. HRS를 이용한 콘크리트 교량상판은 FRP 봉은 비 부식성이고, 부식되기 쉬운 철근은 교량상판 위로부터 가급적 멀리하여 부식물질의 침투를 막을 수 있는 장점이 있다. HRS를 이용한 콘크리트 교량상판은 또한 극한상태에서 충분한 연성을 가지고 있다. 그 이유는 1) FRP봉은 철근보다 탄성계수가 낮고 파단시의 최대 변형률이 크며, 2) 충분한 FRP 보강량을 사용하면 극한변형률을 낮출 수 있으며, 3) 부모멘트 구간의 일부를 비부착시켜 극한 변형률을 낮출 수 있다. 실험 연구 결과 보통의 FRP보강비의 범위에서는 FRP 및 HRS 콘크리트 슬래브는 FRP봉의 파단이 아니라 콘크리트의 압축에 의해 파피됨을 보여주고 있다. 그러므로 HRS를 이용한 연속 콘크리트 교량상관에서는 정모멘트부의 하부철근이 먼저 항복하여 소성힌지를 형성하고 나중에 부보멘트나 정모멘트부의 콘크리트가 압축파괴되어 FRP 콘크리트 슬래브에 비하여 상당한 소성에너지를 소모한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권3호
• /
• pp.33-41
• /
• 2016

콘크리트는 내화재료로서 우수한 성능을 발휘하지만 화재가 지속됨에 따른 재료특성 변화 또는 성능저하의 위험을 갖는다. 이 연구는 실물모형 철근 콘크리트 (RC) 보를 활용하여 비재하 화재 실험을 수행하여 화재노출 전후의 콘크리트 및 보강철근의 재료특성을 실험적으로 분석한 연구이다. 화재실험에 사용된 보는 길이 4 m의 RC 보로서 KS F 2257 화재실험 규격에 따라 시험 체를 제작 및 화재실험을 수행하였다. 화원의 가력은 ISO 834의 표준화재 곡선을 사용하였으며 보 가열부에서의 온도를 계측하고자 하면 및 측면에 열전대를 설치하였다. 실험결과, 화재에 노출된 화재 코어 공시체의 경우 약 11 MPa로 약 66%의 강도저하가 발생하였다. 화재에 직접 노출된 철근의 경우 노출되지 않은 철근에 비해 약 17%에 해당하는 75 MPa의 항복강도 저하를 나타낸 것으로 분석되었다. 철근의 경우 콘크리트라는 내화피복에 의하여 보호되어 약 4시간의 화재 실험에서도 온도는 한계온도의 최댓값인 $649^{\circ}C$를 크게 상회하지 않는 것으로 나타났다.

• 농업과학연구
• /
• 제41권4호
• /
• pp.473-480
• /
• 2014

Upon setting up a dedicated plastic greenhouse for tomato cultivation developed by the Rural Development Administration on the Gyehwa reclaimed land, this study was aimed at analyzing the problems can be occurred in the installation of plastic greenhouse on reclaimed lands as well as finding out solutions for improvement. A relatively cheaper wooden pile was used in the installation in order to supplement the soft ground conditions. Based on the results of ground investigation of the installation site, both the allowable bearing capacity and pulling resistance of the wooden pile with a diameter of 150 mm and a length of 10 m were computed and came out to be 30.645 kN. It was determined that the values were enough to withstand the maximum compressive force (17.206 kN) and the pullout force (20.435 kN) that are generally applied to the greenhouse footing. There are three problems aroused in the process of greenhouse installation, and the corresponding countermeasures are as follow. First, due to the slightly bent shape of the wooden pile, there were phenomenon such as deviation, torsion, and fracture when driving the pile. This could be prevented by the use of the backhoe (0.2) rotating tongs, which are holding the pile, to drive the pile while pushing to the direction of the driving and fixing it until 5 m below ground and applying a soft vibrating pressure until the first 2 m. Second, there exists a concrete independent footing between the column of the greenhouse and the wooden pile driven to the underground water level. Since it is difficult to accurately drive the pile on this independent footing, the problem of footing baseplate used to fix the column being off the independent footing was occurred. In order to handle with this matter, the diameter of the independent footing was changed from 200 mm to 300 mm. Last, after films were covered in the condition that the reinforcing frame and bracing are not installed, there was a phenomenon of columns being pushed away by the strong wind to the maximum of $11m{\cdot}s^{-1}$. It is encouraged to avoid constructions in winter, and the film covering jobs always to be done after the frame construction is completely over. The height of the independent footing was measured for 9 months after the completion of the greenhouse installation, and it was found to be within the margin of error meaning that there was no subsidence. The extent to the framework distortion and the value of inclinometers as well showed not much alteration. In other words, the wooden pile was designed to have a sufficient bearing capacity.

• Nuclear Engineering and Technology
• /
• 제44권5호
• /
• pp.523-534
• /
• 2012

The objective of this study was to experimentally investigate the effect of heat curing methods on the temperature history and strength development of slab concrete exposed to $-10^{\circ}C$. The goal was to determine proper heat curing methods for the protection of nuclear power plant structures against early-age frost damage under adverse (cold) conditions. Two types of methods were studied: heat insulation alone and in combination with a heating cable. For heat curing with heat insulation alone, either sawdust or a double layer bubble sheet (2-BS) was applied. For curing with a combination of heat insulation and a heating cable, an embedded heating cable was used with either a sawdust cover, a 2-BS cover, or a quadruple layer bubble sheet (4-BS) cover. Seven different slab specimens with dimensions of $1200{\times}600{\times}200$ mm and a design strength of 27 MPa were fabricated and cured at $-10^{\circ}C$ for 7 d. The application of sawdust and 2-BS allowed the concrete temperature to fall below $0^{\circ}C$ within 40 h after exposure to $-10^{\circ}C$, and then, the temperature dropped to $-10^{\circ}C$ and remained there for 7 d owing to insufficient thermal resistance. However, the combination of a heating cable plus sawdust or 2-BS maintained the concrete temperature around $5^{\circ}C$ for 7 d. Moreover, the combination of the heating cable and 4-BS maintained the concrete temperature around $10^{\circ}C$ for 7 d. This was due to the continuous heat supply from the heating cable and the prevention of heat loss by the 4-BS. For maturity development, which is an index of early-age frost damage, the application of heat insulation materials alone did not allow the concrete to meet the minimum maturity required to protect against early-age frost damage after 7 d, owing to poor thermal resistance. However, the combination of the heating cable and the heat insulating materials allowed the concrete to attain the minimum maturity level after just 3 d. In the case of strength development, the heat insulation materials alone were insufficient to achieve the minimum 7-d strength required to prevent early-age frost damage. However, the combination of a heating cable and heat insulating materials met both the minimum 7-d strength and the 28-d design strength owing to the heat supply and thermal resistance. Therefore, it is believed that by combining a heating cable and 4-BS, concrete exposed to $-10^{\circ}C$ can be effectively protected from early-age frost damage and can attain the required 28-d compressive strength.

• 한국안전학회지
• /
• 제32권1호
• /
• pp.66-74
• /
• 2017

Masonry walls which are commonly used for partitions in low-rise reinforced concrete (RC) structures, can be easily exposed to high risks under strong earthquakes. Since the strength degradations cannot be protected under the ground motions, their applications cannot be recommended for building structures which are designed to possess high seismic performances. However, masonry-infilled walls are typically considered as non-structural elements in evaluating the seismic performance of building structures. In order to figure out this problem, this study performed experiments using two specimens-only RC frame and RC frame infilled with masonry walls- under static loading. Also, the study established analytical models representing fully infilled frames and bare frame, and compared their structural behavior with test results. In addition, analytical model representing partially infilled frames was established and analyzed. Test results indicated that strength and energy dissipating capacity were increased for IW-RN(fully infilled frames) compared to the NW(bare frame). The nonlinear static analysis of the three specimens was also conducted using the inelastic plastic hinge frame element and diagonal strut models, and the analytical results successfully simulated the nonlinear behaviour of the specimens in accordance with the test results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.37-40
• /
• 2005

High Performance Concrete(HPC) has been widely used in high-rise building. The HPC has several benefits including high strength, high fluidity and high durability. However. spatting is susceptible to occur in HPC and HPC also tends to be deteriorated in the side of fire resistance performance at fire. This paper focuses on the analysis of the temperature history and residual compressive strength with finishing material, in order to protect HPC from sudden-high-temperature, which is one of the main reason spatting occurs. Test results show that spalling occurs in all specimens. The most serious spalling took placed in HPC covering fire enduring spray-on material, whose covering thickness is 20mm but temperature history indicates that fire enduring spray effectively protected HPC from fire for more than 2hours. In addition, residual compressive strength ratio of HPC using fire enduring paint was more than $90\%$ of original strength, thus minimizing spatting and indicating significant fire resistance performance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.878-884
• /
• 2006

Grounding fault and short of the DC power supply systems are detected and protected by high-speed circuit breaker, linked breaking device, ground relay and fault selective device, all of which are installed and operated in substaions. however, there have been many cases in which the protective devices did not detect grounding of of the over head catenary systems on concrete support for an extended period of time. Such cases often cause severe damages to the supports with high grounding resistances. If grounding accidents occur repetitively, the earth current and the rise of earth potential can damage not only passenger and staff but also electric facilities and equipment, necessitating high cost and endeavor to restore. The following study points out various problems that can be occurred occur as a result of high impedance grounding accident, and proposes a new system which can protect and intercept them.

• 국제초고층학회논문집
• /
• 제10권3호
• /
• pp.211-218
• /
• 2021

A new type of earthquake resilient reinforced concrete (RC) shear wall structure, installed with replaceable coupling beams and replaceable corner components at the bottom of wall piers, is proposed in this study. At first, the mechanical behavior of replaceable components, such as combined dampers and replaceable corner component, is studied by cyclic loading tests on them. Then, cycling loading tests are conducted on one conventional coupled shear wall and one new type of coupled shear wall with replaceable components. The test results indicate that the damage of the new type of coupled shear wall concentrates on replaceable components and the left parts are well protected. Finally, a case study is introduced. The responses of one conventional frame-tube structure and one new type of structure installed with replaceable components under the wind and the earthquake are compared, which verify that the performance of new type of structure is much better than the conventional structure.

• Earthquakes and Structures
• /
• 제22권2호
• /
• pp.137-145
• /
• 2022

As steel is highly sensitive to temperature variations, fire exposure is more destructive in the case of steel structures in comparison to the concrete ones. The performance of an intermediate three-story steel moment frame with 4 spans was studied under the service load, thermal load and post-earthquake fire in this paper. Also, the effects of passive fire-protection materials such as ordinary cement-based and fire-retardant coatings were investigated. To model and analyze the structure; Abaqus software is utilized. In order to apply the earthquake effect, the push-over analysis method is employed. Changes in the stories deflection, endurance time and growth of nonlinear regions due to losses in the steel stiffness and strength, are among the issues considered in this study. As an interesting finding, the beams protected by ordinary cement-based coating could sustain the fire exposure at least for 30 minutes in all cases. The mentioned time is increased by employing a new fire-retardant protection, which could prevent significant loss in the structure resistance against fire, even after 60 minutes of exposure to fire.