• Physical Therapy Korea
• /
• v.12 no.1
• /
• pp.22-27
• /
• 2005

The purpose of this study was to investigate the effects of visual information and different elevations of medially wedged insoles on the proprioceptive sense of the knee joint. The subjects of this study were 16 able-bodied men who were not athletic. An electrogoniometer was used to determine the error value between calculated 50% of full flexion (target position) and performed 50% of full flexion in a standing position with the upper extremities crossed. Tests were randomly performed in $2{\times}4$ conditions. Visual variations included open eyes vs. closed eyes, while the elevation was adjusted through the use (or lack thereof) of medially wedged insoles of 10 mm, 14 mm, and 18 mm. The average error value in each condition was statistically analyzed. The findings of this study revealed as follows: 1) The average error value was significantly higher with the subjects' eyes open than with their eyes closed (p<.05). 2) The averaged error value was also significantly higher when the subjects were elevated 18 mm than with no elevation at all (p<.05). The findings of this study should be considered in lower extremity rehabilitation programs when medially wedged insoles used.

• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1405-1412
• /
• 2018

Korean-PEQ (prosthesis evaluation questionnaire) was developed and verified its validity research but, evaluating its reliability applied to the lower extremity amputees have not been conducted. The aim of this study was to apply the Korean-PEQ for lower extremity amputees to evaluate the reliability. As a result, all of the items responding of Korean-PEQ shown to less than 15% ceiling effect and floor effect. therefore, the results were shown to be appropriate. Korean-PEQ reliability of each region of intra-class coefficient was shown to .719(95% CI .600~.811)~920(95%CI .890~.945) and the inter-region reliability was higher as 0.958. Item internal consistency Cronbach's ${\alpha}$ values are shown as higher .910.

• Physical Therapy Korea
• /
• v.8 no.2
• /
• pp.17-27
• /
• 2001

The purpose of this study was to investigate the effect of donning of a hard insole in patients with hallux valgus. Fourteen subjects were selected from patient with foot pain at Lee Chang-Heon Foot Clinic from August 4, 2000 to September 15, 2000. The hallux valgus angle and the first-second intermetatarsal angle were radiographically measured before and after donning the hard insole. Based on these two kinds of angles, a mild hallux valgus deformity group was characterized by the hallux valgus angle of less than 20 degrees, and a moderate hallux valgus deformity group was characterized by the hallux valgus angle of 20 to 40 degrees. After three weeks with the hard insole donned, the foot angles of the patients with hallux valgus were measured again. The data were analyzed by Wilcoxon signed ranks test, and the following results were obtained: 1) After the trial, both mild hallux valgus deformity group and moderate hallux valgus deformity group demonstrated that the hallux valgus angles were significantly decreased. 2) After the trial, mild hallux valgus deformity group demonstrated that the first-second intermetatarsal angle was significantly decreased. 3) After the trial, moderate hallux valgus deformity group demonstrated that the first-second intermetatarsal angle was not significantly decreased. The above findings revealed that according to donning hard insole, the hallux valgus angles of mild and moderate hallux valgus deformity groups and the first-second intermetatarsal angle of mild hallux valgus deformity group were significantly decreased. The results of this study have some limitation for generalization due to the limited number of subjects. Further studies are needed to evaluate the effect of hard insole on hallux valgus with more precise laboratory equipments and measurements in patients with hallux valgus.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.5
• /
• pp.444-450
• /
• 2007

In general, labiolingual or buccolingual widths of residual alveolar bone are insufficient in edentulous area, because of alveolar resorption. Horizontal augmentation is bone graft procedure with a view to reinforcing horizontally insufficient bone quantity for installation of implants. The standard method is taking appropriate amount of block bone from intraoral or extraoral autogenous bone, and solid fixation with screws or mini-plate on labial or buccal side of residual alveolar bone. The purpose of this study is to discuss clinical usefulness of horizontal augmentation with autogenous block bone by observation and analysis of course of 41 implants installed to 12 patients by horizontal augmentation in Seoul National University Bundang Hospital from July, 2002 to December, 2005. The mean age of patients is 52.7, from 19 to 70, and the number of men and women is each 2 and 10. Block bone was taken from symphysis, body, ramus of mandible or iliac bone. And 6 types of implants were installed simultaneously or not, the diameters of implants are from 3.3 to 5.5mm, the lengths are from 8 to 15mm. The operator added artificial bone grafting material and optionally covered with membrane. The mean periods of observation after operation and final prosthetics were 28.6 and 17.0 months. As a result, 40 among 41 implants survived, the survival rate was 97.6%. Average 0.9mm crestal resorption was observed at final point of time by periapical view of each patients. Major complication related to the procedure was numbness in 7 patients.

• Journal of dental hygiene science
• /
• v.20 no.1
• /
• pp.34-43
• /
• 2020

Background: The number and curriculum of dental hygienists in Korea have dramatically increased. Controversies have since resulted from insufficient job descriptions of the work performed by a dental hygienist. A dentist's perception was examined to legally reflect the actual work of dental hygienists. Methods: Four hundred and nineteen dentists were surveyed about the duties of a dental hygienist. Their views on the career and availability of each job were examined. The duties of the dental hygienist include 13 items in dental treatment preparation, 14 items of radiography, 21 items of preventive dentistry, 6 items of periodontal treatment, 12 items of oral medicine, 12 items of conservative dentistry, 8 items of prosthetics, 10 items of orthodontics, 7 items of oral and maxillofacial surgery, 6 items of implantation, 6 items of impression taking and model fabrication, 5 items of anesthesia and injection, 11 items of management and administrative, and 3 items of self-development. Results: Most of the duties were doable by a dental hygienist. Many dentists reported that managing implants, oral hygiene of special patients, some duties in oral medicine, teeth brightening, making temporary crowns, making individual trays, selecting shades, ligaturing, and precision impressions need ≥3 years of experience. Duties perceived by dentists not to be performed by dental hygienists were reading radiographs (55.4%), suture and stitch out (48.0%), intramuscular injection (36.0%), root planning (27.2%), cementation and removal of prostheses (23.2%), and examining pulp vitality (22.0%). Conclusion: Current laws are to be revised to include, the care provided by dental hygienists and under a physician's supervision. Flexibility is also needed to cope with rapidly changing dental technology.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.4
• /
• pp.204-209
• /
• 2012

PURPOSE. The aim of this systematic review is to address treatment outcomes of Mandibular implant overdentures relative to implant survival rate, maintenance and complications, and patient satisfaction. MATERIALS AND METHODS. A systematic literature search was conducted by a PubMed search strategy and hand-searching of relevant journals from included studies. Randomized Clinical Trials (RCT) and comparative clinical trial studies on mandibular implant overdentures until August, 2010 were selected. Eleven studies from 1098 studies were finally selected and data were analyzed relative to number of implants. RESULTS. Six studies presented the data of the implant survival rate which ranged from 95% to 100% for 2 and 4 implant group and from 81.8% to 96.1% for 1 and 2 implant group. One study, which statistically compared implant survival rate showed no significant differences relative to the number of implants. The most common type of prosthetic maintenance and complications were replacement or reattaching of loose clips for 2 and 4 implant group, and denture repair due to the fracture around an implant for 1 and 2 implant groups. Most studies showed no significant differences in the rate of prosthetic maintenance and complication, and patient satisfaction regardless the number of implants. CONCLUSION. The implant survival rate of mandibular overdentures is high regardless of the number of implants. Denture maintenance is likely not inflenced substantially by the number of implants and patient satisfaction is typically high again regardless os the number of implants.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.4
• /
• pp.197-203
• /
• 2012

PURPOSE. The aim of this systematic review was to address treatment outcome according to attachment systems for mandibular implant overdentures in terms of implant survival rate, prosthetic maintenance and complications, and patient satisfaction. MATERIALS AND METHODS. A systematic literature search was conducted using PubMed and hand searching of relevant journals considering inclusion and exclusion criteria. Clinical trial studies on mandibular implant overdentures until August, 2010 were selected if more than one type of overdenture attachment was reported. Twenty four studies from 1098 studies were finally included and the data on implant survival rate, prosthetic maintenance and complications, patient satisfaction were analyzed relative to attachment systems. RESULTS. Four studies presented implant survival rates (95.8 - 97.5% for bar, 96.2 - 100% for ball, 91.7% for magnet) according to attachment system. Ten other studies presented an implant survival rate ranging from 93.3% to 100% without respect to the attachment groups. Common prosthetic maintenance and complications were replacement of an assay for magnet attachments, and activation of a matrix or clip for ball or bar attachments. Prosthetic maintenance and complications most commonly occurred in the magnet groups. Conflicting findings were found on the rate of prosthetic maintenance and complications comparing ball and bar attachments. Most studies showed no significant differences in patient satisfaction depending upon attachment systems. CONCLUSION. The implant survival rate of mandibular overdentures seemed to be high regardless attachment systems. The prosthetic maintenance and complications may be influenced by attachment systems. However patient satisfaction may be independent of the attachment system.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.123-132
• /
• 2000

The field of maxillofacial prosthetics is concerned with the prosthetic reconstruction of missing head and neck tissue. Currently, facial prostheses are usually applied in cases of defects caused by the surgical removal of tumors or congenital defects. While silicone has been most widely used for the reconstruction of missing maxillofacial defects, it does not have ideal physical properties. Therefore, bonding a thin polyurethane sheet to silicone prostheses was recommended. In this case skin adhesives were used for the retention of maxillofacial prostheses. But retention of devices has always been problematic. The contributions of implants can be made to solve these problems. Implants have reduced the need for adhesive use, simplifying cleaning procedures and thus extending the life of the prostheses. For implant-retained prostheses, retentive matrix is necessary to hold attachments and/or magnets. The retentive matrix is usually fabricated with autopolymerizing acrylic resin or visible light- polymerized resin. The purpose of this study was to compare the adhesion-in-peel force of silicone adhesive to autopolymerizing acrylic resin and polyurethane sheet with two different surface textures : pumice polish only or retention groove, and three surface primers : Dow corning 1205 primer or Dow corning S-2260 primer or FactorII A-304 primer, and two polymerization methods : room temperature or dry heat oven. The t-peel bond strength of specimens was determined as described in ASTM Standard D1876-72. The results were statistically analyzed using the ANOVA test, multiple range test and t-test The results were as follows. 1. The t-peel bond strength of A-304 primer was the highest and statistically higher than that of S-2260(p<0.05). 2. The t-peel bond strength of specimens with retention groove was statistically higher than that of specimens polished with pumice(p<0.05). 3. The t-peel bond strength of specimens polymerized in dry heat oven was statistically higher than that of specimens in room temperature(p<0.01).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.2
• /
• pp.126-133
• /
• 2015

Periodontal tissue destroyed by inflammation is difficult to achieve regeneration of the tissue and esthetic restorations only by surgical methods. In particular, improvement of esthetics is more difficult if the problem is related to the implant. A 23 year old woman suffered from unesthetic anterior implant prosthesis. According to her dental history, a repeated bone graft and soft tissue graft failed at a local dental clinic. It was needed to resolve the inflammation and to improve the esthetics. A free gingival graft and ridge augmentation accompanied by guided bone regeneration and a vascularized interpositional periosteal connective tissue graft was performed. Instead of implant prosthesis, a conventional fixed bridge was adopted for better esthetic result. The patient was satisfied with the esthetic conventional fixed prosthesis. This case report introduces esthetic rehabilitation of unesthetic implant prosthetics in the maxillary anterior dentition by a combination of surgical and prosthetic approaches.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.4
• /
• pp.869-873
• /
• 2007

Methanol extracts of Acorus gramineus Solander(AGS) were found to exhibit immuno-regulatory action in BALB/c mice. Oral administration of AGS increased murine splenic T lymphocytes, especially $T_H$ and $T_C/T_S$ subpopulations were increased significantly. Treatment of AGS exerted strong cytotoxicity against U937 and HL60 human leukemia cells. Also, AGS induced apoptosis of U937 leukemia cells in a dose dependent manner. Nitric oxide(NO) production and iNOS gene expression were also increased in AGS-treated RAW264.7 cells. Treatment of AGS increased the expression of p53 gene and decreased the expression of PCNA protein in cultured U937 cells. These data suggest that AGS are effective on the immuno-regulatory action and anti-cancer properties.