• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.180-180
• /
• 2006

A novel preparation method for core/shell nanoparticles with protein drug-loaded lipid core was designed and characterized. The lipid core is composed of lecithin and protein drug and the polymeric shell is composed of Pluronics (poly (ethylene oxide)-poly (propylene oxide)-poly(ethylene oxide) triblock copolymer, F-127 For the application of core/shell nanoparticles as a protein drug carrier, lysozyme and Vascular Endothelial Growth Factor (VEGF) were loaded into the core/shell nanoparticles by electrostatic interaction and the drug release pattern was observed by manipulating the polymeric shell.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.8
• /
• pp.1171-1174
• /
• 2006

Various off-the-shelf Lewis acids in conjunction with various onium salts are screened for coupling reaction of $CO_2$ with epoxides. Among the tested ones, $VCl_3/n-Bu_4NOAc$, $VCl_3/(n-Bu_4NCl$ or PPNCl), $FeCl_3/ n-Bu_4NOAc$, and $FeCl_3/ n-Bu_4NOAc$are proved to be highly active. Propylene oxide, epichlorohydrin, styrene oxide, and cyclohexene oxide can be converted over 90% yields to the corresponding cyclic carbonates without the use of organic solvents under mild conditions by 0.1-1.0 mol% catalyst charge.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.157-157
• /
• 1999

Electrochromic tungsten oxide films were prepared by the electron beam deposition, and the dependence of the electrochemical stability and the optical properties on the titanium concentration, and on the annealing temperature, that was investigated. coloring and bleaching experiments were repeated by cyclic voltammetry in a propylene carbonate solution of LiClO4. Spectrometry was used to assess the stability of the transmittance in the degraded films. Tungsten oxide films with titanium contents of about 10~15 mol% were found to be most stable, undergoing the least degradation during the repeated for coloring and bleaching cycles. The reason for this small amount of degradation was the reduction of lithium ion trapping sites in the films, which results in an increased durability. Tungsten oxide films with titanium contents of about 20 mol% were annealed at 20$0^{\circ}C$ for 1 hour, and this results showed that durability of films were increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.3
• /
• pp.265-265
• /
• 1998

The phase behavior of chlorinated hydrocarbon/mixed surfactants/water microemulsion systems were investigated for dry cleaning solvent properties. With appropriate surfactant mixtures, Winsor type I-III-II microemulsions were generated which is the same as hydrocarbon systems. For perchloroethylene(PCE) with mixed Tween systems, the optimum salinity(S*) decreases and the optimum solubilization parameter(o*) increases with decreas- ing HLB. For PCE with mixed Aerosol MA and ethoxylated alcohol systems, S* and o* both increase with increasing ethylene oxide moles. For dichlorobenzene(DCB) with mixed Aerosol MA and ethoxylated or propoxylated sulfate systems, S* and o* both increase with increasing ethylene oxide moles or propylene oxide moles.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.3
• /
• pp.365-373
• /
• 1998

The phase behavior of chlorinated hydrocarbon/mixed surfactants/water microemulsion systems were investigated for dry cleaning solvent properties. With appropriate surfactant mixtures, Winsor type I-III-II microemulsions were generated which is the same as hydrocarbon systems. For perchloroethylene(PCE) with mixed Tween systems, the optimum salinity(S*) decreases and the optimum solubilization parameter(o*) increases with decreas- ing HLB. For PCE with mixed Aerosol MA and ethoxylated alcohol systems, S* and o* both increase with increasing ethylene oxide moles. For dichlorobenzene(DCB) with mixed Aerosol MA and ethoxylated or propoxylated sulfate systems, S* and o* both increase with increasing ethylene oxide moles or propylene oxide moles.

• Macromolecular Research
• /
• v.13 no.6
• /
• pp.499-505
• /
• 2005

Ordered mesoporous materials with a hydrothermally-stable, protozeolitic framework were prepared by exploring the direct conversion of inorganic species based on co-surfactant templating systems. To confer hydrothermal stability on the mesoporous aterials, the organic-inorganic hybrids were heat-treated in strongly basic media. Co-surfactant templating systems of cetyltrimethylammonium bromide [$C_{16}H_{13}(CH_{3})_{3}$NBr, CTAB] with 1,3,5-trim­ethylbenzene (TMB) or a nonionic block copolymer of poly(ethylene oxide )-b-poly(propylene oxide )-b-poly(ethyl­ene oxide) ($EO_{20}PO_{70}EO_{20}$) were employed to improve the hydrothermal stability of the organic-inorganic self-assembly during the solid rearrangement process of the inorganic species. The mesoscopic ordering of the pore structure and geometry was identified by X-ray diffraction, small angle neutron scattering and electron microscopy.

• Macromolecular Research
• /
• v.16 no.1
• /
• pp.62-65
• /
• 2008

The morphology of the $D_2O$-induced reverse micellar structure of an amphiphilic block copolymer of poly( ethylene oxide )-b-poly(propylene oxide )-b-poly( ethylene oxide )($EO_{76}PO_{29}EO_{76}$) was investigated in hydrophobic media by small angle neutron scattering (SANS). Increasing $D_2O$ in the styrene/divinylbenzene solution of $EO_{76}PO_{29}EO_{76}$ led to a change in morphology of the reverse micelles from a short range ordered molecular aggregate to a hexagonally arranged micelle, and further to a spherical micelle.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.395-399
• /
• 2011

Material of the gasket for lithium ion battery requires the chemical resistance, the electrical insulting property, the compression set, the anti-contamination level and the low temperature resistance. We compounded ethylene propylene diene monomer (EPDM), which showed widely different solubility parameter index, with adjusting the amount of metal oxide as an activator. We did long-term test and compression set against an electrolyte with consideration for operating conditions in lithium-ion battery. In these tests, we checked the physical, chemical characteristics and the effect to lithium ion battery with different kinds of activators. In case of rubber with ZnO as an activator, through 1000 h depositing test in propylene carbonate which is one of representative solvents, we could get the satisfying characteristics and result. However, $Zn^{2+}$ had eluted in the ion elution test. So, ZnO should be limited in EPDM compound for the gasket material in lithium-ion battery.

• Korean Journal of Food Science and Technology
• /
• v.38 no.3
• /
• pp.385-391
• /
• 2006

Physicochemical properties of hydroxypropylated waxy rice starches were investigated to reduce steeping-time of yukwa (Korean oil-puffed rice snack) processing. Swelling power of hydroxypropylated waxy rice starch increased at relatively higher temperature $(60^{\circ}C)$ than native waxy rice starch $(70^{\circ}C)$. Solubility of hydroxypropylated waxy rice starches increased with increasing propylene oxide content. Pasting temperature $(66.3-66.9^{\circ}C)$ and peak viscosity (216-232 RVU) of hydroxypropylated waxy rice starch were higher than those of native starch (179 RVU) and increased with increasing propylene oxide content. DSC thermal transitions of hydroxypropylated waxy rice starches shifted toward higher temperature. Amylopectin melting enthalpy of hydroxypropylated waxy rice starch (8.4-9.2 J/g) was similar to native starch (9.0 J/g). X-ray diffraction patterns of native and hydroxypropylated waxy rice starches showed typical A-type pattern with no significant differences between them, suggesting hydroxypropylation only affected amorphous region. Results suggest hydroxypropylated waxy rice starch is not applicable for yukwa due to low puffing efficiency and dark color.

• Clean Technology
• /
• v.14 no.1
• /
• pp.29-34
• /
• 2008

Copolymerizations of propylene oxide (PO) and phthalic anhydride (PA) have been performed in the presence of double metal cyanide (DMC) catalyst as a means of incorporating ester groups in the polyol backbone. DMC catalyst was effective for the copolymerization and the reactivity ratios measured by modified Kelen-$T{\ddot{u}}d{\ddot{o}}s$ equation were $r_1(PA)\;=\;0$, and $r^2(PO)\;=\;0.248$. Four different Polyol samples containing 1.0, 2.1, 7.52, and 11.42 mol% of PA unit were utilized for the synthesis of thermoplastic polyurethanes of their hard segments of 19 wt%. As the incorporated amount of PA increases, the elongation of the resulting polyurethane decreases and the tensile strength and the tensile modulus increase. The modulation of the incorporated amount of PA into polyol backbone was proven to be a feasible way to tune the physical properties of polyurethanes.