• 콘크리트학회지
• /
• 제5권4호
• /
• pp.145-155
• /
• 1993

본 연구는 섬유보강 플라이애쉬$\cdot$석회$\cdot$석고 복합체의 역학적 특성을 실험적으로 구명하고, 그 제조방법을 제시한 것이다. 플라이애쉬$\cdot$석회$\cdot$석고 복합체는 PAN계 및 Pitch계 탄소섬유, 내알카리성 유리섬유와 폴리머 분산제를 사용하여 제조하였고, 배합조건별로 그 특성을 검토하였다. 연구결과, 플라이애쉬$\cdot$석회$\cdot$석고 복합체의 제조를 위한 소요서의 컨시스턴시와 강도를 얻기 위한 최적배합을 제안하였다. 또한, 섬유보강 플라이애쉬 석회 석고 복합체의 휨강도 및 휨인성은 섬유의 종류에 관계없이 섬유혼입율의 증대에 따라 현저히 개선되었으며, 압축강고는 섬유혼입율보다는 점유의 종류에 따라 크게 영향을 받았다. 한편, 폴리머 분산제를 혼입한 PAN계 탄소섬유보강 플라이애쉬$\cdot$석회$\cdot$석고 복합체의 비중은 폴리머 분산제의 혼입에 의해 크게 감소하였고, 동복합체의 압축강도, 휨강도 및 휨인성은 폴리머에 의한 영향은 거의 없고 섬유혼입율은 증대에 따라 현저히 개선되는 것으로 나타났다.

• International Journal of Concrete Structures and Materials
• /
• 제3권1호
• /
• pp.3-9
• /
• 2009

This paper examines the incorporation of the crushed sand (CS) and desert sand (DS) in the formation of self compacting concrete (SCC). These sands have been substituted for the rolled sand (RS), which is currently the only sand used in concretes and which is likely to run out in our country. DS, which comes from the Tunisian Sahara in the south, is characterized by a tight distribution of grains size. CS, a by-product of careers containing a significant amount of fines up to 15%, is characterized by a spread out granulometry having a maximum diameter of around 5mm. These two sands are considered as aggregates for the SCC. This first part of the study consists in analyzing the influence of the type of sand on the parameters of composition of the SCC. These sands consist of several combinations of 3 sands (DS, CS and RS). The method of formulation of the adopted SCC is based on the filling of the granular void by the paste. The CS substitution to the RS made it possible, for all the proportions, to decrease the granular voids, to increase the compactness of the mixture and to decrease the water and adding fillers proportioning. These results were also obtained for a moderate substitution of DS/CS (< 40%) and a weak ratio of DS/RS (20%). For higher proportions, the addition of DS to CS or RS did not improve the physical characteristics of the SCC granular mixture.

• 한국건설순환자원학회논문집
• /
• 제6권3호
• /
• pp.182-189
• /
• 2018

본 연구에서는 공사 시 발생하는 현장 굴착토를 활용한 하수관용 유동화 뒤채움재의 실용화 기술개발의 일환으로서 현장 굴착토를 모사한 표준토 종류별에 따른 CLSM의 배합요인별 유동성, 재료분리 저항성, 조기강도 및 재굴착강도 등의 공학적 특성을 검토하였다. 연구결과 카올리나이트, 황토, 주문진사를 이용하여 국내 토질을 대표하는 SM, ML, CL, CH 등의 대표토질을 구현할 수 있는 재료간 혼합비율을 도출하였다. 또한 CLSM의 유동성 및 조기압축강도에 가장 큰 영향을 미치는 요인은 W/B 및 S/B인 것으로 분석되었으며, 표준토 종류별에 따라 소요 유동성 및 조기강도를 만족시키는 범위가 매우 상이한 것으로 나타났다. 또한 유동성 및 초기강도를 확보할 수 있는 W/B 및 S/B를 적용한 표준토 종류별 CLSM의 재료분리저항성 및 재굴착성 평가를 통해 도출된 배합비율에 대한 유효성을 확인할 수 있었으며, 이를 통해 표준토 종류별에 따른 CLSM의 적정 배합비율을 도출하였다.

• 한국의류산업학회지
• /
• 제12권4호
• /
• pp.487-493
• /
• 2010

The objectives of this study were to investigate the progress of obesity in women from childhood to adulthood and to analyze the characteristics of obese figures through comparing their body proportions to normal-weight people, to provide a basic reference for development of new size categories and improved pattern grading. Body measurement was made on 6,704 women age between 7-39 in Sizekorea 2004 database. The age range was divided into three groups: children(7-12), teenagers(13-18) and adults(19-39). The result of research into the characteristics of body proportions of obese figures and the classification of different figure groups of obese people are as follows: The ratio between width and circumference for each part of the body was investigated according to body weight which was grouped into three different weights of low, normal and obese body weights. And the result demonstrated that in all the ranges of age, the obese groups had the lowest ratio between width and circumference, having a thick body shape. And according to the result of comparing the ratio of the circumference of each body part divided by the waist circumference, the obese group also showed a low ratio, indicating that they have bigger waist circumference than any other body parts. By analyzing the ratio of circumference of body parts divided by waist circumference, three factors were identified as contributing to obesity. Using the factor loadings of the upper, distal and lower body obesity, a cluster analysis was carried out and three different categories of obesity were defined; abdominal obesity, distal obesity and proximal obesity.

• Advances in environmental research
• /
• 제1권1호
• /
• pp.83-96
• /
• 2012

The water sludge is generated from the treatment of water with alum. Disposing of sludge again to the streams raises the concentrations of aluminum oxides in water, which has been linked to Alzheimer's disease. The use of water treatment plant (WTP) sludge in manufacturing of constructional elements achieves both the economical and environmental benefits. Due to the similar mineralogical composition of clay and WTP sludge, this study investigated the complete substitution of brick clay by sludge incorporated with some of the agricultural and industrial wastes, such as rice husk ash (RHA) and silica fume (SF). Three different series of sludge to SF to RHA proportions by weight were tried, which were (25: 50: 25%), (50: 25: 25%), and (25: 25: 50%), respectively. Each brick series was fired at 900, 1000, 1100, and $1200^{\circ}C$. The physical and mechanical properties of the produced bricks were then determined and evaluated according to Egyptian Standard Specifications (E.S.S.) and compared to control clay-brick. From the obtained results, it was concluded that by operating at the temperature commonly practiced in the brick kiln, a mixture consists of 50% of sludge, 25% of SF, and 25% of RHA was the optimum materials proportions to produce brick from water sludge incorporated with SF and RHA. The produced bricks properties were obviously superior to the 100% clay control-brick and to those available in the Egyptian market.

• Computers and Concrete
• /
• 제13권6호
• /
• pp.739-748
• /
• 2014

In this article, by using experimental studies and artificial neural network has been tried to investigate the use of nano-silica as concrete admixture to reduce alkali-silica reaction. If there are reactive aggregates and alkali of cement with enough moisture in concrete, a gel will be formed. Then with high reactivity between alkali of cement and existence of silica in aggregates, this gel will expand by absorption of water, and causes expansive pressure and cracks be formed. At the time passes, this gel will reduce both durability and strength of the concrete. By reducing the size of silicate to nano, specific surface area of particles and number of atoms on the surface will be increased, which causes more pozzolanic activity of them. Nano-silica can react with calcium hydroxide ($Ca(OH)_2$) and produces C-S-H gel. In this study, accelerated mortar bar specimens according to ASTM C 1260 and ASTM C 1567, with different mix proportions were prepared using aggregates of Kerman, such as: none admixture and plasticizer, different proportions of nano-silica separately. By opening the moulds after 24 hour and curing in water at $80^{\circ}C$ for 24 hour, then curing in (1N NaOH) at $80^{\circ}C$ for 14 days, length expansion of mortar bars were measured and compared. It was noted that, the lowest length expansion of a specimens shows the best proportion of admixture based on alkali-silica reactivity. Then, prediction of alkali-silica reaction of concrete has been investigated by using artificial neural network. In this study the backpropagation network has been used and compared with different algorithms to train network. Finally, the best amount of nano silica for adding to mix proportion, also the best algorithm and number of neurons in hidden layer of artificial neural network have been offered.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.153-159
• /
• 2018

Accelerators are used to speed up the construction by accelerating the setting time which helps in early removal of formwork thus leading to faster construction rate. Admixtures are used in mortar and concrete during or after mixing to improve certain properties of material which cannot be achieved in conventional cement mortar and concrete. The various industrial by products make nuisance and are hazardous to ecosystem as well. These wastes can be used in the construction industries to reduce the consumption of cement/aggregates, cost; and save the energy and environment by utilising waste and eliminate their disposal problem as well. The effect of calcium nitrate and triethanolamine (TEA) as accelerators and marble powder (MP) as waste material on the various properties of cement paste and mortar has been studied in the present work. The replacement ratio of MP was 0-10% @ 2.5% by weight of cement. The addition of calcium nitrate was 0% and 1%; and variation of addition of TEA was 0-0.1@ 0.025% and 0.1-1.0@ 0.1% by weight of cement. On the basis of setting time, some mix proportions were selected and further investigated. Setting time and soundness of cement paste; compressive strength and microstructure of mortar mix of selected mix proportions were studied experimentally at 3, 7 and 28 days aging. Results showed that use of MP, calcium nitrate, TEA and their combination reduced setting time of cement paste for all the mixes. Addition of calcium nitrate increased the compressive strength at all curing ages while MP and TEA decreased the compressive strength. The mechanism of additives was discussed through scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) analysis of the specimens.

• 디지털융복합연구
• /
• 제13권5호
• /
• pp.309-316
• /
• 2015

선행된 연구에서 제안된 '게임캐릭터 패션스타일 유형'을 토대로 커스터마이징 시스템에 나타난 게임 캐릭터의 유형별 스타일링을 Creative Style, Attractive Style, Grotesque Style, Usual Style, Suit Style로 분류하여 분석하였다. 그 결과 첫째, 게임의 특성상 가상공간에서 이루어진다는 점에서 현실에서는 구현하기 힘든 창의이며 융합적인 디자인 표현이 다양한 형태로 나타났다. 둘째, 게이머와 동일시되는 게임 캐릭터의 특징과 일반적인 신체비율보다 과장된 8등신 이상이 주로 사용되는 RPG들을 중심으로 분석된 만큼 Creative Style과 Attractive Style의 빈도가 높게 조사되었다. 셋째, 대체적으로 캐릭터의 의상디자인과 컬러의 사용은 게이머의 요구나 세계관의 반영에 의해 선택되므로 공통적인 특징이 나타나는 반면, 헤어디자인과 컬러에서는 다양한 표현으로 대표성을 찾기 힘들었다. 본 연구결과는 게이머의 개성과 요구에 부합하는 패션아이템 개발 매뉴얼 및 관련연구를 위한 참고자료로써 가치가 있다고 사료된다.

• Journal of Periodontal and Implant Science
• /
• 제39권1호
• /
• pp.95-102
• /
• 2009

Purpose: The aim of this report is to investigate the efficacy of anorganic bovine bone xenograft(Bio-$Oss^{(R)}$) at maxillary sinus floor augmentation. Materials and methods: Two male patients who missed maxillary posterior teeth were included. They were performed maxillary sinus floor augmentation using anorganic bovine bone xenograft(Bio-$Oss^{(R)}$). After 10 or 13 months, the regenerated tissues were harvested using trephine drills with 2 or 4mm diameter and non-decalcified specimens were made. The specimens were examined histologically and histomorphometrically to investigate graft resorption and new bone formation. Results: Newly formed bone was in contact with Bio-$Oss^{(R)}$ particles directly without any gap between the bone and the particles. The proportions of newly formed bone were $23.4{\sim}25.3%$ in patient 1(Pt.1) and 28.8% in patient 2(Pt.2). And the proportions of remained Bio-$Oss^{(R)}$ were $29.7{\sim}30.2%$ in Pt.1 and 29.2% in Pt.2. The fixtures installed at augmented area showed good stability and the augmented bone height was maintained well. Conclusion: Anorganic bovine bone xenograft(Bio-$Oss^{(R)}$) has high osteoconductivity and helps new bone formation, so that it can be used in maxillary sinus floor augmentation.

• 폴리머
• /
• 제33권4호
• /
• pp.342-346
• /
• 2009

본 연구에서는 스티렌(styrene; St)과 부틸아크릴레이트(butyl acrylate; BA)를 단량체 비에 따라 합성 제조하고, 합성제조된 시멘트 혼화용 폴리머를 혼입한 폴리머 시멘트 모르타르의 물리적 성질과 내구성에 대한 특성을 보통 시멘트 모르타르와 기존에 생산되어 현장에 적용되고 있는 St/BA계 폴리머 시멘트 모르타르를 비교 분석하고자 하였다. 실험결과, St/BA의 단량체 비가 50:50, 60:40일 경우에는 시멘트 혼화용으로 사용하기에 가장 적합하였으며, 강도특성에서도 우수한 결과를 나타냈다. 또한, 방수성능과 염화물 이온에 대한 침투 저항성, 그리고 중성화 저항성도 St/BA의 단량체 비가 증가할수록, 폴리머 시멘트 비가 증가할수록 증진효과가 우수한 결과를 나타냈다. 따라서, 본 연구를 통해 합성제조된 St/BA 라텍스를 시멘트 모르타르에 혼입할 경우 우수한 성능개선 효과를 얻을 수 있었다.