• International Journal of Aeronautical and Space Sciences
• /
• 제12권3호
• /
• pp.252-259
• /
• 2011

This paper is focused on dynamic modeling and control system design as well as vision based collision avoidance for multi-rotor unmanned aerial vehicles (UAVs). Multi-rotor UAVs are defined as rotary-winged UAVs with multiple rotors. These multi-rotor UAVs can be utilized in various military situations such as surveillance and reconnaissance. They can also be used for obtaining visual information from steep terrains or disaster sites. In this paper, a quad-rotor model is introduced as well as its control system, which is designed based on a proportional-integral-derivative controller and vision-based collision avoidance control system. Additionally, in order for a UAV to navigate safely in areas such as buildings and offices with a number of obstacles, there must be a collision avoidance algorithm installed in the UAV's hardware, which should include the detection of obstacles, avoidance maneuvering, etc. In this paper, the optical flow method, one of the vision-based collision avoidance techniques, is introduced, and multi-rotor UAV's collision avoidance simulations are described in various virtual environments in order to demonstrate its avoidance performance.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2018년도 추계학술발표대회
• /
• pp.434-437
• /
• 2018

본 논문에서는 ROS (Robot Operating System)에 대해서 소개하고 ROS를 이용해 드론의 제어기와 필터를 구현해본다. 드론이 강인한 성능을 보이기 위해서는 기체의 상태에 대한 더 정확한 추정이 필요하다. 드론이 기체좌표계로 출력하는 각 축(x축, y축, z축)에 대한 선속도, 선가속도를 더 정확히 추정하기 위해 칼만 필터를 설계하며 칼만 필터를 통과한 상태 변수를 제어 입력으로 하는 PID(Proportional Integral Derivative) 제어기를 설계한다. 실험적인 부분에서는 제어기와 자율 주행 알고리즘을 접목시켜 드론이 자신의 상태를 추정하고 알고리즘을 순차적으로 진행하는 과정을 살펴본다. 마지막으로 알고리즘을 통해 드론의 임무 수행 여부를 살펴보고 정밀한 제어를 위한 추가적인 제어기 설계 방법과 연구 방향을 제시하고자 한다.

• 한국소음진동공학회논문집
• /
• 제25권10호
• /
• pp.707-713
• /
• 2015

This paper proposes experimental results for control performance deterioration of a piezoelectric actuator under high temperature conditions due to external heat environment. In this work, a heat environment from 30 ℃ to 190 ℃ is established by a heat chamber which is capable of high temperature of heat environment. Inside the heat chamber, an experimental apparatus consisting of the stack type of piezoelectric actuator, laser sensor, gap sensor and temperature sensor is established. After evaluating temperature dependent blocking force, displacement and time response of a piezoelectric actuator inside the heat chamber, tracking control performances are evaluated under various temperature conditions via proportional-integral-derivative(PID) feedback controller. The desired position trajectory has a sinusoidal wave form with a fixed frequency. Control performances are experimentally evaluated at both room temperature and high temperature and presented in time domain.

• Ocean Systems Engineering
• /
• 제10권4호
• /
• pp.373-397
• /
• 2020

Heave compensation is a vital part of various marine and offshore operations. It is used in various applications, including the transfer of cargo between two vessels in the open ocean, installation of topsides of an offshore structure, offshore drilling and for surveillance, reconnaissance and monitoring. These applications typically involve a load suspended from a hydraulically powered winch that is connected to a vessel that is undergoing dynamic motion in the ocean environment. The goal in these applications is to design a winch controller to keep the load at a regulated height by rejecting the net heave motion of the winch arising from ship motions at sea. In this study, we analyze and compare the performance of various control algorithms in stabilizing a suspended load while the vessel is subjected to changing sea conditions. The KCS container ship is chosen as the vessel undergoing dynamic motion in the ocean. The negative of the net heave motion at the winch is provided as a reference signal to track. Various control strategies like Proportional-Derivative (PD) Control, Model Predictive Control (MPC), Linear Quadratic Integral Control (LQI), and Sliding Mode Control (SMC) are implemented and tuned for effective heave compensation. The performance of the controllers is compared with respect to heave compensation, disturbance rejection and noise attenuation.

• 드라이브 ㆍ 컨트롤
• /
• 제21권3호
• /
• pp.28-35
• /
• 2024

This study compared performances of PID (Proportional Integral Derivative), SMC (Sliding Mode Control), and MPC (Model Predictive Control) strategies applied to a 2DOF (Degree Of Freedom) drone tracking robot. The developed 2DOF robot utilized a depth camera with an IMU (Inertial Measurement Unit), laser pointers, and servo motors to rapidly detect and track objects. Image processing was conducted using the YOLO deep learning model. Through this setup, controllers were attached to the robot to track random drone movements, comparing performances in terms of accuracy and energy consumption. This study revealed that while SMC demonstrated precise tracking without deviating from the path, both PID and MPC controllers showed deviations. Performance-wise, SMC is superior. However, considering economic aspects, PID is more advantageous due to its lower power consumption and relatively minor tracking errors.

• Smart Structures and Systems
• /
• 제20권1호
• /
• pp.85-97
• /
• 2017

The aim of this research is to develop a new method to use magnetorheological (MR) damper for vibration control. It is a new way to achieve the MR damper response without the need to have detailed constant parameters estimations. The methodology adopted in designing the control structure in this work is based on the experimental results. In order to investigate and understand the behaviour of an MR damper, an experiment is first conducted. Force-displacement and force-velocity responses with varying current have been established to model the MR damper. The force for upward and downward motions of the damper piston is found to be increasing with current and velocity. In cyclic motion, which is the combination of upward and downward motions of the piston, the force with hysteresis behaviour is seen to be increasing with current. In addition, the energy dissipated is also found to be linear with current. A proportional-integral-derivative (PID) controller, based on the established characteristics for a quarter car suspension model, has been adapted in this study. A fuzzy rule based PID controller (F-PID) is opted to achieve better response for a varying frequency input. The outcome of this study can be used in the modelling of MR damper and applied to control engineering. Moreover, the identified behaviour can help in further development of the MR damper technology.

• Journal of Biosystems Engineering
• /
• 제35권4호
• /
• pp.224-230
• /
• 2010

The purpose of this study was to develop position control system of an electric actuator for automatic shuttle shifting of a tractor. The electric actuator was installed at the link of the forward-reverse gearshift of the tractor transmission, and controlled in the ranges of forward, neutral, and reverse positions. The position control system of the electric actuator was developed based on PID (Proportional Integral Derivative) controller and transfer function of the electric actuator. The coefficients of the PID controller were determined by Ziegler-Nichols (Z-N) method and optimized using simulation program. The prototype AMT (Automated Manual Transmission) test unit of the tractor was installed and used to evaluate the performance of the position control. The evaluation system for the control performance consisted of forward-reverse actuator, motor driver, and controller. The tests were conducted as the controlled positions of the actuator were changed from neutral position to forward, neutral, and reverse positions in sequence. The sequential tests were repeated 20 times. The operations of changing the gearshift were considered as the step response of the control system. Maximum overshoot, settling time, and steady-state error were analyzed. The results showed that performance of the position control system was reasonable and qualified. The maximum overshoots, the steady-state errors, and the settling times of the position control system were 10~20%, 1~5%, and 0.92~1.49 sec, respectively. The modifications of the electric actuator will be required to enhance the performance of position control during field operation.

• 한국항행학회논문지
• /
• 제20권3호
• /
• pp.226-231
• /
• 2016

이동로봇의 제어는 로봇 분야에 있어 중요한 이슈이다. 이동로봇의 자율주행은 다양한 작업 환경에서 중시되고 있다. 자율 주행을 위해 이동로봇은 장애물을 감지, 회피하며 지능시스템을 도입한 제어 방식들을 사용해 충돌회피의 성능을 보완하는 연구가 활발히 진행되고 있다. 본 논문에서는 이동 로봇의 기구학적 모델을 분석하고 조향각 제어를 위한 type-2 fuzzy self-tuning PID 제어기를 설계하였다. Type-2 fuzzy 제어기는 type-1 fuzzy 제어기와 달리 복수 개의 값을 가지므로 언어표현의 모호함의 자유도가 높다. 본 논문에서는 설계된 제어기와 기존의 PID 제어기, type-1 fuzzy self-tuning PID 제어기를 비교하기 위한 방법으로 MATLAB Simulink를 사용하여 시뮬레이션을 하였다. 시뮬레이션 비교 결과 기존의 PID제어기와 type-1 fuzzy self-tuning PID 제어기의 성능보다 type-2 fuzzy self-tuning PID 제어기의 성능이 우수하다는 것을 확인하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제12권4호
• /
• pp.60-70
• /
• 2015

A front-end loader (FEL) mounted on an agricultural tractor is one of the most commonly used implements for farm work. However, when the tractor carries material using the bucket attached to the FEL on a sloping ground, the materials can spill or roll back over the operator due to the tilted body, thereby requiring the bucket surface to remain level at a constant value regardless of varying slopes. In this study, an active system for controlling the angle of the FEL bucket on a tractor based on the real-time measurement of ground slopes was developed to enable the bucket to constantly remain level. A FEL simulator operated based on an electro hydraulic proportional valve (EHPV) was constructed in the laboratory to develop a proportional-integral-derivative (PID) controller forming a virtual electronic control unit (ECU) on the computer, which could automatically adjust the bucket angles depending on varying input angles while sending SAE-J1939 associated messages via CAN BUS to the EHPV. The different parameter values for the PID controller due to the gravity effect of the bucket were determined using a manual PID tuning method while assuming that the tractor travels on either an ascending slope or a descending slope. The developed PID control-based self-leveling system showed a mean of steady-state errors of within $1^{\circ}$ and a mean of delayed times of ~ 0.8s when the step input of $+20^{\circ}$ was given, implying that the developed system and control algorithm would be effective in maintaining the bucket angle at a certain value. Future studies include the improvement of the control algorithm to reduce such a time delay as well as the application of the developed algorithm to the FEL mounted on a tractor tested at a testing ground.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권6호
• /
• pp.633-641
• /
• 2015

선박, 발전소, 석유화학 등의 분야에서 운전되고 있는 많은 프로세스들은 강한 비선형성을 보일 뿐만 아니라 동시에 시변 특성도 가지고 있다. 이런 프로세스에 기존의 고정-파라미터 PID 제어기를 적용하면 성능이 나빠지고 경우에 따라서는 불안정해질 수도 있다. 따라서 본 연구에서는 복잡한 프로세스를 제어하기 위한 비선형 PID 제어기를 제안한다. 제안되는 제어기의 이득은 오차와 오차의 변화율의 비선형 함수로 기술되며, 사용자 파라미터들은 ITAE를 최소로 하는 관점에서 유전알고리즘으로 동조된다. 제안된 방법은 열분해반응 또는 촉매를 이용한 고분자합성에 널리 사용되는 연속 교반탱크반응기를 대상으로 시뮬레이션을 실시하며, 그 유효성을 보이기 위해 다른 두 비선형/적응 제어법과 비교한다.