• Journal of the Korean Wood Science and Technology
• /
• 제12권4호
• /
• pp.12-18
• /
• 1984

열판온도(熱板溫度)가 내화약제(耐火藥劑)로 처리(處理)된 합판(處理)의 재건조(再乾燥) 후(後) 곡강도(曲强度)에 미티는 영향(影響)을 조사(調査)하기 위해 두께 3.5mm 메란티합판(合板)을 황산(黃酸)암모늄, 제1(第一)인산암모늄, 제2인산(第二燐酸)암모늄 그리고 혼합약제(混合藥劑)인 붕사(硼砂) 붕산(硼酸) 및 미나리스 등(等) 5종(種)의 내화제(耐火劑)의 20% 수용액(水溶液)에 9시간(時間)동안 침지처리(浸漬處理)한 다음, 각각(各各) 열판온도(熱板溫度) $90^{\circ}C$, $120^{\circ}C$ 및 $150^{\circ}C$를 적용(適用)한 단계별(段階別) 건조방식(乾燥方式)으로 건조(乾燥)하여 곡강도시험(曲强度試驗)을 행(行)하였다. 비례한계(比例限界)에서의 응력(應力), 탄성계수(彈性係數), 파괴계수(破壞係數) 및 비례한계(比例限界)까지의 단위체적당(單位體積當) 일 등(等)을 조사(調査)한 바, 수분처리대조구(水分處理對照區)의 경우, 열판온도(熱板溫度) $120^{\circ}C$까지 유지(維持)되던 강도(强度)가 $150^{\circ}C$에 이르러서는 현저한 감소경향(減少傾向)을 나타내었으나, 내화약제처리합판(耐火藥劑處理合板)은 $150^{\circ}C$까지 열판온도(熱板溫度)가 상승(上昇)함에도 불구(不拘), 강도(强度)가 유지(維持)되었으며 일부 약제처리(藥劑處理)의 경우엔 오히려 증가(增加)하는 양상(樣相)도 보여주었다. 건조속도(乾燥速度)와 강도유지(强度維持)의 측면(側面)을 고려할 때, 바람직한 열판건조온도(熱板乾燥溫度)는 $150^{\circ}C$ 였으며 내화약제중(耐火藥劑中) 보강효과(補强效果)가 가장 좋은 약제(藥劑)는 붕사(硼砂) 붕산(硼酸)이었다.

• 한국지반공학회논문집
• /
• 제39권12호
• /
• pp.7-22
• /
• 2023

본 연구에서는 입력가속도의 한계 범위를 흙의 상대밀도, 지하수위, 지반 조건을 고려하여 시간이력해석과 응답스펙트럼해석으로 분석하였다. 시간이력해석은 FLAC3D로 응답스펙트럼해석은 FB-Multipier를 이용하여 여러 지반 조건에 대한 수치해석을 실시하였다. 말뚝 주변 지반은 탄소성 물질로 가정하였다. FLAC3D 해석의 주변 지반은 Mohr-Coulomb과 Finn 모델로 설정하였고, FB-Multiplier 해석은 비선형 p-y 곡선을 이용하여 해석하였다. 비선형 지반 거동을 갖는 가속도의 한계범위는 주변 지반의 상대밀도에 비례함을 보였다. 해석 결과 SP soil이 SM soil보다 지반의 가속도의 한계범위가 훨씬 크고 지하수위는 지반조건에 관계없이 입력가속도의 한계범위를 감소시키는 경향이 있음을 알 수 있다. 또한 가속도의 한계 범위는 주로 전단탄성계수의 영향을 받는 것으로 나타났다.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.59-66
• /
• 2001

Fatigue strength of the welding structure is governed by the residual stress at the weldment toe and static tensile overloads were known as relieving the residual stresses. In this study, static tensile overloads were applied to the welding structures which caused the relief of residual stresses. The amount of residual stress relief was found as proportional to the change of fatigue limit at the given conditions. Based on the fact of the proportionality between the change of fatigue limit and that of residual stress, simple measurement technique is proposed. Modified stress-life curves base on proposed technique gave good agreement with test results.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.7-12
• /
• 2003

Mixture formation in the cylinder of a lean bum engine has been observed by Laser Induced Fluorescence technique. XeCl laser (308nm) was used to produce a laser sheet. 3-pentanone has been added to iso-octane fuel to produce fluorescence, the intensity of which is proportional to the concentration of the fuel. The laser sheet was introduced through the piston window and the fuel distribution in the vertical plane was observed through a side window. Comparison has been made for the cases of selected fuel injection timing as 0, 360, 405, and 450 CA. For the case of 0 and 360 CA injection, uniform fuel distribution in the combustion chamber has been obtained at the ignition time which is favorable for the high load mode. And the late injection cases, 405 and 450 CA, revealed the stratified formation of rich mixture around the spark plug. That extends the lean misfire limit and reduces cyclic variation in the low load mode.

• 대한전기학회논문지
• /
• 제35권8호
• /
• pp.316-322
• /
• 1986

In this paper, the photodoping effect on the interface of Ag-amorphous As2S3 thin film has been investigated by measuring the resistance change of the Ag layer, the absorption coefficient of the As2S3, the optical density of As2S3 layer and the short-circuit photocurrents under light irradiation. As the experimental results, the photodissolution rate and the photodiffusion rate depends on the magnitude of photon energy absorbed in the As2S3. The sensitivity limit of the photodissolution rate at Ag layer was about 630[nm] and the sensitivity limit of the photodiffusion rate at the Ag-As2S3 interface was about 680[nm]. Also, it was found that the depth of photodiffusion was proportional to the square root of exposing time.

• 분석과학
• /
• 제9권3호
• /
• pp.262-269
• /
• 1996

저준위 및 환경준위의 알파입자 방출핵종의 방사능을 측정하기 위한 다중선 비례계수기를 개발하였다. 비례계수기의 외부 크기는 $350{\times}290{\times}30mm$이고, 측정이 가능한 측정선원의 최대 면적은 $250{\times}200mm$이다. 비례계수기의 재질은 최소의 background와 외부충격에 의한 형태변형을 방지하기 위해 스테인리스 스틸을 사용하였고, 양극선 및 음극선의 재질은 직경 $50{\mu}m$의 스테인리스 스틸 wire로서, 전체 전극선의 수는 각각 21개와 42개이다. 계수효율을 최대로 하고 검출기벽에 의한 흡수효과를 제거하기 위해서 측정선원은 검출기 내부에 위치하도록 하였으며, 선원두께에 의한 효율변화를 방지하기 위하여 선원 높이를 10mm까지 조절할 수 있도록 설계하였다. 제작된 검출기는 plateau, 작동전압, background, 계수효율, 선원위치에 따른 감도, 에너지분해능 등의 특성조사를 수행하였다. $^{241}Am$ 핵종의 경우, 시료 1L를 처리하여 50,000초를 측정하였을 때의 LLD(Lower Limit of Detection)는 5.0 mBq/L로 산출되어 ISO(International Organization for Standardization)에서 규정하고 있는 환경준위의 알파업자 측정용 장치의 LLD인 40mBq/L 보다 낮은 방사능을 분석할 수 있는 양호한 환경방사능 측정장치인 것으로 판명되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.377-380
• /
• 1998

Basting vibration and air blast were measured by particle velocity and overpressure as well as environmental unit, dB(V) and dB(A). Variables for vibration and noise show good relationship and proportional equations are suggested. But there are some variations, and it means that predictions by design variables are not valid for human damage estimation or limit application of regulations.

• Archives of Pharmacal Research
• /
• 제11권1호
• /
• pp.56-60
• /
• 1988

A thin layer flow cell with cell volume of $8\;{\mu}{\ell}$ was constructed. Diffusion currents of ascorbic acid was directly proportional to the 1/3 power of volume flow rates. A linear dynamic range was obtained at the concentration range between $10^{-7}\;M\;and\;10^{-4}\;M$ of ascorbic acid with a detection limit of $10^{-8}\;M$. Ascorbic acid in the multivitamin product was amperometrically determined at TLFC after simply dissolving mg range ground product in $100m{\ell}$ of pH 7.0 phosphate buffer.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.99-105
• /
• 2004

The effects of pressure on combustion characteristics of the conical flameholder were investigated experimentally in the pressure range from 0.11 ㎫ to 0.40 ㎫. The result shows that the total equivalence ratio of lean limit becomes lower as the combustor inlet pressure rises and NOx emission is proportional to the pressure to the 0.5th power.

• 농업과학연구
• /
• 제48권3호
• /
• pp.597-606
• /
• 2021

Due to the characteristics of the farmland in Korea, forward and reverse shift is the most used. The fatigue of farmers is caused by forward and reverse shifting with a manual transmission. Therefore, it is necessary to improve the convenience of forward and backward shifting. This study was a basic study on the development of a current control system for forward and reverse shifting of agricultural tractors using proportional control valves and a controller. A test bench was fabricated to evaluate the current control accuracy of the control system, and the stability of the controller was evaluated through CPU (central processing unit) load measurements. A controller was selected to evaluate the stability of the proportional valve controller. The stability evaluation was performed by comparing and analyzing the command current of the controller and the actual current measured. The command current was measured using a CAN (controller area network) communication device and DAQ (data acquisition). The actual current was measured with a current probe and an oscilloscope. The control system and stability evaluation was performed by measuring the CPU load on the controller during control operations. The average load factor was 12.27%, and when 5 tasks were applied, it was shown to be 70.65%. This figure was lower than the CPU limit of 74.34%, when 5 tasks were applied and was judged to be a stable system.