• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.993-993
• /
• 2014

Increasing the density magnetic recording of a hard disk drive needs to improve position control of a slider. We have troubles analyzing position of a slider by nonlinear property of pivot ball bearing. Many researches analyze a hard disk drive to change pivot ball bearing part from balls to springs. Pivot ball bearing operates by rotation and movement of balls. This study considers Hertzian contact force when balls contact with outer race to analyze nonlinear movement of a ball bearing. Experiment of this study measures movement of a circular center of a pivot ball bearing. We also verify the simulation results and the experiment results.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.2
• /
• pp.81-85
• /
• 1998

Three polymorphic modifications and two pseudopolymorphic modifications of cefotaxime sodium were obtained by crystallization from different organic solvents. The isolated crystal forms were characterized by UV spectrophotometry, DSC, TGA and X-ray crystallography. Crystal forms of cefotaxime sodium were also compared by dissolution rate. The dissolution rate of form 1 was the highest, followed by form 2, form 4, form 6, form 5 and form 3. Among these polymorphic modifications the dissolution rate of form 3 and form 5 was much slower than that of cefotaxime sodium on the market. All forms showed no change after 2-month storage test in the silica gel desiccator. But after the storage of 2-month at 95% relative humidity condition, all forms were deliquesced by hygroscopic property except form 1 that showed the highest dissolution rate. At 52% relative humidity condition, form 1, form 2 and form 6 had no evidence of phase transformation, but form 3, form 4 and form 5 were also deliquesced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.2
• /
• pp.98-102
• /
• 2004

Ion exchange behavior and property change of soda-lime-silicate glass by advanced ion exchange process were investigated. Refractive index, specific gravity and optical transmittance were changed similarly to $K^+$ ion penetration depth, and amount of ion exchange increased with the increase of the time and temperature. Especially, thermal expansion decreased greatly because of the structural compaction and residual stress by ion exchange process.

• Journal of the Korea Furniture Society
• /
• v.25 no.3
• /
• pp.213-224
• /
• 2014

Advertising provides consumers with information about products, purchasing effect and criteria. Advertising of the domestic bed companies started in the 1990's and each company focused on publicizing its brand. As the times change, however, they begin to express the quality-property which consumers demanded in the advertising. This research examined the advertising trends in the domestic and foreign bed companies. Also, it presents how the quality control (QC) is reflected on the advertising of the domestic and foreign bed companies. As a result of the analysis on bed-advertising of them, the things mostly represented as a determinant of product quality are performance, shape/quality, recognition and reliability. On the side of consumers, however, service, durability and stability are mirrored in the advertising and help choose the products as the determinants.

• School Mathematics
• /
• v.1 no.2
• /
• pp.555-569
• /
• 1999

The graph unit(chapter) is a good example of a topic in elementary school mathematics for which computer use can be incorporated as part of the instruction. Teaching graph can be facilitated by using the graphing utilities of computers, which make it possible to observe the property of many types of graphs. This study was concerned with utilizing an educational software Graphers as an instructional tool in teaching to help young students gain a better understanding of graph concepts. For this purpose, three types of instructional activities using Graphers were shown in the paper. Graphers is a data-gathering tool for creating pictorial data chosen from several data sets. They can represent their data on a table or with six types of graphs such as Pictograph, Bar Graph, Line Graph, Circle Graph, Grid Plot and Loops. They help students to select the graph(s) which are the most appropriate for the purpose of analyzing data while comparing various types of graphs. They also let them modify or change graphs, such as adding grid lines, changing the axis scale, or adding title and labels. Eventually, students have a chance to interpret graphs meaningfully and in their own way.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.4
• /
• pp.231-238
• /
• 1997

Tantalum oxide thin filme has an amorphous structure and a high resistivity. Its stoichiometric structure was $Ta_2O_{5.3}$ and the transmission ratio was 80%. The high resistivity of $Ta_2O_{5.3}$ thin film electrolyte made an EC windows without electrical shottness, but the bleached/colored cur rent was very low because of the low ion conductivith. Upon adding moisture into the system, the $\Delta$T increased upto 25 %. proton concentration increase was the main cases to improve optical property. The influence of adding precious or transition metal film(~100 $\AA$ thickness) in $Ta_2O_5$layer on the color change performance was observed. The metal insertion layers had formed hydroxide and they behaved as a stable proton source. The transmission diffrnece and cycle life were greatly enhanced in the case of Ti inssertion.The $\Delta$T was 50% and the cycle life was 18, 000.

• Ceramist
• /
• v.22 no.4
• /
• pp.393-401
• /
• 2019

Thermal analysis means the analysis of a change in a property of a sample, which is related to an imposed temperature alteration. Measurements are usually made with increasing temperature, but isothermal measurements or measurements made with decreasing temperatures are also possible. In fact, any measuring technique can be made into a thermal analysis technique by adding thermal control. Simultaneous use of multiple techniques increases the power of thermal analysis, and modern instrumentation has permitted extensive growth of application. The basic theories of thermal analysis are well developed and some of them are explained in this paper.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1275-1276
• /
• 2006

As developing the information society, Lighting Emitted diode(LED) which is light source for illumination of next generation is attracted public attention. LED have many problem as narrow light view angle, high price, drift phenomenon of color coordinate, high heating problem for lower power, lower weight and small size. So, many researches have continued in a illumination as LED module type. in this problem, heating problem is very important and difficult and that is caused in decreasing phenomenon of brightness and drift phenomenon of color coordinate. so the problem of heating is urgent question for illumination of LED. In this paper, structural design of PCB changed as two type for solving the heating problem. also the properties of heating is analysed and optical properties is measured with heating image camera and spectrometer according to change in this design.

• Elastomers and Composites
• /
• v.51 no.2
• /
• pp.128-137
• /
• 2016

The effect of the surface area of silicas on their reinforcing performance to styrene-butadiene rubber (SBR) compounds was systematically investigated. The feasibility of the Brunauer-Emmett-Teller surface area ($S_{BET}$) as a parameter representing the characteristics of the silicas was discussed compared to the mesopore volume, c value, oil absorption, and uptake of silane. The increase in $S_{BET}$ of silicas caused a considerable increase in Mooney viscosity, minimum torque, and hysteresis loss of the silica-filled SBR compounds, while significantly enhancing their abrasion property. These changes were explained by the attrition between the hydrophilic silica surface and the hydrophobic rubber chains. As expected, the change in $S_{BET}$ did not induce any remarkable changes in the cure, processing, tensile, and dynamic properties of the silica-filled SBR compounds because the crosslinking density of the rubber chains mainly determined these properties.

• Journal of Welding and Joining
• /
• v.16 no.2
• /
• pp.122-128
• /
• 1998

This investigation was performed to collect fundamental informations concerning the behavior of glass solders on ceramic joining process. The wettability of glasses on two types of alumina was evaluated by sessile drop method. SiO$_2$-CaO-Al$_2$O$_3$system glasses were selected as solder glasses, and alumina that have different purities were used for substrate materials. It is indicated that contact angles of glasses on 99% purity of alumina substrate do not change as increasing time at elevated temperature, however the contact angles on the 92% purity of alumina substrate exhibit the strong time dependency. The time-dependent property on 92% alumina was due to the interlayer reactions occurred between the glass solder and impurities on the substrate.