• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.13-14
• /
• 2007

투명전극으로 사용되는 ITO는 우수한 전기적, 광학적 특성으로 인하여 널리 사용되고 있다. 하지만, ITO는 저온공정의 어려움과 ITO의 원료물질인 In의 수급이 불안정하여 원자재의 가격이 높고, 수소 플라즈마에 노출시 열화로 인한 광학적 특성의 변화가 문제점으로 지적되고 있다. 본 논문에서는 ITO 투명전극을 대체하기 위한 실험으로 Al 이 도핑된 ZnO(ZnO:Al) 박막을 상온에서 유리기판 위에 RF 마그네트론 스퍼터 법을 이용하여 제조하였다. 증착된 박막은 ITO물질을 대체하기 위한 투명전극으로의 응용을 위해 후 열처리를 실시하였다. 설정된 열처리 온도는 각각 400도와 300도로 설정하였고 열처리 시간에 따른 변화를 관찰하였다. 열처리된 시편은 각각 XRD, SEM, Hall, U/V 측정을 하여 변화를 관찰하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.6
• /
• pp.64-74
• /
• 2010

This paper proposes a new TR-based baseline-free SHM technique in which the time-reversal (TR) property of the guided Lamb waves is utilized. The new TR-based SHM technique has two distinct features when compared with the other TR-based SHM techniques: (1) The backward TR process commonly conducted by the measurement is replaced by the computation-based process; (2) In place of the comparison method, the TOF information of the damage signal extracted from the reconstructed signal is used for the damage diagnosis in conjunction with the imaging method which enables us to represent the damage as an image. The proposed TR-based SHM technique is then validated through the damage diagnosis experiment for an aluminum plate with a damage at different locations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.159-159
• /
• 2013

In this studying, we investigated the basic properties of N-doped plasma polymer. The N-doped plasma polymer thin films were deposited by radio frequency (13.56 MHz) plasma-enhanced chemical vapor deposition method. Various carbon-source were used as organic precursor with hydrogen gas as the precursor bubbler gas. Additionally, ammonia gas [NH3] was used as nitrogen dopant. The as-grown polymerized thin films were analyzed using cyclic voltammetry, ellipsometry, Fourier-transform infrared [FT-IR] spectroscopy, Raman spectroscopy, FE-SEM, and water contact angle measurement. Electronic property of N-doped plasma thin film is changed as flow rate of the NH3 gas.

• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.41-47
• /
• 2024

Recently, as the practical application and commercialization of unmanned aerial vehicles (UAVs) is pursued, interest in ensuring the safety of the UAV is increasing. Because UAV accidents can result in property damage and loss of life, it is important to develop technology to prevent accidents. For this reason, a technique to detect the abnormal flight state of UAVs has been developed based on the AutoEncoder model. However, the existing detection technique is limited in terms of performance and real-time processing. In this paper, we propose a U-Net based abnormal flight detection technique. In the proposed technique, abnormal flight is detected based on the increasing rate of Mahalanobis distance for the reconstruction error obtained from the U-Net model. Through simulation experiments, it can be shown that the proposed detection technique has superior detection performance compared to the existing detection technique, and can operate in real-time in an on-board environment.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.677-684
• /
• 2000

Piezocone test as well as Dilatometer tests are used worldwide to evaluate the engineering properties of clay soils. The common strong point of the two tests is that they can estimate, by the identical test equipment, various properties of soils, which are the unit weight of soils of OCR, K$\sub$o/, undrained shear strength(s$\sub$u/), coefficient of consolidation(c$\sub$h/) and soil classification etc,. A series of the two types of field tests are performed in this study on marine clays with low plasticity at Inchon International Airport construction site to estimate various properties of the soils such as s$\sub$u/, OCR, and c$\sub$h/, which are then compared each other as well as with the results of reference tests. The comparisons show that the way of interpretation is the most critical factor in obtaining confidential results for a certain engineering property for both tests.

• Textile Coloration and Finishing
• /
• v.13 no.5
• /
• pp.48-48
• /
• 2001

The effects of silane coupling agent on the performance properties of cotton fabrics treated with loess and its washing durability were investigated. Mean average diameter of loess was 17.88㎛ and main components were SiO₂, Al₂O₃ and Fe₂O₃. By using the cationic agent, the dyeability of cotton fabrics was improved. The washing durability, antibacterial property and deodorization rate were improved and very good emissivities of far infra-red rays were obtained by using the silane coupling agent. And also the mechanical properties of cotton fabrics, such as primary hand values, were improved.

• Communications for Statistical Applications and Methods
• /
• v.8 no.2
• /
• pp.395-406
• /
• 2001

In this paper, we propose the test statistic for the umbrella alternatives on c-samples ranked set samples(RSS), where the peak of the umbrella is known. We obtain the asymptotic property of the proposed test statistic and the asymptotic relative efficiencies of the proposed test statistic with respect to U-statistic based on simple random samples(SRS). From the simulation work, we compare the empirical powers of the proposed test statistic with U-statistic based on SRS.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.280-283
• /
• 2002

In the manufacturing of large scale composite structures, the cost-effective processing and the enhancement of structural performance are critical. One of the most effective ways for this purpose is to use stitched multiaxial warp knitted (MWK) perform in the resin transfer molding process. This study reports the effect of stitching on the mechanical properties of MWK composites, and the feasibility processing of the thick U-beam structure utilizing the stitched preforms. Permeability of the preform, viscosity and cure property of the epoxy resin have been measured. The results of resin flow analysis has been used in determining the gate/vent locations of the RTM mold. Cross-sectional observation of the channel beam prototype demonstrated that the resin impregnation was almost complete, except for some surrounding area of stitched yarns.

• Herbal Formula Science
• /
• v.12 no.1
• /
• pp.177-193
• /
• 2004

Objectives: This study has been done to compare the Haematite's composition before and after using processing method and to clarify its quality and naming through the historical herbal books. Methods: I studied the Haematite and processed Haematite using physical and chemical methods which contain microscopic analysis, X-ray diffraction analysis, thermal analysis, XRF, ICP, etc, to compare the compositions and its characters. Results: Haematite is a metallic oxide(Hematite, $Fe_2O_3$). Haematite contains a main ingredients of crude Haematite Fe 40.336% - 62.174%, processed Haematite $50.499%{\sim}62.791%$(a theory value is 69.944% the korean pharmacopoeia wants >45%) and small ingredients, also. Conclusion: A radio-element contents of U, Th contain less than average contents of the lithosphere's U 1.8ppm, Th 7.2ppm.

• Honam Mathematical Journal
• /
• v.31 no.4
• /
• pp.515-527
• /
• 2009

Let R be a commutative ring with identity. Then we prove $M_n(R)=GL_n(R)$ ${\cup}${$A{\in}M_n(R)\;{\mid}\;detA{\neq}0$ and det $A{\neq}U(R)$}${\cup}Z(M-n(R))$ where U(R) denotes the set of all units of R. In particular, it will be proved that the full matrix ring $M_n(F)$ over a field F is the disjoint union of the general linear group $GL_n(F)$ of degree n over the field F and the set $Z(M_n(F))$ of all zero-divisors of $M_n(F)$. Using the result and universal mapping property we prove that $M_n(F)$ is its total ring of fractions.