• Bulletin of the Korean Mathematical Society
• /
• v.49 no.5
• /
• pp.1027-1040
• /
• 2012

The aim of this paper is to study the Weyl type-theorems for the orthogonal direct sum $S{\oplus}T$, where S and T are bounded linear operators acting on a Banach space X. Among other results, we prove that if both T and S possesses property ($gb$) and if ${\Pi}(T){\subset}{\sigma}_a(S)$, ${\PI}(S){\subset}{\sigma}_a(T)$, then $S{\oplus}T$ possesses property ($gb$) if and only if ${\sigma}_{SBF^-_+}(S{\oplus}T)={\sigma}_{SBF^-_+}(S){\cup}{\sigma}_{SBF^-_+}(T)$. Moreover, we prove that if T and S both satisfies generalized Browder's theorem, then $S{\oplus}T$ satis es generalized Browder's theorem if and only if ${\sigma}_{BW}(S{\oplus}T)={\sigma}_{BW}(S){\cup}{\sigma}_{BW}(T)$.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.786-791
• /
• 2016

Spherical graphene balls were fabricated by an aerosol spray drying process after reduced graphene oxide was prepared by the liquid phase reaction using glucose as an environment-friendly reducing agent. Spherical morphology of the as-fabricated particles was observed by FE-SEM analysis. Diffraction patterns of spherical particles were found as graphene by XRD analysis. Sphericity of GB was controlled by the variation of operating temperature, amount of glucose, and addition of $NH_4OH$. Higher sphericity of GB was prepared at higher operating temperature in the presence of $NH_4OH$. As the amount of glucose in the liquid phase reaction increased in the presence of $NH_4OH$, sphericity of GB increased. The highest sphericity of GB was 1.1. GB of higher sphericity showed lower aggregation property than that of lower sphericity. Furthermore, as-prepared GBs were found as a potential electrode material for capacitor.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.141-149
• /
• 2018

In this study, compacting, passing performance, segregation resistance and rheological properties were tested to improve the stability of fresh concrete in the production and construction of self-compacting concrete (SCC) using hollow glass powder(GB). As a result, T50 reaching time was shortened up to amount of GB $2.0kg/m^3$. The compacting according to the amount of GB was improved by ball bearing effect of GB. However, T50 reaching time was slightly increased at $4.0kg/m^3$. In the case of passing performance, the result showed that plain was Class 1, GB $0.5{\sim}2.0kg/m^3$ was Class 0, GB $4.0kg/m^3$ was Class 1. Therefore, the passing performance was improved with 'No blocking' up to amount of GB $2.0kg/m^3$. Passing performance Block step (PJ) number by J-ring method was also best at GB $1.0kg/m^3$. In the case of segregation resistance according to the amount of GB, dynamic segregation resistance was increased compared to plain regardless of the amount of GB. And static segregation resistance showed 2.5% of segregation rate at GB $1.0kg/m^3$. Therefore, it was greatly improved compared to plain (12.5%). In the case of rheology property according to the amount of GB, plastic consistency by increasing of GB content didn't show big difference. However, yield stress by increasing of GB content was decreased with GB $1.0kg/m^3$. In conclusion, GB $1.0kg/m^3$ was effective for improvement of compacting, passing performance and yield stress. Also, it will be useful for stability of SCC by improving segregation.

• Kyungpook Mathematical Journal
• /
• v.55 no.3
• /
• pp.531-540
• /
• 2015

If T is an unbounded hyponormal operator on an infinite dimensional complex Hilbert space H with ${\rho}(T){\neq}{\phi}$, then it is shown that T satisfies Weyl's theorem, generalized Weyl's theorem, Browder's theorem and generalized Browder's theorem. The equivalence of generalized Weyl's theorem with generalized Browder's theorem, property (gw) with property (gb) and property (w) with property (b) have also been established. It is also shown that a-Browder's theorem holds for T as well as its adjoint $T^*$.

• Herbal Formula Science
• /
• v.21 no.2
• /
• pp.144-157
• /
• 2013

Objectives : The aim of this study was to evaluate the efficacy of Hwangnyeonhaedok-tang (HH) and Geongangbuja-tang (GB) on the plasma hormone level in mice exposed to cold stress. HH and GB are the representative prescriptions of cold and hot property, respectively. Methods : We established cold condition by confining ICR mice to a $4^{\circ}C$ cage for 24 hours, ICR mice were given a HH (100, 300, 1000 mg/kg) or GB (100, 300, 1000 mg/kg) extract orally twice a day for three consecutive days. From the second day, they were given cold stress ($4^{\circ}C$) for twenty four hours. To measure the plasma corticosterone, insulin, thyroxine, epinephrine and norepinephrine levels of mice, their blood samples were collected from cardiac puncture, immediately centrifuged at $4^{\circ}C$. The protein level of HSP70 and JNK was examined using western blot analysis in cortex and hypothalamus. Results : Oral administration of GB more significantly reduced plasma corticosterone level raised by cold stress than HH. Gardeniae Fructus (CJ), the constituent of HH, significantly increased the thyroxine level. Western blot analysis showed that cold stress-induced Heat shock protein 70 (HSP70) expression was increased by HH and GB, HH decreased JNK expression and GB increased JNK expression dose-depently in hypothalamus. Scutellariae Radix (HG), Zingiberis Rhizoma (GG) and Aconiti Tuber (BJ) decreased HSP70 in hypothalamus and GG, BJ decreased HSP70 in cortex as well. Conclusions : These results suggest Geongangbuja-tang (GB) is more effective for ameliorating the stress response caused by cold stress.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.09a
• /
• pp.183-192
• /
• 2001

1- Buildup PCB technology is utilized to a bare chip attach substrate technology for packaging of semiconductor chip 2- Requirement for the substrate design rule is described in SIA International Technology Roadmap for Semiconductor. 3- There are seven fabrication methods of build-up technology. 4- Coating and lamination for resin and photo, and laser for micro via hope processes are available. Below $50\mu\textrm{m}$ in diameter is possible. 5- Fine pitch lines down to $30\mu\textrm{m}$ can be achieved by pattern plating with better electrical property. 6- Dielectric loss reduction is a key material improvement item for next generation build-up technology. 7- High band width up to 512 GB/s is possible with current wiring groundrule.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.6
• /
• pp.703-710
• /
• 2009

The spectral irradiance and underwater transmission characteristics of a combined high-luminance light-emitting diode (LED) lights have been studied to evaluate suitable light sources for fishing lamps of the next generation. The wavelengths at which the irradiance was maximum were changed from 473, 501, 525, and 465 nm for blue, peacock blue, green, and white LED light to 475, 504 and 528 nm for [$F_{WB}$], [$F_{PB}$] and [$F_{GB}$] combined LED lights, respectively. If the irradiance characteristics at 400-700 nm wavelengths are set as 100%, the irradiance rates at 450-499 nm and 500-549 nm were decreased from 82.4% and 56% for blue, peacock blue LED light to 60.0%, 38.5% for [$F_{WB}$], [$F_{WP}$] combined LED lights. The underwater transmission characteristics of the combined LED lights were superior in the order [$F_{WB}$], [$F_{BP}$], [$F_{GB}$] in optical water type I; [$F_{WB}$], [$F_{PB}$], [$F_{GP}$] in optical water type II-III; and [$F_{GP}$], [$F_{WP}$], [$F_{PB}$] in optical water type 1. Setting the 10m depth underwater transmission characteristics of the combined LED lights in optical water type I at 100%, the transmission of water types II, III and 1 drops to 29.5%, 8.0% and 2.2%. Based on the distribution of spectral irradiance and underwater transmission characteristics calculated in optical water types II-III, where was the jigging ground for fishing lamps, the [$F_{WB}]$ and [$F_{GP}$] combined LED lights can be used as a suitable light sources for fishing lamps of the next generation.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.41-46
• /
• 2018

Six sigma methodology is the management tools not only can cause productivity enhancement through the quality control and cost reduction of products and services but also can be applied to various activities of corporates such as research and development. Development of high-density information storage media and devices is indispensible to accomplish the information convergence era. In this paper, we report the case of applying six sigma methodology and tools to the development project of high-density information storage media. The standard DMAIC process was applied to the project and pursuing goals and tools and results in each stage were explained in detail. By adopting the methodology, we could establish fabrication methods of information storage media of recording density higher than $250Gb/in^2$ with high uniformity and reproducibility. The magnetic property and performance of fabricated media were confirmed through measurement of the magnetic hysteresis curve.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.11
• /
• pp.13-19
• /
• 2015

Construction materials using soil which is the most common material around us have many advantages, but their long-term durability and sensation of walking as pavements have problems. Therefore, they are used after compaction or mixed with various hardening agents such as lime and cement for strength enhancement. However, studies on the behavior of pavement materials mixed with environment-friendly hardening agents or admixtures to improve walking property are still insufficient. In this study, therefore, in order to evaluate the appropriate mixing ratio and field application characteristics of pavement materials using mixed soils with environment-friendly hardening agents and natural materials such as wood chips, mechanical tests were performed to evaluate the rational mixing ratios and the ball test was performed as an elasticity test to evaluate the field applicability. The results suggest that the content of wood chips should be selected at 1.5% or lower according to the purpose of the structure, and the hardening agent at 10~15%. The evaluation results for GB/SB coefficient ratio which indicates the walking property show that the appropriate mixing ratio of the hardening agent in terms of the sensation of walking is 15% of lower, but different mixing ratios should be chosen according to the proportion of wood chips.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.2
• /
• pp.99-109
• /
• 2016

The utilization of Building Information Modeling (BIM) has increased in order to enhance the integration of information for management and resources throughout the construction projects. Therefore, various BIM softwares have been used under open BIM environments in the building and plant construction industry. However, it has obstructive factors due to the lack of interoperability. In order to address this problem, this study conducted an interoperability analysis of BIM software focused on user-defined properties for enhanced function and efficiency. Result of the analysis shows that authoring tools have more interoperability problems than viewer tools and simulation tools have. In terms of interoperability, user-defined properties outperforms than those of system basic properties and logic data. Therefore, it was found that functional improvement and workload minimization in BIM can be attained by applying the GBS (an user-defined property for automatic manipulation of BIM proposed by Jung et al. 2013) that enables automatic link between geometric data and non-geometric data. In this respect, this study concludes that the application of user-defined property (e.g. GBS) can be an effective method for information integration throughout construction projects.