• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.87-95
• /
• 2018

PURPOSES : A geo-grid pavement, e.g., a stress-absorbing membrane interlayer (SAMI), can be applied to an asphalt-overlay method on the existing surface-pavement layer for pavement maintenance related to reflection cracking. Reflection cracking can occur when a crack in the existing surface layer influences the overlay pavement. It can reduce the pavement life cycle and adversely affect traffic safety. Moreover, a failed overlay can reduce the economic value. In this regard, the objective of this study is to evaluate the bonding properties between the rigid pavement and a SAMI by using the direct shear test and the pull-off test. The predicted fractural energy functions with the shear stress were determined from a numerical analysis of the moving average method and the polynomial regression method. METHODS : In this research, the shear and pull-off tests were performed to evaluate the properties of mixtures constructed using no interlayer, a tack-coat, and SAMI with fabric and without fabric. The lower mixture parts (describing the existing pavement) were mixed using the 25-40-8 joint cement-concrete standard. The overlay layer was constructed especially using polymer-modified stone mastic asphalt (SMA) pavement. It was composed of an SMA aggregate gradation and applied as the modified agent. The sixth polynomial regression equation and the general moving average method were utilized to estimate the interlayer shear strength. These numerical analysis methods were also used to determine the predictive models for estimating the fracture energy. RESULTS : From the direct shear test and the pull-off test results, the mixture bonded using the tack-coat (applied as the interlayer between the overlay layer and the jointed cement concrete) had the strongest shear resistance and bonding strength. In contrast, the SAMI pavement without fiber has a strong need for fractural energy at failure. CONCLUSIONS : The effects of site-reflection cracking can be determined using the same tests on cored specimens. Further, an empirical-mechanical finite-element method (FEM) must be done to understand the appropriate SAMI application. In this regard, the FEM application analy pavement-design analysis using thesis and bonding property tests using cored specimens from public roads will be conducted in further research.

• Journal of Biosystems Engineering
• /
• v.20 no.2
• /
• pp.162-172
• /
• 1995

The ventilation in greenhouse have been important for such as adjustment of temperature, supplying of the oxygen, prevention of the overhumidity, density adjustment of $CO_2$, discharge of harmfulness gas, etc. However, the general ventilation which had been used the quantitative control method in discharge of a property of air mechanism in greenhouse, and caused mainly in waste of the heating energy and growth obstacle of the vegetable. Therefore, this study was peformed to obtain more scientific ventilation method using by analysis and measurement of the isothermal lines according to opening of window ventilation in greenhouse, and the results are summarized as follows. 1. The ventilating amount was more influenced by rather opening amount of window than the ventilating time. 2. In window ventilation, the temperature in greenhouse was mostly changed within 5 minutes after ventilating not regard to the spot of opening, after about 10 minutes temperature became to equilibrium state under the respective ventilating conditions. 3. In opening of the skylight only, isothermal lines were complicated, therefore, a tall vegetable may be possible to damage by a cold-weather from the lower central port in greenhouse. 4. Isothermal lines were a tendency to simply in opening of a side window that may be more effective ventilation in kinds of the short vegetable. 5. In conditions of internal temperature>setting temperature>external temperature, a skylight can be suitable to open 10~20cm in order to the optimum ventilation in greenhouse. 6. In conditions of internal temperature>external temperature>setting temperature, opening of all the windows or both the side windows that can be suitable in order to obtain the optimum ventilation in greenhouse. 7. An effect of ventilation was the most excellent to open of all the windows or both the side windows, and it were also found orderly excellent to open of the side window and the skylight or the skylight only, to open of the side window only. 8. Temperature was varied as the equation of T=Tc+ (To-Tc)e-at, and the ranges of (a) values were limited within 0.34~0.68. 9. A variations of humidity were similar to that of temperature, s.

• Journal of the Korean Home Economics Association
• /
• v.43 no.6 s.208
• /
• pp.113-131
• /
• 2005

The purpose of this study was to investigate older people's planning for estate distribution by examining the factors associated with their will-holding status. This study used data from the 1994 Assets and Health Dynamics among the Oldest Old (AHEAD) Survey, Wave One. The objectives of this study were (a) to establish profiles of older people who have a written will and to compare their financial portfolios across will-holding status; (b) to identify factors that influence the decision to make a will, and (c) to draw implications for family economists, financial educators, planners, and policy makers. The results suggested that a household's financial resources (i.e., liquid and illiquid assets, housing equity, and household income) positively influence the probability of having a will. Older people who resided in a community property state and who were in poor health were less likely to be will-holders than their counterparts, holding financial resources and other variables constant. Demographic characteristics such as age, education, and race, and behavioral characteristic also were significant determinants of the likelihood of having a will. Volunteer participation and charitable contribution, which are proxies for altruism, increased the likelihood of having a will. The probability of having a will also was higher among those who had life insurance and had gwen inter-vivos gifts of more than $\$5,000$ to their children or grandchildren in the past 10 years. On the other hand, the likelihood of having a will declined with increasing number of biological children. From the findings, implications for financial planners and educators were suggested along with directions for future research.

• Communications of Mathematical Education
• /
• v.37 no.3
• /
• pp.349-368
• /
• 2023

The revised 2022 educational curriculum highlighted the significance of mathematical literacy as a foundational competency that can be cultivated through the learning of various subjects, along with language proficiency and digital literacy. However, due to the lack of a precise definition for mathematical literacy, there exists a challenge in systematically implementing it across all subjects in the educational curriculum. The aim of this study is to clarify the definition of mathematical literacy in the curriculum through a literature review and to analyze the application patterns of mathematical literacy in other subjects so that mathematical literacy can be systematically applied as a basic literacy in Korea's curriculum. To achieve this, the study first clarifies and categorizes the meaning of mathematical literacy through a comparative analysis of terms such as numeracy and mathematical competence via a literature review. Subsequently, the study compares the categories of mathematical literacy identified in both domestic and international educational curricula and analyzes the application of mathematical literacy in the education curriculum of New South Wales (NSW), Australia, where mathematical literacy is reflected in the achievement standards across various subjects. It is expected that understanding each property by subdividing the meaning of mathematical literacy and examining the application modality to the curriculum will help construct a curriculum that reflects mathematical literacy in subjects other than mathematics.

• The KIPS Transactions:PartD
• /
• v.12D no.6 s.102
• /
• pp.817-828
• /
• 2005

The main research problems in a mining frequent itemsets are reducing memory usage and processing time of the mining process, and most of the previous algorithms for finding frequent itemsets are based on an Apriori-property, and they are multi-scan algorithms. Moreover, their processing time are greatly increased as the length of a maximal frequent itemset. To overcome this drawback, another approaches had been actively proposed in previous researches to reduce the processing time. However, they are not efficient on a sparse .data set This paper proposed an efficient mining algorithm for finding frequent itemsets. A novel tree structure, called an $L_2$-tree, was proposed int, and an efficient mining algorithm of frequent itemsets using $L_2$-tree, called an $L_2$-traverse algorithm was also proposed. An $L_2$-tree is constructed from $L_2$, i.e., a set of frequent itemsets of size 2, and an $L_2$-traverse algorithm can find its mining result in a short time by traversing the $L_2$-tree once. To reduce the processing more, this paper also proposed an optimized algorithm $C_3$-traverse, which removes previously an itemset in $L_2$ not to be a frequent itemsets of size 3. Through various experiments, it was verified that the proposed algorithms were efficient in a sparse data set.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.288-289
• /
• 2011

Indium Tin Oxide (ITO) is a typical highly Transparent Conductive Oxide (TCO) currently used as a transparent electrode material. Most widely used deposition method is the sputtering process for ITO film deposition because it has a high deposition rate, allows accurate control of the film thickness and easy deposition process and high electrical/optical properties. However, to apply high quality ITO thin film in a flexible microelectronic device using a plastic substrate, conventional DC magnetron sputtering (DMS) processed ITO thin film is not suitable because it needs a high temperature thermal annealing process to obtain high optical transmittance and low resistivity, while the generally plastic substrates has low glass transition temperatures. In the room temperature sputtering process, the electrical property degradation of ITO thin film is caused by negative oxygen ions effect. This high energy negative oxygen ions(about over 100eV) can be critical physical bombardment damages against the formation of the ITO thin film, and this damage does not recover in the room temperature process that does not offer thermal annealing. Hence new ITO deposition process that can provide the high electrical/optical properties of the ITO film at room temperature is needed. To solve these limitations we develop the Magnetic Field Shielded Sputtering (MFSS) system. The MFSS is based on DMS and it has the plasma limiter, which compose the permanent magnet array (Fig.1). During the ITO thin film deposition in the MFSS process, the electrons in the plasma are trapped by the magnetic field at the plasma limiters. The plasma limiter, which has a negative potential in the MFSS process, prevents to the damage by negative oxygen ions bombardment, and increases the heat(-) up effect by the Ar ions in the bulk plasma. Fig. 2. shows the electrical properties of the MFSS ITO thin film and DMS ITO thin film at room temperature. With the increase of the sputtering pressure, the resistivity of DMS ITO increases. On the other hand, the resistivity of the MFSS ITO slightly increases and becomes lower than that of the DMS ITO at all sputtering pressures. The lowest resistivity of the DMS ITO is $1.0{\times}10-3{\Omega}{\cdot}cm$ and that of the MFSS ITO is $4.5{\times}10-4{\Omega}{\cdot}cm$. This resistivity difference is caused by the carrier mobility. The carrier mobility of the MFSS ITO is 40 $cm^2/V{\cdot}s$, which is significantly higher than that of the DMS ITO (10 $cm^2/V{\cdot}s$). The low resistivity and high carrier mobility of the MFSS ITO are due to the magnetic field shielded effect. In addition, although not shown in this paper, the roughness of the MFSS ITO thin film is lower than that of the DMS ITO thin film, and TEM, XRD and XPS analysis of the MFSS ITO show the nano-crystalline structure. As a result, the MFSS process can effectively prevent to the high energy negative oxygen ions bombardment and supply activation energies by accelerating Ar ions in the plasma; therefore, high quality ITO can be deposited at room temperature.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.175-183
• /
• 2022

The collision between a ship and bridge across a waterway may result in extremely serious consequences that may endanger the safety of life and property. Therefore, factors affecting ship bridge collision must be investigated, and the impact force should be discussed based on various collision conditions. In this study, a finite element model of ship bridge collision is established, and the peak impact force of a ship bridge collision based on 50 operating conditions combined with three input parameters, i.e., ship loading condition, ship speed, and ship bridge collision angle, is calculated via numerical simulation. Using neural network models trained with the numerical simulation results, the prediction model of the peak impact force of ship bridge collision involving an extremely short calculation time on the order of milliseconds is established. The neural network models used in this study are the basic backpropagation neural network model and Elman neural network model, which can manage temporal information. The accuracy of the neural network models is verified using 10 test samples based on the operating conditions. Results of a verification test show that the Elman neural network model performs better than the backpropagation neural network model, with a mean relative error of 4.566% and relative errors of less than 5% in 8 among 10 test cases. The trained neural network can yield a reliable ship bridge collision force instantaneously only when the required parameters are specified and a nonlinear finite element solution process is not required. The proposed model can be used to predict whether a catastrophic collision will occur during ship navigation, and thus hence the safety of crew operating the ship.

• Journal of Integrative Natural Science
• /
• v.4 no.2
• /
• pp.149-157
• /
• 2011

Urbanization of the world's population has given rise to more than 450 cities around the world with populations in excess of 1 million (megacity) and more than 25 so-called metacities with populations over 10 million (Brinkhoff, 2010). The United States today has a total resident population of more than 308,500,000 people, with 81 percent residing in cities and suburbs as of mid - 2005 (UN, 2008). Urban meteorology is the study of the physics, dynamics, and chemistry of the interactions of Earth's atmosphere and the urban built environment, and the provision of meteorological services to the populations and institutions of metropolitan areas. While the details of such services are dependent on the location and the synoptic climatology of each city, there are common themes, such as enhancing quality of life and responding to emergencies. Experience elsewhere (e.g., Shanghai, Helsinki, Tokyo, Seoul, etc.) shows urban meteorological support is a key part of an integrated or multi-hazard warning system that considers the full range of environmental challenges and provides a unified response from municipal leaders. Urban meteorology has come to require much more than observing and forecasting the weather of our cities and metropolitan areas. Forecast improvement as a function of more and better observations of various kinds and as a function of model resolution, larger ensembles, predicted probability distributions; Responses of emergency managers, government officials, and users to improved and probabilistic forecasts; Benefits of improved forecasts in reduction of loss of life, property damage, and other adverse effects. A national initiative to enhance urban meteorological services is a high-priority need for a wide variety of stakeholders, including the general, commerce and industry, and all levels of government. Some of the activities of such an initiative include: conducting basic research and development; prototyping and other activities to enable very--short and short range predictions; supporting and improving productivity and efficiency in commercial and industrial sectors; and urban planning for long term sustainability. In addition urban test-beds are an effective means for developing, testing, and fostering the necessary basic and applied meteorological and socioeconomic research, and transitioning research findings to operations. An extended, multi-year period of continuous effort, punctuated with intensive observing and forecasting periods, is envisioned.

• Journal of Wetlands Research
• /
• v.15 no.3
• /
• pp.423-430
• /
• 2013

An algorithm to allow shoreline movement during numerical experiment on sediment transport, deposition or resuspension for general coastal morphology is proposed here. The bed slope near shoreline, i.e. mean sea level, is influenced by bed material, tidal current, waves, and wave-induced current, but has been reported to remain within a stable range. Its annual variation is not large, either. The algorithm is adjusting the bathymetry, if the largest bed slope within shoreline band exceeds a given bed slope due to continuous erosion at zones below the shoreline. This algorithm automatically describes retreat of shoreline caused by erosion, when used within a numerical system. The algorithm was tested to a situation which includes a continuous dredging at a point, and showed satisfactory development of concentric circle contours. Next, the algorithm was tested to another situation which includes sinking of eroded part of bed plate, and produced satisfactory results, too. Finally, the algorithm was tested to a movable-bed laboratory experimental conditions. The shoreline movement behind detached breakwater was reasonably reproduced with this algorithm.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.2
• /
• pp.77-86
• /
• 2017

Selection of location in food service start-up business is sure to be a shortcut to achievement of business performance, and in this context, it's no exaggeration to say that food service industry is an real estate industry. This study looked into what influence of the location factor in food service start-up business had on sales performance, and intended to verify whether the location factors ultimately influenced business performance consequent on the influence of location factors on start-up business satisfaction. To this end, this study set food service owner-operators as its research subject, and conducted a survey of the operators (of restaurants) located in Anyang-si from December 1, 2016 until January 30, 2017. This study distributed a total of 300 copies of questionnaires, and collected 245 copes, among which this study used 198 copies for empirical study excluding the copies whose reply was unfaithful. This study did empirical analysis of 198 copies using SPSS 22.0 Statistical Package Program, together with the application of frequency analysis, factor analysis and regression analysis. The major results of this study are as follows: First, this study divided the location factors in food service start-up business stores into the four, i.e. accessibility, clustering property, placeness and visibility, etc. Second, the study results showed that accessibility, clustering property, placeness and visibility had significant influence as one in the influence of locational factors on sales performance. Third, this study could understand that start-up business satisfaction had a partial mediated effect in the influence of location factors on sales performance. Resultantly, this study confirmed food service start-up business's own selection of location, and wished to find major factors and a differentiated point in time of selection of location of stores in other fields. Such a result gives an implication that it's necessary to concentrate all efforts to increase sales performance of food service start-up business from the location selection phase, and to make efforts to increase start-up business satisfaction.