• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.363-369
• /
• 2006

In this the study, Lyocell fabrics for blanket were developed to get high value added goods for elder and Infant. Therefore, the purpose of the study was determine the effect of twist per inch on the physical properties of developed fabrics, including compression property and abrasion resistance on the process for making Lyocell combined yarns. For comparison, commonly used cotton blanket was used. The results were as the follows: 1) Dimensional changes of Lyocell fabrics was in -3% which value was pretty stable, and antistatic property was very good with 10V of electric propensity voltage which means there was no static electricity at all. Pilling property of Lyocell fabrics showed 3 grade which was good and air permeability and moisture vapor transmission rate of Lyocell fabrics were higher than those of cotton fabric and keeping warmth rate of Lyocell fabrics was about 50% which means it very warms. 2) Twist per inch of Lyocell combined yarns increased with tensile strength and elongation of Lyocell fabrics. 3) Twist per inch of Lyocell combined yarns increased with decreasing thickness reduction rate and therefore, compression property of those was pretty good. Specially, compression property of Lyocell fabrics made with yarns of 3.9TPI was better than those of cotton fabric. 4) Twist per inch of Lyocell combined yarns increased with abrasion resistance of Lyocell fabrics.

• Journal of Information Science Theory and Practice
• /
• v.4 no.2
• /
• pp.53-65
• /
• 2016

The authors in this paper aim to identify the growth of literature on Intellectual Property Rights (IPRs). The research publications on IPRs were downloaded from the Scopus online citation database and the authors found that there were 1,513,138 records contributed globally over a period of 10 years from 2005 to 2014. The distribution of publications based on the year, country, and document type were studied. Relative growth rate (RGR) of the publications and doubling time (T_d) were calculated. Most productive organizations, source titles, and the productive authors on IPR research were studied. Most cited articles in the study area were identified. The results show that a number of publications under the subjects Medicine and Engineering were produced. The developed countries are very active in IPR research and producing publications. It is found that one institution which holds the sixth place among the top 10 most productive institutions belongs to Brazil, a developing country. Two developing countries such as China and India hold second and tenth positions respectively in the top 10 countries contributing literature on IPRs.

• Journal of Integrative Natural Science
• /
• v.15 no.1
• /
• pp.27-36
• /
• 2022

Metabus, currently represented by Second Life on the Internet, is the next-generation 3DCG Internet world in which the 2D Internet world has evolved, and has grown as a new ICT culture of mankind that can replace real society with virtual society. As such, the reason why the world of metabus has rapidly expanded is that the era of 3D Internet has arrived due to the evolution of the Internet, which only used information, and the spread of 5G communication in user-participating WEB. However, there are many situations in which laws do not exist in this virtual world and various illegal acts occur. As the Internet culture developed earlier, illegal activities by users began to appear, and as the legal responsibility of Internet providers was discussed, mankind quickly passed the Millennium Copyright Act or introduced new copyright protection measures such as technical protection, transmission rights, and rights management information. Therefore, this paper reviews and studies how to accept and further grow this new metabus culture, including the viewpoint of intellectual property.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.439-440
• /
• 2008

An inductive coupler, which feeds communication to the electric power transmission line, is required to establish Power Line Communication(PLC). The electro-magnetic property of magnetic core and design technology for coupler are very important to manufacture an inductive coupler for power transmission line. The magnetic core with superior electro-magnetic property was manufactured by using nano-crystalline alloy and an inductive coupler, which can operate at the maximum 2,000 A current, was designed and manufactured by establishment of current saturation, signal out winding, and electro-magnetic simulation in this study. Communication speed of 14 Mbps in 600 m communication distance of the real electric power transmission line was obtained by using the inductive coupler and application possibility of the inductive coupler for the electric power transmission line was certified.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.7
• /
• pp.350-353
• /
• 2001

In general, the Least Square Error method is used for signal classification to measure distance in the $l^2$ metric or the $L^2$ metric space. A defect of the Least Square Error method is that it does not classify properly some waveforms, which is due to the property of the Least Square Error method: the global analysis. This paper proposes a new linear operator, the Integra-Normalizer, that removes the problem. The Integra-Normalizer possesses excellent property that measures the degree of relative similarity between signals by expanding the functional space with removing the restriction on the functional space inherited by the Least Square Error method. The Integra-Normalizer shows superiority to the Least Square Error method in measuring the relative similarity among one dimensional waveforms.

• Structural Engineering and Mechanics
• /
• v.15 no.5
• /
• pp.535-550
• /
• 2003

In this paper, a boundary-type meshfree method, the boundary radial point interpolation method (BRPIM), is presented for solving boundary value problems of two-dimensional solid mechanics. In the BRPIM, the boundary of a problem domain is represented by a set of properly scattered nodes. A technique is proposed to construct shape functions using radial functions as basis functions. The shape functions so formulated are proven to possess both delta function property and partitions of unity property. Boundary conditions can be easily implemented as in the conventional Boundary Element Method (BEM). The Boundary Integral Equation (BIE) for 2-D elastostatics is discretized using the radial basis point interpolation. Some important parameters on the performance of the BRPIM are investigated thoroughly. Validity and efficiency of the present BRPIM are demonstrated through a number of numerical examples.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.788-789
• /
• 2006

Microstructure and soft magnetic properties of bulk amorphous and/or nanocrystalline $Fe_{73.5}Cu_1Nb_3Si_{13.5}B_9$ alloys prepared by consolidation at 5.5GPa were investigated. The relative density of the bulk sample 1 (from amorphous powders) was 98.5% and the grain sizes were about 10.6nm. While the relative density and grain sizes of bulk sample 2 (from nanocrystalline powders) are 98% and 20.1nm, respectively. Particularly, the bulk samples exhibited a good combined magnetic property: for Sample1, $M_s=125emu/g$ and $H_c=1.5Oe;$ for Sample2, $M_s=129emu/g$ and $H_c=3.3Oe$. The success of synthesizing the nanocrystalline Fe-based bulk alloys will be encouraging for the future development of bulk nanocrystalline soft magnetic alloys.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.670-672
• /
• 1995

This paper deals with the robust two-degree-of-freedom multivariable control system using $H_{2}/H{\infty}$optimization method which can achieve the robust stability and the robust performance, simultaneously. The feedback controller can obtain the robust stability property. The feedforward controller can obtain the robust performance property under modelling error. The robust two-degree-of-freedom multivariable control system is applied to the nonlinear multivariable boiler-turbine system. The validity of the proposed method is verified though being compared with LQG/LTR design method.

• East Asian Economic Review
• /
• v.20 no.2
• /
• pp.191-228
• /
• 2016

This paper analyzes the role of absorptive capacity in R&D spillovers through strategic R&D investments in a game-theoretic framework. In the model, a firm's effective R&D is composed of idiosyncratic R&D, which produces its own innovations, and identical R&D, which improves absorptive capacity. The model shows that in the presence of absorptive capacity firms have a tendency to underinvest (overinvest) in idiosyncratic (identical) R&D relative to the social optimum. As the spillover becomes larger, firms decrease their own R&D while they become more inclined towards strategic exploitation of rivals' efforts. Since the former effect overpowers the latter, the total amount of R&D decreases as the spillover increases. This is socially undesirable, providing a potential justification for a governmental subsidy for idiosyncratic R&D and a tax on identical R&D. The findings may have important implications for newly industrialized or emerging countries that consider a redirection of national R&D policy and intellectual property rights (IPR) regime.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.04a
• /
• pp.1-6
• /
• 2003

In injection molding of an optical disk, a toric lens, etc., their performance depends on the transcription preciseness of fine surface structure of a mold. However, transcription behavior has not been made clear yet, because transcription is made in very short time and the structure is very small. In this paper, transcription properties have been examined, by using V-grooves of various sizes. machined on mold surfaces, and the following results are obtained. (1) Transcription properties have been made clear experimentally and it was found that the mold temperature $T_D$ makes great influence on the transcription property and that compression applying time $t_c$ should be taken more than 2.0s for fine transcription. (2) A mechanical model of transcription process, in consideration with strain recovery due to viscoelastic property of polymer. is proposed. (3) Simulation results agree with experimental ones fairly well. It means that the transcription model is useful for estimation of transcription property in advance of an actual. injection molding.