• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1867-1869
• /
• 2003

In this paper, chamber(Circuit breaker compartment of C-GIS) made of stainless steel with 4 mm width is used. Artificial defect was made on enclosure or HV conductor of chamber and $SF_6$ gas was injected into it according to pressure. In this experiment, Acoustic emission sensors of different types was used to compare sensitivity to detect acoustic signal occurred by Partial discharge(PD) of according to types and resonance frequency in $SF_6$ gas atmosphere. Sensors used in tests was R6I, R15I and 2/4/6 Pre-Amplifier connected with R6IU without pre. amp. In case of R6IU, gain was adjusted with 40 dB like other sensors and operated by differential mode. Post amplifier(post. amp) and band pass filter(BPF) were developed Gain of post. amp. is 60 dB and BPF has band width of $50{\sim}300$ kHz. Also, envelope circuit developed reduces frequency of AE sensor. As a result, in $SF_6$ atmosphere, R6IU and R6I had resonance frequency of 60 Hz was better than R15I. Also, R6IU was better than R6I because of type property of pre.amp. had differential mode.

• Herbal Formula Science
• /
• v.15 no.1
• /
• pp.137-144
• /
• 2007

Background and Objectives : There are three kinds of formulas for purging the spleen to cure its sthenic syndrome based on the types of preparation formulas : Sabeetang, Sabeehwan, Sabeesan and Sabeeeum. Another formulas called Sahwangtang, Sahwangsan. Sahwangeum is to purge the yellow colour of spleen. There are 8 kinds of Sabeetang, 3 kinds of Sabeehwan, 3 kinds of Sabeesan, 1 kind of Sabeeeum, 4 kinds of Sahwangtang, 7 kinds of Sahwangsan, and 1 kind of Sahwangeum. Combination of herbal medicines, carried out in formulas for purging the spleen, consists of various kinds depending on medical scientists' personal experience in medical treatment without any general principles, which makes it difficult to apply it to clinical use. The objectives of this study lie in theoretical establishment of Sabeetang for curing the sthenic syndrome of spleen through analyzing the component medicines and combination principles of Hyeongok's Sabeetang, and furthermore, maximizing the clinical use of Sabeetang. Methods : This study analyzed the component medicines and combination principles of Hyeongok's Sabeetang based on the theory for properties and tastes of herbal medicines from the ${\ulcorner}$Yellow Emperor's Canon of Internal Medicine${\lrcorner}$ , the theory for principal herbal medicine, assistant herbal medicine, adjuvant herbal medicine, dispatcher herbal medicine, and the five elements doctrine. Hyeongok's Sabeetang is an odd prescription, composed of 7 kinds of ingredients : No.1 Rhizoma Coptidis (2don;7.5g), No.2 Fructus Gardeniae (1don;3.75g), No.3 Ramulus Cinnamomi (1don), No.4 Gypsum Fibrosum (1don), No.5 Fructus Aurantii Immaturus (1don), No.6 Cortex Magnoliae Omcinalis (1don), and No.7 Radix Et Rhizoma Rhei (1don) Results : There are three methods for curing the sthenic syndrome of spleen according to the five elements doctrine : purging the spleen, purging the lung and invigorating the liver. First, if you suffer from the sthenic syndrome of the spleen, you need to purge your spleen. There are two available methods, including taste and property purgation according to the theory for properties and tastes of herbal medicines. They each imply the bitter taste and the cool property purge the spleen. In the case of taste purgation, two herbal medicines with bitter taste. Rhizoma Coptidis and Fructus Gardeniae, are combined into the principal and assistant herbal medicine, respectively. For property purgation, three herbal medicines with the cool property, Gypsum Fibrosum, Fructus Aurantii Immaturus and Radix Et Rhizoma Rhei, are combined into adjuvant herbal medicines. Secondly, if you suffer from the sthenic syndrome of the spleen, you need to purge your lung which is child in the mother-child relationship in inter-promotion among the five elements. There are two methods to purge the lung, including taste and property purgation according to the theory for properties and tastes of herbal medicines. They each mean the pungent taste and the warm property purge the lung. Therefore, it is important to use pungent herbal medicines for taste purgation and warm ones for property purgation. Both pungent and warm herb and property invigoration to invigorate the liver with warm property. Therefore, it is important to use pungent herbal medicines for taste invigoration and warm ones for property invigoration. Both pungent and warm herbal medicines, Ramulus Cinnamomi and Cortex Magnoliae Officinalis, were combined to invigorate the liver and purge the lung. In addition, Gypsum Fibrosum are combined as dispatcher herbal medicine, leading all the herbal medicines composing the formula to the spleen. Conclusions : First, to cure the sthenic syndrome of the spleen, the methods of purging the spleen and the lung, and invigorating the liver should be used according to the five elements doctrine. Secondly, herbal medicines appropriate for those treatment methods should be chosen according to the theory for properties and tastes of herbal medicine and thirdly, the combination of those herbal medicines should be carried out according to the theory for principal herbal medicine, assistant herbal medicine, adjuvant herbal medicine, dispatcher herbal medicine. As a good example, Hyeongok's Sabeetang is combined according to the above theories. In conclusion, this formula was created by applying to the theory for properties and tastes of herbal medicines.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.132-135
• /
• 2010

Thermal properties of layered metal chalcogenides such as $WT_2$ (T=S,Se) with two-dimensionally disordered structure were evaluated. Thermal conductivity shows a marked decrease after exfoliation and subsequent restacking because of random stacking of two-dimensional crystalline sheet, which circumvents thermal conduction pathways along longitudinal direction in anisotropic materials.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.89-93
• /
• 1998

In order to enlarge effection use as well as to use as a cheafut raw material for high-strength concrete admixture, we manufactured high strength admixture by using various industrial by-products and then applied to 2nd concrete pro when concrete was added MSS, strength of concrete was promoted and had a excellent property than domestic D admixture. This result could be explained that adding of MSS accelerated the famat of ettringite($C_3A$, $3CaSO_4$, $32H_2O$) like needle crystal in steam curing a also promoted to cement solidification and shorten high pre-strength display. As a result of, strength of concrete added MSS pretented, above 850kgf/$\textrm{cm}^2$ in 7 days of long-period curing.

• Journal of Korea Foundry Society
• /
• v.23 no.5
• /
• pp.286-290
• /
• 2003

본 연구에서는 Ni-Zr-Ti의 3원계 합금을 기본으로 하여, Si 및 Sn 등의 원소를 첨가하여 Ni-rich 영역에서 벌크 비정질 합금을 제조하였다. $Ni_{59}Zr_{20}Ti_{16}Si_2Sn_3$ 조성의 합금에서 injection casting에 의하여 약 58 K의 과냉각액상영역을 가지고 있는 직경 3 mm의 벌크 비정질 시편을 제조하였다. 이러한 우수한 비정질 형성능은 액상온도의 저하로 인해 낮은 온도까지 액상이 쉽게 과냉되기 때문인 것으로 사료된다. $Ni_{59}Zr_{20}Ti_{16}Si_5$ 합금은 두 단계에 걸쳐 결정화가 일어나는 반면, $Ni_{59}Zr_{20}Ti_{16}Si_2Sn_3$ 합금은 단일 단계에 의해 orthorhombic $Ni_{10}{(Zr,Ti)}_7$ 결정상과 cubic NiTi 결정상으로 결정화가 일어난다. 벌크 비정질 $Ni_{59}Zr_{20}Ti_{16}Si_2Sn_3$ 합금의 경우 압충강도는 2.7 GPa, 연신율은 약 2% 정도의 값을 가진다.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.653-656
• /
• 2009

3-Dimensionally ordered macroporous $LiMn_2O_4$ thin film was prepared by a sol-gel and dip coating method on Pt/Ti/$SiO_2$/Si substrate. An opal structure consisting of mono dispersed polystyrene beads (300 nm) was used as a template. After solution containing Mn and Li precursors was coated on the template-deposited substrate, the template and organic materials in the precursors was removed by calcination at 400 ${^{\circ}C}$. And then the 3-dimensional $LiMn_2O_4$ thin film with spinel structure was fabricated by heat treatment at 700 ${^{\circ}C}$. The structural and electrochemical property was investigated by XRD, SEM and charge-discharge cycler.

• Korean Journal of Materials Research
• /
• v.19 no.4
• /
• pp.192-197
• /
• 2009

Carbon nanotubes (CNT) were used as a catalyst support where catalytically active Pd and Pt metal particles decorated the outside of the external CNT walls. In this study, Pd and Pt nanoparticles supported on $HNO_3$-treated CNT were prepared by microwave-assisted heating of the polyol process using $PdCl_2$ and $H_2PtCl_6{\codt}6H_2O$ precursors, respectively, and were then characterized by SEM, TEM, and Raman. Raman spectroscopy showed that the acid treated CNT had a higher intensity ratio of $I_D/I_G$ compared to that of non-treated CNT, indicating the formation of defects or functional groups on CNT after chemical oxidation. Microwave irradiation for total two minutes resulted in the formation of Pd and Pt nanoparticles on the acid treated CNT. The sizes of Pd and Pt nanoparticles were found to be less than 10 nm and 3 nm, respectively. Furthermore, the $SnO_2$ films doped with CNT decorated by Pd and Pt nanoparticles were prepared, and then the $NO_2$ gas response of these sensor films was evaluated under $1{\sim}5\;ppm$ $NO_2$ concentration at $200^{\circ}C$. It was found that the sensing property of the $SnO_2$ film sensor on $NO_2$ gas was greatly improved by the addition of CNT-supported Pd and Pt nanoparticles.

• Journal of Powder Materials
• /
• v.15 no.5
• /
• pp.371-377
• /
• 2008

This paper deals with the phase analysis of $MgB_2$ bulk using spark plasma sintering process after ball milling. Mg and amorphous B powders were used as raw materials, and milled by planetary-mill for 9 hours at argon atmosphere. In order to confirm formation of $MgB_2$ phase, DTA and XRD were used. The milled powders were fabricated to $MgB_2$ bulk at the various temperatures by Spark Plasma Sintering. The fabricated $MgB_2$ bulk was evaluated with XRD, EDS, FE-SEM and PPMS. In the DTA result, reaction on formation of $MgB_2$ phase started at $340^{\circ}C$. This means that ball milling process improves reactivity on formation of $MgB_2$ phase. The $MgB_2$ MgO and FeB phases were characterized from XRD result. MgO and FeB were undesirable phases which affect formation of $MgB_2$ phase, and it's distribution could be confirmed from EDS mapping result. Spark Plasma Sintered sample for 5 min at $700^{\circ}C$ was relatively densified and it's density and transition temperature showing super conducting property were $1.87\;g/cm^3$ and 21K.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.667-685
• /
• 2022

This paper aims to investigate 4D printing materials for soft robots. 4D printing is a targeted evolution of the 3D printed structure in shape, property, and functionality. It is capable of self-assembly, multi-functionality, and self-repair. In addition, it is time-dependent, printer-independent, and predictable. The shape-shifting behaviors considered in 4D printing include folding, bending, twisting, linear or nonlinear expansion/contraction, surface curling, and generating surface topographical features. The shapes can shift from 1D to 1D, 1D to 2D, 2D to 2D, 1D to 3D, 2D to 3D, and 3D to 3D. In the 4D printing auxetic structure, the kinetiX is a cellular-based material design composed of rigid plates and elastic hinges. In pneumatic auxetics based on the kirigami structure, an inverse optimization method for designing and fabricating morphs three-dimensional shapes out of patterns laid out flat. When 4D printing material is molded into a deformable 3D structure, it can be applied to the exoskeleton material of soft robots such as upper and lower limbs, fingers, hands, toes, and feet. Research on 4D printing materials for soft robots is essential in developing smart clothing for healthcare in the textile and fashion industry.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.10-15
• /
• 1999

We have studied a method to design and fabricate the Intermediate Frequency(IF) band pass filter with low shape factor which is used for CDMA base station on the 35°Y-cut X-propagation Quartz substrate. In order to fabricate a device of the low shape factor for the IF SAW filter on this substrate, we employed apodization weighted type interdigital transducer(IDT) as an input and withdrawal weighted type IDT as an output by using impulse modelling method. Also, using the Kaiser-Bessel window function, we have adopted 2200pairs and 1000pairs of input and oueut IDT respectively to minimize the effect of ripple. Furthermore, the width and the space of IDT finger are 3.6 ㎛ and 3.5 ㎛ respectively. Thus, we can have optimal results when the IDT thickness is 6000Å in consideration of the ratio of SAW's wavelength while it's aperture is 2mm for impedance matching. The fabricated SAW filter for CDMA had the property of almost 115.2MHz of a center frequency, less then 1.27MHz of bandwidth, less than 1.3 of shape factor, - l5dB of out band attenuation insertion loss and -45dB of rejection band.