• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.478-485
• /
• 2012

A series of transparent polyimide (PI) nanocomposite films was synthesized from bicyclo(2,2,2)oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (BTDA) and 1,3-bis(3-aminophenoxy)benzene (BAPB) with various organoclay contents via solution intercalation polymerization to poly(amic acid)s, followed by thermal imidization. Varying organoclay loading in a range of 0 to 1.5 wt% produced variations in the optical transparency, morphology, and oxygen barrier property of the hybrids. An optimum oxygen barrier property was observed for the hybrids containing 1.0 wt% Cloisite 30B; these properties were degraded gradually by further increases in the clay content. The PI hybrid films were found to exhibit excellent optical transparency and almost no color. However, the transparency of the hybrid films decreased slightly with increasing organoclay content. Transparent PI hybrid films containing 1.0 wt% Cloisite 30B were stretched equi-biaxially with various stretching ratios in a range of 100-140% to investigate their optical transparency and oxygen permeability in detail; the variations of clay dispersion and morphology were also determined as a function of equi-biaxial stretching ratio. PI hybrid films with ${\geq}120%$ stretching were found to contain homogeneously dispersed clay in the polymer matrix and exfoliated nanocomposites. The highest barrier to oxygen permeation was found at an equi-biaxial stretching ratio of 130%.

• Journal of Powder Materials
• /
• v.22 no.6
• /
• pp.426-431
• /
• 2015

Microstructural examination of the Nb-Si-B alloys at Nb-rich compositions is performed. The Nb-rich corner of the Nb-Si-B system is favorable in that the constituent phases are Nb (ductile and tough phase with high melting temperature) and $T_2$ phase (very hard intermetallic compound with favorable oxidation resistance) which are good combination for high temperature structural materials. The samples containing compositions near Nb-rich corner of the Nb-Si-B ternary system are prepared by spark plasma sintering (SPS) process using $T_2$ and Nb powders. $T_2$ bulk phase is made in arc furnace by melting the Nb slug and the Si-B powder compact. The $T_2$ bulk phase was subsequently ball-milled to powders. SPS is performed at $1300^{\circ}C$ and $1400^{\circ}C$, depending on the composition, under 30 MPa for 600s, to produce disc-shaped specimen with 15 mm in diameter and 3 mm high. Hardness tests (Rockwell A-scale and micro Vickers) are carried out to estimate the mechanical property.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5C
• /
• pp.406-414
• /
• 2005

The necessity for a technique to protect intellectual property of a digital content has been increasing, especially for the image/video contents which are the most favorite because of their high information-intensive property. According to this demand, this paper proposed a digital watermarking algorithm, which is recognized as the most promising technique. This algorithm targets MPEG compression system and the watermarking process is to be performed during the compression process. It inserts watermark only in Y components of I-frames. Experimental results showed that the proposed method satisfied both imperceptibility and robustness against various attacks. The PSNR difference between the compressed images(the average compression ratio was about 27:1 with Y:Cb:Cr=4:2:0 color format for TM5-based compression) with and without watermarking was only 1.8dB ($4.2\%$). In each case that the resulting image after an attack was reusable the normalized correlation between the extracted watermark and the original one was above 0.8.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.2
• /
• pp.31-38
• /
• 2018

This study was conducted to investigate the possibility of biochar as an alternative medium to peatmoss using for Aster spathulifolius. We cultivated A. spathulifolius in four potting media with different mixing rates (v/v) of peatmoss (P) and biochar (B) as follows: B0+P3, B1+P2, B2+P1, and B3+P0 with vermiculite 3 + perlite 3. Also, we analyzed the chemical properties of media and the plant growth characteristics. The results were as follows: In case of media's chemical condition, B0+P3 and B1+P2 treatments showed higher tendency (p < 0.05). Plant height on B0+P3 and B1+P2 treatments was much higher than that on other treatments (p < 0.05). Root length on B1+P2 treatment was higher than on B0+P3 treatment (p < 0.05). B0+P3 and B1+P2 treatments showed higher number of leaves and dry biomass than other treatments. Therefore, our results support that Biochar : Peatmoss : Vermiculite : Perlite (1/3 : 2/3 : 1 : 1, v/v) could be a more economical potting medium for A. spathulifolius than peatmoss : vermiculite : perlite (1 : 1 : 1, v/v).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.2
• /
• pp.275-284
• /
• 1997

Thermodynamic behavior of a composite system which is composed of two simple thermal subsystems with constant heat capacities is analyzed, and several thermodynamic phenomena are investigated. The changes of the states and the potential work of the composite system are shown as the interaction between the subsystems in the composite system. The potential work is defined as the possible maximum available work from the composite system, and it is a thermodynamic property of the composite system. The decrease of the potential work is the same as the available work output from the composite system in reversible processes. The dissipation of available work is directly connected to the generation of entropy. The concepts of exergy and internal energy can be explained as a special case of the potential work.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.492-493
• /
• 2006

송전 철탑의 도장 도료의 성능 평가는 부착강도시험, 염수분무시험, 내후성시험을 실시하고 있으며, 본 연구에서는 새로운 도장성능 방법인 교류임피던스를 측정하여 철탑 도장 도료의 특성을 평가하였다. 그 결과 우레탄계 2회 도장은 침지 초기와 침지 6일 후 임피던스가 $10^{10}[{\Omega}]$으로 양호한 특성을 보였지만 새롭게 개발된 실록산계 1회 도장은 6일 침지 후 $10^7[{\Omega}]$으로 낮아서 부식방식용 도장 도료로써의 특성은 낮았다. 따라서 철탑 도장 도료는 2회 도장을 실시하는 것이 타당한 것으로 사료된다.

• Computers and Concrete
• /
• v.6 no.2
• /
• pp.155-165
• /
• 2009

Splitting tensile strength (STS) of high-performance concrete (HPC) is one of the important mechanical properties for structural design. This property is related to compressive strength (CS), water/binder (W/B) ratio and concrete age. This paper presents a clustering-based fuzzy model for the prediction of STS based on the CS and (W/B) at a fixed age (28 days). The data driven fuzzy model consists of three main steps: fuzzy clustering, inference system, and prediction. The system can be analyzed directly by the model from measured data. The performance evaluations showed that the fuzzy model is more accurate than the other prediction models concerned.

• The Pure and Applied Mathematics
• /
• v.24 no.2
• /
• pp.79-98
• /
• 2017

We establish a coupled coincidence point theorem for generalized compatible pair of mappings $F,G:X{\times}X{\rightarrow}X$ under generalized symmetric Meir-Keeler contraction on a partially ordered metric space. We also deduce certain coupled fixed point results without mixed monotone property of $F:X{\times}X{\rightarrow}X$. An example supporting to our result has also been cited. As an application the solution of integral equations are obtain here to illustrate the usability of the obtained results. We improve, extend and generalize several known results.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4E
• /
• pp.35-40
• /
• 1998

In this paper, an efficient quantization method of line spectrum pairs(LSP) with cascaded structure of vector quantizer and scalar quantizer is proposed. First, input LSP parameters is vector-quantized using a codebook a with a moderate number of entries. In the second stage of quantization, the components of residual vector are individually quantized by the scalar quantizer. The utilization of ordering property of LSP parameters and the inclusion of interframe prediction improve the quantizer performance and remove the stability check routine after quantization procedure. The new vector-scalar hybrid quantizer using 26 bits/frame shows a transparent quality of speech that an average spectral distortion is 1 dB and the frame proportion with above 2 dB spectral distortion is less than 2%. The performances of proposed quantization method is evaluated in the transmission errors.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.605-615
• /
• 1996

Laminar flows in which mixing and chemical reactions take place between parallel streams of reactive species are studied numerically. The governing equations for laminar flows are from two-dimensional compressible boundary-layer equations. The chemistry is a finite rate single step irreversible reaction with Arrhenius kinetics. Ignition, premixed flame, and diffusion flame regimes are found to exist in the laminar reacting mixing layer at high activation energy. At high Mach numbers, ignition occurs earlier due to the higher temperatures in the unburnt gas. In diffusion regimes, property variations affect the laminar profiles considerably and need to be included when there are large temperature differences. The maximum temperature of a laminar reacting mixing layer is almost linear with the adiabatic flame temperature at low heat release, but only weakly at high heat release.