• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.6-15
• /
• 1973

In an attempt to develop composite flours based on raw materials available in Korea, six domestic resources were investigated with respect to their physical and chemical properties, nutritive value and economy. The results are summarized as follows: 1) Flours from naked barley, sweet potato, potato, corn, defatted rice bran and defatted soybean were compared in respect of their proximate composition, thiamine content and protein score. 2) In color comparison, naked barley and defatted soy flours were comparable to wheat flour whereas corn and sweet potato flours were a little inferior. In raising power, naked barley and defatted soy flours were similar to wheat flour and others were inferior. 3) In maximum viscosity of flours by amylograph, naked barley, corn and potato flours were higher than wheat flour and others were lower. In viscosity in cooling, corn flour was similar to wheat flour and naked barley and potato flours were lower. Addition of $10{\sim}20%$ defatted soy flour into other flours generally caused the lowering of viscosity. Addition of emulsifiers such as glyceryl monostearate, calcium stearyl lactylate, Methocel and Emulthin into the flours manifested different effects on the amylogram. 4) In nutritional test by rat, diets consisting of naked barley, sweet potato, potato or corn flours, each containing defatted soy flour (at 10% level with exception of 20% for sweet potato flour) and naked barley flour fortified with lysine were similar to wheat flour in digestibility, but were superior in NPU and biological value. 5) In price estimation, sweet potato and corn flours were competitive with wheat flour, but naked barley flour was a little expensive. On the other hand, barley and sweet potato are promising in terms of domestic production.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.900-904
• /
• 2004

Effects of gamma irradiation on brown rice quality were evaluated. Brown rice was irradiated at absorbed dose of 1, 3 or 5 kGy, and ground. Water uptake, pasting properties, and physicochemical characteristics of flour samples were tested. Water uptake rates of irradiated samples were higher than that of control, and were dose-dependent. Hydration capacity decreased in sample irradiated at 5 kGy due to leaching out of soluble compounds, whereas no differences were observed among other irradiated samples and control. Irradiation significantly decreased pasting properties as determined by amylograph. Gamma irradiation accelerated water evaporation at high temperatures (over $300^{\circ}C$) in test of weight-loss profile with thermogravimetric analyzer.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.2
• /
• pp.147-153
• /
• 2010

Sulgidduk samples containing 1, 2, and 4% Adenophora remotiflora powder and a control were examined for moisture content, gelatinization property, color, textural characteristics, and sensory qualities to determine the optimal ratio of Adenophora remotiflora powder in the formulation. The highest viscosity, lowest viscosity, final viscosity, setback and breakdown decreased as the contents of Adenophora remotiflora powder increased in the gelatinization property of flour blends of rice cake made with Adenophora remotiflora powder. The water content of rice cake with Adenophora remotiflora powder was 40.54~41.30% and there was no significant difference between samples with Adenophora remotiflora powder. L values indicating brightness were highest in the control group and all of the a values displayed green color indicating that they were negative. The b values were lowest in the control group and the values increased as the level of Adenophora remotiflora powder increased. Evaluation of the mechanical characteristics of rice cake with Adenophora remotiflora powder, hardness, cohesion, adhesion and chewiness were all higher in the control group and as its contents were rich, such properties were reduced. In addition, there was no significant difference between adhesion and chewiness. Adhesion and elasticity were low in the control group and as its contents were rich, such properties increased. The results of the sensory test revealed that the, control group containing 1% Adenophora remotiflora powder had the highest color, flavor, taste and overall preference.

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.470-475
• /
• 1988

The extrusion-cooking method was used to make gelatinized rice extrudate from rice grits of the Chuchung and the Samgang varieties. The water contents of raw rice grits varied from 15% to 25%, and the physicochemical properties of extrudates were evaluated. Low moisture content showed high expansion ratio in rice extrudate and resulted in some decrease in gelatinization, bulk density and break strength. Increasing the water content to 25% resulted in increase in water absoption index but decrease in water solubility index. With regards to Brabender Amylograph values and rheological patterns, higher moisture content in raw materials revealed stronger pseudoplastic flow behavior with lower viscogram property. Hunter's color values of rice flours extruded at low water content were low in b values. Scanning electron microscopy demonstrated the break-down of starch granules during extrusion.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.2
• /
• pp.234-242
• /
• 1987

Rough rice samples of four rice varieties were collected from twenty five locations through the country just after 1986 rice growing season. Various characteristics related to rice grain quality were observed to clarify the degree of locational variation of physico-chemical properties, and cooking and eating quality of rice grains. Grain weight, grain shape, degree of translucency and chalkiness of rice grain, amylogram properties of rice flour, water uptake during cooking, and cooked rice appearance were different between varieties tested. High degree of locational variation were found in following characteristics, degree of translucency and chalkiness of rice grain, water uptake during cooking, cooked rice appearance and amylogram properties. Eating quality of cooked rice indicated by sensory score showed different tendency of locational variation between rice varie-ties tested, and locations produced rice grains showing better eating quality were not coinside with among varieties tested. Grain weight, degree of translucency and chalkiness of rice grain, and cooked rice appearance of rice samples showing better eating quality were quite different to rice grains showing poor eating quality. Rice having better eating quality of a japonica variety, Chucheong, showed higher value of peak and final viscosity, viscosity after cooling, consistency and set back on amylograph compared with those of poor eating quality rices, and break down value of better rice was lower than that of poor rice. However, a Tongil type variety, Taebaek, did not show any consistent difference between better and poor rices. Rice samples from six locations in Chucheong and four locations in Taebaek showed special properties on amylogram compared with other rices collected in this study.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.83-91
• /
• 2018

Baekseolgi made with arrowroot flour (AF, 0 to 15% of rice flour) was steamed to examine the effect of heating on its antioxidant activity and physicochemical properties. Despite the presence of abundant dietary fiber and superior water-holding capacity of AF, moisture in baekseolgi was not significantly increased. This could partly be attributed to AF having 50% less moisture content than rice flour. Hence, hardness of baekseolgi was also not significantly altered. Total reducing capacity and flavonoid content of baekseolgi increased proportionally with the increase in AF addition. However, these values were lower than the predicted values calculated from the antioxidant activities of heated AF, which was more apparent in total reducing capacity. This indicated that the stability of non-phenolic reducing compounds in AF was lower than that of the phenolic compounds. Thermally processed baekseolgi made with 9% AF exhibited antioxidant activity without noticeable loss in the quality of the product.

• Culinary science and hospitality research
• /
• v.21 no.6
• /
• pp.218-228
• /
• 2015

In this study, the physicochemical characteristics of rice sourdough fermented with Omija extract were investigated. Rice sourdough was made with a 3 stage fermentation process. pH & total titratable acidity, numbers of yeast and lactic acid bacteria, and dough expansion rate were measured. In addition, an RVA was employed to study the pasting properties of rice sourdough. There was a significant (p<0.05) change in both the pH of rice sourdough, which decreased from 5.08 to 3.98, and total titratable acidity, which increased from 0.20 to 0.57 (0.1N NaOH mL), as fermentation time increased. The amount of yeast and lactic acid bacteria significantly increased from 6.73 to 7.65 log CFU/g, 6.93 to 7.65 log CFU/g, respectively(p<0.05). The expansion rate of rice sourdough fermented with Omija extract was higher than rice sourdough fermented without Omija extract. The initial pasting temperatures of rice sourdough fermented with Omija extract were decreased from $91.3^{\circ}C$ to 85.6. The final viscosity and setbacks decreased as fermentation time increased. These results suggest that Omija extract has a beneficial effect on increasing the expansion rate of rice sourdough as a substitute for wheat flour.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.7
• /
• pp.900-907
• /
• 2008

The physicochemical properties of black rice flours produced from dry and wet milling were carried out to investigate their applications in food processing industry. The dry milled black rice flours showed lower fat, protein, ash, and anthocyanin contents than those of wet milled black rice flours with no effect due to number of millings. Average particle sizes ($379{\sim}288\;{\mu}m$) of dry milled flours were bigger than those ($336{\sim}253\;{\mu}m$) of wet milled flours. Particles with 60 mesh or more increased with increasing milling times. Wet milled flours had higher damaged starch, water solubility index (WSI), and water absorption index (WAI) compared to dry milled flours. Pasting properties measured by rapid visco analyzer (RVA) resulted in higher pasting temperatures in dry milled flours ($62.5{\sim}69.4^{\circ}C$) than wet milled flours ($46.1{\sim}46.4^{\circ}C$). As the number of milling times increased, pasting temperature of wet milled flours were not effected. Dry and wet milling resulted in reduced trough, final viscosity, and consistency with increasing milling times.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.127-134
• /
• 2010

This study was to develop high-nutritious energy bar from extruded hemp obtained by extrusion process. Mixture of rice flour and defatted hemp was extruded at a barrel temperature of 110 and 130$^{\circ}C$, and moisture content of 20 and 25%. Properties of extrudates such as bulk density, expansion index, breaking strength, apparent elastic modulus, water absorption index (WAI), water solubility index (WSI) have been analyzed. The antioxidant potential was determined by the DPPH-radical scavenging assay. The expansion index was the highest in rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content among the other hemp-added extrudates. The WAI was increased with increase in moisture content, while the WSI was increased with increase in barrel temperature. The peak viscosity of rice extrudate had higher valule than those of extrudate added with hemp. DPPH scavenging activity of rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content showed the highest value. Sensory properties, moisture content and color were assessed for quality of energy bar. The color values of the energy bar indicated decreasing L (lightness) and b (yellowness), and increasing a (redness) after 30 days storage at ambient condition. The highest overall acceptable was the energy bar added with rice-hemp extrudate at 130$^{\circ}C$ barrel temperature and 20% moisture content.

• The Korean Journal of Mycology
• /
• v.26 no.2 s.85
• /
• pp.194-199
• /
• 1998

Pholiota sp. were collected from the forest of Kangwon province (Mt. Samak, Mt. Odae and Kangwon National University Forest Experimentation) from the early of August to the end of October 1997. Among these fungi, Poliota adiposa was selected for culture experiment because it is suitable for edible mushroom. The Optimal temperature for the mycelial growth of Pholiota adiposa was in the range of $28^{\circ}C$ while that of fruit body formation was $15{\pm}1^{\circ}C$. Brown sugar as carbon source and soybean flour as nitrogen source were good for mycelial growth in commercial liquid culture. The fruit bodies of Pholiota adiposa were artifitially produced on plastic bottle including poplar sawdust and rice bran (4:1).