• 제목/요약/키워드: proper technique

검색결과 1,254건 처리시간 0.029초

On the Validity of SN Ratio in Parameter Design

  • Kim, Sang-Ik
    • 품질경영학회지
    • /
    • 제21권1호
    • /
    • pp.96-107
    • /
    • 1993
  • In parameter design Taguchi analyzed a statistic which he called signal-to-noise(SN) ratio by using the experimental design technique. However he gave no justification for using SN ratios in the optimization procedure of parameter design. In this paper we discuss the validity of such SN ratios as proper statistics to be analyzed in parameter design. Moreover, using the real empirical data we examine the appropriateness of SN ratios, and we explain how transformation technique can be applied in parameter design as an alternative method of analysis.

  • PDF

모드분해기법을 이용한 현수교의 변위응답추정 (Estimation of displacement responses of a suspension bridge by using mode decomposition technique)

  • 장성진;김남식;김호경
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.320-325
    • /
    • 2009
  • In this study, a method to estimate the suspension bridge deflection is developed using mode decomposition technique. In order to examine the suspension bridge stability against these dynamic loadings, the prediction of displacement response is very important to evaluate bridge stability. However, it is recognized that any measurement of movement for suspension bridges may be difficult for the absence of proper methods to measure the displacement response on site. This study aims at suggesting a method to estimate the displacement response from the measured strain signals in an indirect way to predict the displacement response, not a direct way to measure the displacement response. Additionally, by applying the FBG sensors with multi-point measurements not influenced by electric noise, it can be expected that the technique would be applicable to infrastructures.

  • PDF

Field Inspection of Phase-Array Ultrasonic for PolyEthylene Electrofusion Joints

  • Kil, Seong-Hee;Jo, Young-Do;Yoon, Kee-Bong
    • 한국가스학회지
    • /
    • 제16권1호
    • /
    • pp.22-25
    • /
    • 2012
  • Welding and/or fusion in polyethylene(PE) system made on site is focused on the control of the welding or fusion process to follow proper procedure. The process control is important, but it is not sufficient for the long term reliability of a pipe system. To achieve the rate of failure close to zero, Non Destructive Testing(NDT) is necessary in addition to joining process control. For electrofusion joints several non-destructive testing methods are available. The ultrasonic phased array technique is possible to detect various defects including wire deviations and regions with lack of fusion. In this studies, testing was carried to detect the defect after electrofusion joining of polyethylene piping is utilized by the ultrasonic phased array technique. From testing data, ultrasonic phased array technique is recommended as a reliable non-destructive testing method.

컴포넌트 기반 애플리케이션 개발 CASE 도구에서의 웹 서비스 활용 방안 (A Technique for the Use of Web Service in CASE Tool for the Component based Application Development)

  • 김영희;김주일;이우진;정기원
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2004년도 추계학술발표논문집(상)
    • /
    • pp.409-412
    • /
    • 2004
  • The technique and process for the acquisition of components by searching and testing the reusable components using Web Service in the CASE tools for component-based application development are proposed. The technique and process for the notice of components using Web Service in order to reuse developed components are also proposed. As using the technique and process, a repository does not need to construct and the reusability of components will rise because components are easily and efficiently searched using Web Service. Furthermore, it is easy to develop application through the plug-and-play of components which are acquired using Web Service, and errors of application by reused components will be minimized because proper components are acquired after pretesting reusable components in the analysis and the architecture phase.

  • PDF

스트레스 관리 시 호흡치료의 이론적 근거와 기법 적용 (Theoretical Bases and Technical Application of Breathing Therapy in Stress Management)

  • 이평숙
    • 대한간호학회지
    • /
    • 제29권6호
    • /
    • pp.1304-1313
    • /
    • 1999
  • Breathing is essential for life and at the same time takes a role as a antidote for stress. In the Orient, it was recognized early that respiration, mind, and body have a relation that is inseparable and therefore proper breathing is so important. However, since the mechanism of therapeutic effect by breathing have not been verified, the treatment has been continued till recent years. From that which originated in the Orient, several techniques in the west have been developed to regulate breathing, and have been applying to the clinical situation and to studies, however scientific studies are still lacking. Recently, relaxed breathing has been used as an efficient strategy for breathing therapy as it has an effect on reducing physiological tension and arousal, and, therefore can be used as a basic technique to control or manage stress. In this study, in order to provide basic information and guidelines for clinical application, which will aid in the application of the theoretical basics of breathing therapy and its technique, a review of the literative was conducted. The findings are as follows: 1. Since proper breathing not only has, physically, the important function in supplying oxygen to the body but also gives a good emotional, or pleasant state of mind, it is the first step in controlling physical and mental health. 2. The basic types of breathing can be classified into two types; ‘diaphragmatic breathing(relaxed breathing)’ and ‘chest breathing(stress breathing)’. In yoga type breathing, there are four kinds of breathing, ‘upper breathing’, ‘mid breathing’, ‘down breathing’, and ‘complete breathing’. 3. The theoretical explanation of the positive thera peutic effect of breathing therapy techniques exemplifies good brain function, sufficient air flow through the nasal passages, diaphragmatic movement, light vagal stimulation, CO2 changes and cognitive diversion but in most studies, the hypothesis of CO2 is supported. 4. The technique of breathing is designated with many names according to the muscles and techniques used for breathing, and for control of stress, diaphragmatic breathing(relaxed breathing) is explained as a basic technique best used to manage of stress. 5. The relaxed-breathing includes slow diaphragmatic breathing, breath meditation, nasal breathing, yogic abdominal breathing, Benson's relaxed response, and quiet response.

  • PDF

연소안정성 평가시험 기법을 위한 펄스건 압력파 유도장치 개발 실험 (Experiments on Development A Pulse-Gun Pressure-Wave Inducing Device for Stability Rating Test Technique)

  • 이광진;김홍집;서성현;문일윤;김형모;이수용;고영성
    • 한국항공우주학회지
    • /
    • 제33권3호
    • /
    • pp.99-106
    • /
    • 2005
  • 액체로켓엔진 개발에서 필수 단계인 연소안정성 확인을 위한 연소안정성 평가시험(stability rating test) 방법의 개발을 위해서는 압력교란장치의 특성과 더불어 안전한 연소시험 절차(sequence)의 확립이 필수적이다. 따라서 본 연구에서는 연소안정성 평가시험을 위해 개발된 펄스건을 액체로켓엔진의 연소시험에 실제로 적용하기 위한 단계로서, 적절한 연소 시험 절차를 개발/검증하고자 하였다. 먼저 펄스건을 실제로 연소실 외벽에 장착하게 되는 압력파 유도장치를 설계하고, 펄스건의 오작동을 방지하기 위한 압력파 유도장치 내부의 냉각시스템의 설계 및 시험을 수행하였다. 이러한 일련의 연소시험 단계를 통하여 실물형 액체로켓엔진에서의 연소안정성 평가시험이 가능한 적절한 시험 단계를 국내 독자적으로 개발하는데 성공하였다.

Effects of Surface Machining by a Lathe on Microstructure of Near Surface Layer and Corrosion Behavior of SA182 Grade 304 Stainless Steel in Simulated Primary Water

  • Zhang, Zhiming;Wang, Jianqiu;Han, En-hou;Ke, Wei
    • Corrosion Science and Technology
    • /
    • 제18권1호
    • /
    • pp.1-7
    • /
    • 2019
  • To find proper lathe machining parameters for SA182 Grade 304 stainless steel (SS), six kinds of samples with different machining surface states were prepared using a lathe. Surface morphologies and microstructures of near surface deformed layers on different samples were analysed. Surface morphologies and chemical composition of oxide films formed on different samples in simulated primary water with $100{\mu}g/L\;O_2$ at $310^{\circ}C$ were characterized. Results showed that surface roughness was mainly affected by lathe feed. Surface machining caused grain refinement at the top layer. A severely deformed layer with different thicknesses formed on all samples. In addition to high defect density caused by surface deformation, phase transformation, residual stress, and strain also affected the oxidation behaviour of SA182 Grade 304 SS in the test solution. Machining parameters used for # 4 (feed, 0.15 mm/r; back engagement, 2 mm; cutting speed, 114.86 m/min) and # 6 (feed,0.20 mm/r; back engagement, 1 mm; cutting speed, 73.01 m/min) samples were found to be proper for lathe machining of SA182 Grade 304 SS.

이택후 서체중용론의 정치사상적 함의와 기술철학적 토대

  • 황종원
    • 중국학논총
    • /
    • 제61호
    • /
    • pp.341-363
    • /
    • 2019
  • 作者在本文中主要探讨了李泽厚的"西体中用"论所具有的政治思想含义以及支撑它的"度"本体论的技术哲学意义. "西体中用"论在政治思想上主要反对教条主义的马克思列宁主义和儒学复兴论, 他认为现代化基本上是西化, 在这一点上, 更接近于全盘西化论. 但他又认为马克思主义與儒学在现代化的历程中可以发挥出积极的作用, 这一点则与全盘西化论不同. 论"西体"时, 李澤厚强调合乎大工业生产的生产力與科技. 论"中用"时, 他认为生活方式的现代化可以消除过去社会主义社会和儒家文化的不合理因素, 但還认为我們可以用马克思主义和儒学中的合理思想来克服现代社会的各种弊病. 另外, 2000年以后, 李澤厚還提出了"度"本体論. 論它時, 一方面他强调工商性劳动, 为人服务的技术, 数学, 逻辑, 理性等. 这是"西体"论的基础. 另一方面, 他把传统中庸概念重新解为工业技术使用恰当, 却批評现代大工业技术不是"恰到好處"的技术. 这是"中用论"的哲学基础. 总之, "西体中用"论揭示了中国现代化的正确方向, "度"本体论在技术哲学上也较好地支持了這一社会理论. 可惜的是, 他未能找到现代社会的种种弊病产生的"体"上的原因, 因此也未能探索新的"体".

Jammer Identification Technique based on a Template Matching Method

  • Jin, Mi Hyun;Yeo, Sang-Rae;Choi, Heon Ho;Park, Chansik;Lee, Sang Jeong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제3권2호
    • /
    • pp.45-51
    • /
    • 2014
  • GNSS has the disadvantage of being vulnerable to jamming, and thus, the necessity of jamming countermeasure techniques has gradually increased. Jamming countermeasure techniques can be divided into an anti-jamming technique and a jammer localization technique. Depending on the type of a jammer, applicable techniques and performance vary significantly. Using an appropriate jamming countermeasure technique, the effect of jamming on a GNSS receiver can be attenuated, and prompt action is enabled when estimating the location of a jammer. However, if an inappropriate jamming countermeasure technique is used, a GNSS receiver may not operate in the worst case. Therefore, jammer identification is a technique that is essential for proper action. In this study, a technique that identifies a jammer based on template matching was proposed. For template matching, analysis of a received jamming signal is required; and the signal analysis was performed using a spectral correlation function. Based on a simulation, it was shown that the proposed identification of jamming signals was possible at various JNR.