• 복식문화연구
• /
• 제23권5호
• /
• pp.835-845
• /
• 2015

This study aims to suggest the proper ease for slim-fit jackets according to the number of buttons from a one-button jacket to four-button jackets for men in their 30's. The researchers carried out both an appearance evaluation and movement functionality evaluation. The results are as follows: When conducting the appearance evaluations, meaningful differences were found. The one-button jacket showed high scores for the 7.5 cm ease. The two-button jacket and the three-button jacket showed high scores for the 10.5 cm ease. The four-button jacket showed a high score for the 13.5 cm ease. Next, the results of the movement functionality evaluation showed the same trend; as the ease was increased from 7.5 cm to 13.5 cm, the scores increased. This is because if the garments offer more ease, this gives room for actions. Additionally, it showed that if there were fewer jacket buttons, then the results showed a high score. The researchers believe that if the number of jacket buttons is lower, then the area of the V-zone increases, so that there is more room for movement. The study suggests a proper chest ease of 7.5 cm for the one-button jacket, 10.5 cm for the two-button jacket and three-button jacket, and 13.5 cm for the four-button jacket, respectively.

• Spatial Information Research
• /
• 제12권1호
• /
• pp.89-100
• /
• 2004

최근 급속한 도시의 팽창과 산업의 발전으로 인하여 가스시설이 급속히 확대됨에 따라 많은 도시가스업체에서는 가스관망 시설정보를 전산화하여 최신의 현황을 유지할 수 있는 가스시설물관리시스템을 개발하여 사용하고 있는 실정이다. 이러한 시스템에서는 가스시설물의 현황파악 및 유지관리를 위한 기본적인 정보만을 제공하고 가스 누출사고시 정확한 사태의 파악과 신속한 대책를 위한 제반 의사결정의 지원은 어려운 실정이다. 본 연구에서는 가스사고의 발생시 신속하고 체계적인 사고 대처를 위한 적용알고리즘의 정립을 통한 가스사고관리시스템을 구현하였다. 본 시스템에서는 1ㆍ2차 차단밸브의 산정을 통하여 가스 누출사고의 발생시 사고 관거의 파악과 함께 가스공급 중단 대상 관로의 파악과 밸브의 현황, 나아가 피해 수용가에 대한 현황 파악이 신속히 이루어 질 수 있도록 하였다. 이러한 가스사고관리시스템의 개발을 통하여 사고 발생시 신속한 대처방안을 고려하여 피해를 최소화 할 수 있다. 나아가 이러한 시스템의 활용을 통하여 가스업체의 업무 효율화에 기여하고 국민의 생명과 재산 보호에 기여도가 크리라 판단된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.364-367
• /
• 2007

Typical seamless tube production methods are an extrusion and a rotary tube piercing. The rotary piercing process is more competitive than the extrusion process form view point of productivity, quality, and flexibility. It consists of twin rolling mills, a pair of disc or flat guides, and a plug. Twin rolling mills are skewed with proper angles in two directions. A round billet is progressively fed forward and rotated due to the rotation of twin rolling mills. Internal crack initiation and growth at central area of the billet are gradually progress because of the repeating actions of tension and rotation. Design variables in the rotary piercing rolling process are the feed angle, the cross angle, the reduction ratio, and the position of plug. In this work, a rotary tube piercing machine was developed and parametric studies on design variables were carried out using finite element analysis. The Brozzo ductile fracture criterion was utilized to determine an internal crack initiation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2164-2168
• /
• 2003

Real time control system such as in factory automation fields, defense field, aerospace, railway industries, financial trading and so forth, includes multiple computers on multiple nodes, and share data to process various actions and functions. This is similar to multitasking in a multiprocessor computer system. The task processing efficiency of such system is proportionally increased by process speed of each process computer. And also it is greatly influenced by communication latencies of each node. To provide proper operation of such real time system, a network that can guarantee deterministic exchange of certain amount of data within a limited time is required. Such network is called as a real time network. As for modern distributed control system, the timeliness of data exchange gives important factor for the dynamics of entire control system. In a real time network system, exchanged data are determined by off-line design process to provide the timeliness of data. In other word, designer of network makes up a network data table that describes the specification of data exchanged between control equipments. And by this off-line design result, the network data are exchanged by predetermined schedule. First, this paper explains international standard real time network TCN (Train Communication Network) applied to the KHST (Korean High Speed Train) project. And then it explains the computer program developed for design tool of network data table of TCN.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권6호
• /
• pp.475-484
• /
• 2020

This study investigates determinants of talent retention in textile and garment companies located in Vietnam's Binh Duong province to propose feasible actions for their sustainable development in the current context of competition on the labor market. This study uses self-completed questionnaires to collect data which are then analysed with statistical methods including scale reliability, exploratory factor analysis, and multiple linear regression. Specifically, results from an official survey of 129 people who are regarded as talents in related companies show that there are ten determinants, ranked in descending order of their importance, including: working environment; training and promotion opportunities; salary and benefits; personal loyalty; relationship with colleagues; nature of work; organizational recognition; type of ownership; relationship with superiors; and working experience. Moreover, it is also found that foreign companies are better in retaining their talents than private domestic ones. These findings suggest that, depending on their available resources, organizations need to focus on some of these factors to improve their talent retention; among them, it is critical to provide creative space or create conductive working environment by providing talents with proper tools and equipment for them to feel excited with their work and get things done in an optimal, efficient and effective manner.

• Steel and Composite Structures
• /
• 제36권4호
• /
• pp.427-446
• /
• 2020

This paper carries out the progressive collapse analysis of stainless steel composite beam-to-column joint sub-models and moment-resisting frames under column removal scenarios. The static flexural response of composite joint sub-models with damaged columns was initially explored via finite element methods, which was validated by independent experimental results and discussed in terms of moment-rotation relationships, plastic hinge behaviour and catenary actions. Simplified finite element methods were then proposed and applied to the frame analysis which aimed to elaborate the progressive collapse response at the frame level. Nonlinear static and dynamic analysis were employed to evaluate the dynamic increase factor (DIF) for stainless steel composite frames. The results suggest that the catenary action effect plays an important role in preventing the damaged structure from dramatic collapse. The beam-to-column joints could be critical components that influence the capacity of composite frames and dominate the determination of dynamic increase factor. The current design guidance is non-conservative to provide proper DIF for stainless steel composite frames, and thus new DIF curves are expected to be proposed.

• Preventive Nutrition and Food Science
• /
• 제3권3호
• /
• pp.295-301
• /
• 1998

Potential applications of irradiation technology inpostharvest handling of agricultural products have been documented over the past five decades. The biological effects of ionizing radiation on food were demonstrated to have the potential both of reducing the storage losses by controlling spoilage microoraganisms, insects, to have the potential both of reducing the storge losses by controlling spoiliage microorganisms, insects, sprouting and ripening, and of improving the hygienic quality of raw and processed products. Food irradiation is recognized as a physical and cold process using gamma-rays from radioisotope sources and electron-beam from the accelerator. As one of the technologies or techniques for preserving and improving the safety of food, irradiated technology has been approved in some 40 countries for more than 200 individeual items of foods and of these about 30 countries including Korea are commerically utilizing this technology. Although limited quantities of irradiated foods are available in the market now, the proper uses of this renewed technology will offer great possibilities not only for increasing the availability of postharvest agricultural products, thereby contributing to price stabilization in the off-season, but also for reducing reliance on chemicals used for sanitary and quarantine requirements. This paper deals with biological actions of ionizing radiation and its potential applications in the agri-food industry from the international point of view.

• 한국가금학회지
• /
• 제26권1호
• /
• pp.1-25
• /
• 1999

Concerns about meat quality, including chicken meat, for the human diet has led to many attempts to manipulate the carcass fat and increase the eating quality. For actual eating quality, the birds must be grown and finished in a manner that results in meat that are tender, succulent and of good flavor, as well as being free from any foreign taint, flavor or safety hazard. Tenderization treatment with high voltage(820V) electrical stimulation and prechill muscle tensioning would improve the tenderness of chicken meat. Proper programs for the withdrawal of feed and water require a team approach for maximizing yield of meat and minimizing carcass contamination. Also effding of supplemental levels of-tocopherol to poultry with vegetable or fish oils increases of desirable polyunsaturated fatty acid(PUFA) content and stablizes the meat against rancidity and fish off-flavors. The nutritional effects of varying dietary ingredients on broiler carcass fat content are also important. Increasing the levels of energy in the ration increases the carcass fat content, while increasing the proteing levels decreases carcass fat content. Supplement-tation of poultry diets with amino acids such as methionine, lysine, glycine and tryptophan as well as amino acid such as well as amino acid mixtures can reduce body fat deposition. Normal stress leads to chicken muscular damage resulting in reduced meat quality, but this can be controlled by preslaughter management practices. Feed manufactures can utilize ntilize nutrient modulation to control pale soft exudative(PSE)syndrome. Finally, the success in poultry meat production depends on the consistent achievement of carefully selected levels of quality. Quality assurance should be the wider function of incorporating quality into the production system and the combination of motivating quality into actions and operations.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.253-256
• /
• 2005

The use of satellite remote sensing in maritime safety and security can aid in the detection of illegal fishing activities and provide more efficient use of limited aircraft or patrol craft resources. In the area of vessel traffic monitoring for commercial vessels, Vessel Traffic Service (VTS) which use the ground-based radar system have some difficulties in detecting moving ships due to the limited detection range. A virtual vessel traffic control system is introduced to contribute to prevent a marine accident such as collision and stranding from happening. Existing VTS has its limit. The virtual vessel traffic control system consists of both data acquisition by satellite remote sensing and a simulation of traffic environment stress based on the satellite data, remotely sensed data. And it could be used to provide timely and detailed information about the marine safety, including the location, speed and direction of ships, and help us operate vessels safely and efficiently. If environmental stress values are simulated for the ship information derived from satellite data, proper actions can be taken to prevent accidents. Since optical sensor has a high spatial resolution, JERS satellite data are used to track ships and extract their information. We present an algorithm of automatic identification of ship size and velocity. This paper lastly introduce the field testing results of ship detection by RADARSAT SAR imagery, and propose a new approach for a Vessel Monitoring System(VMS), including VTS, and SAR combination service.

• 대한한의학원전학회지
• /
• 제26권2호
• /
• pp.121-132
• /
• 2013

Objective : Bambusae Caulis in Liquamen has been used by East Asian doctors who approved efficient clinical effects of it since the early stage of medical history. It is commonly used for lifestyle related diseases including stroke in recent days thanks to the increasing number of manufacturers. However, products from pharmaceutical companies as well as food companies are not classified as Bambusae Caulis in Liquamen but Bamboo vinegar. This study aims to discern disparate manufacturing process. Methods : In this study, original texts were searched to corroborate the correct method to produce Bambusae Caulis in Liquamen. It is essential to inspect the original texts thoroughly in the course of modernizing traditional knowledge. Result : Discrimination between the two substances starts from manufacturing process; Bambusae Caulis in Liquamen is made under the temperature of less then $170^{\circ}C$, containing mild fragrance and sweet taste, and the Bamboo vinegar over $170^{\circ}C$ upto $400^{\circ}C$, carrying strong smoky scent and acidness. Although some researches show conforming clinical actions of both products, still there is a possibility that closer clinical study would reveal their discrepancy. Conclusion : Current use of Bambusae vinegar needs speculation. Authenticity in proper manufacturing process can be attained through passed-on medical texts.