• 한국가스학회지
• /
• 제27권3호
• /
• pp.91-97
• /
• 2023

오래된 디젤 엔진을 탑재하고 있는 노후화된 건설용 기계 및 차량들은 보통 수명이 길기 때문에 최신의 배기 규제와는 동떨어진 수준의 유해한 배출가스를 계속 배출하고 있다. 따라서 이러한 구형 디젤 엔진을 최신 배기 규제를 만족하는 엔진으로 대체할 수 있다면 대기질 개선에 도움이 될 것으로 기대되는데, 건설 현장에서 손쉽게 구할 수 있는 프로판 연료를 적용한 엔진이 적합한 대안이 될 수 있다. 따라서 본 연구에서는 6.8리터 CNG 엔진을 베이스로 프로판 전용 엔진을 개발하였으며, 가스 전용 인젝터, 배기가스재순환(EGR), 강화된 촉매 등의 기술이 적용되었다. 그 결과 동급의 디젤 엔진 출력 및 토크를 확보하는 한편 최신 배출가스 규제인 Stage-V 수준에서 질소산화물은 절반 수준에 해당하는 배출가스 성능을 달성하였다.

• 한국화재소방학회논문지
• /
• 제22권3호
• /
• pp.188-193
• /
• 2008

높이 1m의 수직벽면에서 3g/m^2-s$로 연소하는 프로판 수직벽 화재에 대한 수치모사를 수행하였다. 본 연구의 목적은 자연대류에서의 검증결과를 확인하고, 수직벽 화재의 수치모사의 결과를 이전의 연구와 비교하는 것이다 C_s=0.2$일 때 유동이 층류 경계층으로 나타났지만, C_s=0.1$일 때는 난류 경계층임을 확인하였다. z 방향 속도로부터 자연대류에서와 마찬가지로 난류혼합이 부족한 것으로 나타났고, 온도와 속도의 분포가 실험 및 이전의 시뮬레이션과 비교적 잘 일치하였다. 특히 x 방향 속도가 실험과 매우 잘 일치함으로써 경계층으로 공기유입이 잘 예측됨을 알 수 있었다.

• 한국산업융합학회 논문집
• /
• 제15권4호
• /
• pp.95-101
• /
• 2012

In order to explain observed catalytic reactivity of aminophosphine complexes (seven-membered chelate), total energy, net charge, atomic orbital electron population, HOMO and LUMO energy of free ligands are calculated by PM3 methods of HyperChem 6.0. Free ligands are 1,2-bis{(diphosphino)amino}propane{$H_2PNHCH_2CH(CH_3)NHPH_2$;ligand 1},1,2-bis{(dimenylphosphino)amino}propane{$(CH_3)_2PNHCH_2CH(CH_3)NHP(CH_3)_2$;ligand 2},1,2-bis{(diphenylphosphino)amino}propane{$(C_6H_5)_2PNHCH_2CH(CH_3)NHP(C_6H_5)_2$;ligand 3}. The result showed that ligand 3 is stable than ligand 2 and ligand 1 and ligand 2 is stable than ligand 1 in total energy. Net charge of P atom is changed by H atom, methyl groups and phenyl groups in P atoms. Net charge of N atoms in ligands is nagative. The results of atomic orbital electron population are similar net charge data..

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.93-100
• /
• 2002

For natural gas and LPG fuel, measurements on the concentrations of individual exhaust hydrocarbon species have been made as a function of air-fuel ratio in a 2-liter four-cylinder engine using a gas chromatography. NMHC in addition to the species of HC, other emissions such as CO$_2$, CO and NOx were examined for natural gas and LPG at 1800rpm far two compression ratios (8.6 and 10.6). Fuel conversion efficiencies were also investigated together with emissions to study the effect of engine parameters on the combustion performances in gas engines especially under the lean bum conditions. It was found that CO$_2$ emission decreased with smaller C value of fuel, leaner mixture strength and the higher compression ratio. HC emissions from LPG engine consisted primarily of propane (larger 60%), ethylene and propylene, while main emissions from natural gas were mothane (larger than 60%), ethane, ethylene and propane on the average. The natural gas was proved to give the less ozone formation than LPG fuel. This was accomplished by reducing the emissions of propylene, which has relatively high MIR factor, and propane that originally has large portion of LPG. In addition, natural gas shows a benefit in other emissions (i.e. NMHC,NOx, CO$_2$and CO), SR and BSR values except fuel conversion efficiency.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.57-60
• /
• 2007

A fluidized bed reactor made of quartz with 0.055 m I.D. and 1.0 m in height was employed for the thermocatalytic decomposition of methane to produce $CO_{2}$ - free hydrogen. The fluidized bed was proposed for the continuous withdraw of product carbons from the reactor. The methane decomposition rate with the carbon black N330 catalyst was quickly reached a quasi-steady state rate and remained for several hour. The methane and propane mixture decomposition reaction was carried out at the temperature range of 850 - 900 $^{\circ}C$, methane and propane mixture gas velocity of 1.0 $U_{mf}$ ${\sim}$ 3.0 $U_{mf}$ and the operating pressure of 1.0 atm. Effect of operating parameters such as reaction temperature, gas velocity on the reaction rates was investigated. The produced carbon by the methane decomposition was deposited on the surfaces of carbon catalysts and the morphology was observed by SEM image.

• 한국연소학회지
• /
• 제3권1호
• /
• pp.11-19
• /
• 1998

The influence of oxidant addition on soot formation is investigated experimentally with ethylene, propane and mixture fuel co-flow diffusion flames. Oxidant addition into fuel shows the increase of integrated soot volume fractions for ethylene, ethylene/ethane and ethylene/methane mixture flames. However, the increase of integrated soot volume fraction with oxidant addition was not significant for propane and ethylene/propane mixture flames. This discrepancy is explained with $C_2\;and\;C_3$ chemistry at the early stage of soot formation process. The oxidant addition increases the concentration of $C_3H_3$ in the soot formation region, and therefore, enhances soot formation process. A new soot formation rate model that includes both dilution effect and chemical effect of oxygen is suggested to interpret the increase of integrated soot volume fractions with oxidant addition into ethylene. Also, the role of adiabatic flame temperature for the chemical effect of oxygen addition into fuel was reviewed. The influence of oxidant or diluent addition into fuel on soot formation process are the fuel dilution effect, the adiabatic flame temperature altering effect and/or the chemical effect of oxygen. Their relative importance could change with fuel structure and adiabatic flame temperature.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.9-16
• /
• 2001

When large size nozzle with low jet velocity is used, the buoyancy effect arises from the density difference among propane, air, and burnt gas. Flame characteristics in such buoyant jets have been investigated numerically to elucidate the effect of buoyancy on lifted flames. It has been demonstrated that the cold jet has circular cone shape since upwardly injected propane jet decelerates and forms stagnation region. In contrast to the cold flow, the reacting flow with a lifted flame has no stagnation region by the buoyancy force induced from the burnt gas. To further illustrate the buoyancy effect on lifted flames, the reacting flow with buoyancy is compared with non-buoyant reacting flow. Non-buoyant flame is stabilized at much lower height than the buoyant flame. At a certain range of fuel jet velocities and fuel dilutions. an oscillating flame is demonstrated numerically showing that the height of flame base and tip vary during one cycle of oscillation. Under the same condition. non-buoyant flame exhibits only steady lifted flames. This confirms the buoyancy effect on the mechanism of lifted flame oscillation.

• 한국응용과학기술학회지
• /
• 제11권1호
• /
• pp.71-77
• /
• 1994

In order to review industrial application of amphoteric surfactants, new types of hydroxy sulfobetaine, 3-(N, N-dimethyl N-dimethyl-N-alkylammonio)-2-hydroxy-1-propane sulfonate and 3-(N, N-dimethyl N-acylammonio)-2-hydroxy-1-propane sulfonate were prepared by the reaction of quaternized sodium 1-chloro-2-hydroxy-3-propane sulfonate with N, N-dimethyl-N-alkylamine and N, N-dimethyl N-acylamido propylamine that have a straight chain radical of 12, 18 carbon atoms respectively in the presence of alkali catalyst. All the reaction products could be separated by means of column and thin layer chromatography, and the yields of all products ranged in $85{\sim}90%$, the structure of them could be confirmed from IR and $^{1}H$-NMR spectra.

• Macromolecular Research
• /
• 제15권4호
• /
• pp.343-347
• /
• 2007

Novel composite membranes, which delivered high separation performance for propylene/propane mixtures, were developed by coating inert poly(ethylene-co-propylene) rubber (EPR) onto a porous polyester substrate, followed by the physical distribution of $AgBF_4$. Scanning electron microscopy-wavelength dispersive spectrometer (SEM-WDS) revealed that silver salts were uniformly distributed in the EPR layer. The physical dispersion of the silver salts in the inert polymer matrix, without specific interaction, was characterized by FT-IR and FT-Raman spectroscopy. The high separation performance was presumed to stem from the in-situ dissolution of crystalline silver ionic aggregates into free silver ions, which acted as an active propylene carrier within a propylene environment, leading to facilitated propylene transport through the membranes. The membranes were functional at all silver loading levels, exhibiting an unusually low threshold carrier concentration (less than 0.06 of silver weight fraction). The separation properties of these membranes, i.e. the mixed gas selectivity of propylene/propane ${\sim}55$ and mixed gas permeance ${\sim}7$ GPU, were stable for several days.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.161-167
• /
• 2009

The regulation of the $CO_2$ emit from vehicles have become much more stringent in recent years. This stringent regulation is more request vehicle manufacturers to develop the alternative fuel vehicles for reducing exhaust emissions. LPG fuel is more clean energy compares with gasoline and diesel fuel. Especially, $CO_2$ emission of LPG Vehicle is less than gasoline vehicle and almost equal to diesel vehicle. For this reason, recently korean government is extending LPG fuel for hybrid car and light duty vehicle. In domestic, Propane is mixing $15{\sim}30%$ to butane for improvement of cold start at winter season. Therefore, In this paper was investigated that the characteristics of emissions according to propane mixing rate with 0, 10, 20, 30% were compared and analyzed by the vehicle test using LPG vehicle according to the FTP75 mode. It was also investigated the characteristics of nano-particle emit with propane mixing rate.