• Wind and Structures
• /
• v.28 no.1
• /
• pp.49-62
• /
• 2019

In this paper, an analytical analysis for the study of vibratory behavior and wave propagation of functionally graded plates (FGM) is presented based on a high order shear deformation theory. The manufacture of these plates' defects can appear in the form of porosity. This latter can question and modify the global behavior of such plates. A new shape of the distribution of porosity according to the thickness of the plate was used. The field of displacement of this theory is present of indeterminate integral variables. The modulus of elasticity and the mass density of these plates are assumed to vary according to the thickness of the plate. Equations of motion are derived by the principle of minimization of energies. Analytical solutions of free vibration and wave propagation are obtained for FGM plates simply supported by integrating the analytic dispersion relation. Illustrative examples are given also to show the effects of variation of various parameters such as(porosity parameter, material graduation, thickness-length ratio, porosity distribution) on vibration and wave propagation of FGM plates.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.6
• /
• pp.362-371
• /
• 2022

As considerable interests in noise emission from the ships have been increased, International Maritime Organization (IMO) standardized the Underwater Radiated Noise (URN) measurement process of commercial ships in deep seas by enacting the related ISO standard ISO 17208-1 and classification societies responded with the enactment or revision of corresponding notations. According to this trend, a new hybrid underwater sound propagation model based on underwater sound propagation theories was developed and its accuracy on analysis was verified through the result comparison with the results of other generally used models. Using the verified model, each URN propagation characteristics adjusted by the correction methods proposed in the ISO standard and class notations were analyzed and compared in two assumed URN measurement cases. The results showed that the effects of transmission loss corrections in the circumstances with less bottom reflections generally similar but they had rather large differences in the model analysis results with bottom-reflection-dominant conditions. It was concluded that the deep consideration of effective bottom-reflection-correction method should be made in future revisions of ISO standard and class notations.

• Structural Engineering and Mechanics
• /
• v.85 no.6
• /
• pp.729-742
• /
• 2023

It is a recent attraction to the mechanical scientists to investigate state of wave propagation, buckling and vibration in the sport balls to observe the importance of different parameters on the performance of the players and the quality of game. Therefore, in the present study, we aim to investigate the wave propagation in handball game ball in term of mass of the ball and geometrical parameters wit incorporation of the viscoelastic effects of the ball material into account. In this regard, the ball is modeled using thick shell structure and classical elasticity models is utilized to obtain the equation of motion via Hamilton's principle. The displacement field of the ball model is obtained using first order shear deformation theory. The resultant equations are solved with the aid of generalized differential quadrature method. The results show that mass of the ball and viscoelastic coefficient have considerable influence on the state of wave propagation in the ball shell structure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.889-890
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.11a
• /
• pp.292-293
• /
• 2002

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.1-8
• /
• 2007

Although the Java bytecode has numerous advantages. there ate also shortcomings such as slow execution speed and difficulty in analysis. Therefore. in order for the Java class file to be effectively executed under the execution environment such as the network, it is necessary to convert it into optimized code. We implements CTOC. CTOC generated CFG using the existing bytecode then created the SSA Form for analysis and optimization. However. due to insertion or the ${\phi}$-function in the process of conversion into the SSA Form, the number of nodes increased. As a means of reducing the number of nodes, we performed copy propagation, which is an optimization method applicable to the SSA form. Copy propagation is the process of a value of a variable being topied to another variable. There are cases where conversion due to copy propagation alone does not yield significant effects. However, when variables are not used in the later optimization stages, copy propagation provides a means for eliminating the copy statement for the corresponding variable, making it an important step. This paper shows the copy propagation to obtain a more optimized code in SSA Form.

• Structural Engineering and Mechanics
• /
• v.49 no.5
• /
• pp.597-618
• /
• 2014

For the structures containing multiple discontinuities (voids, inclusions, and cracks), the simulation technologies in the framework of extended finite element method (XFEM) are discussed in details. The level set method is used for representing the location of inner discontinuous interfaces so that the mesh does not need to align with these discontinuities. Several illustrations have been given to verify that the implemented XFEM program is effective. Then, the implemented XFEM program is used to investigate the effects of the voids, inclusions, and minor cracks on the path of major crack propagation. For a plate containing cracks and voids, two possibly crack path can be observed: i) the crack propagates into the void; ii) the crack initially curves towards the void, then, the crack reorients itself and propagates along its original orientation. For a plate with a soft inclusion, the final predicted crack paths tend to close with the inclusion, and an evident difference of crack paths can be observed with different inclusion material properties. However, for a plate with a hard inclusion, the paths tend to away from the inclusion, and a slightly difference of crack paths can only be seen with different inclusion material properties. For a plate with several minor cracks, the trend of crack paths can still be described as that the crack initially curves towards these minor cracks, and then, the crack reorients itself and propagates almost horizontally along its original orientation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.219-222
• /
• 2004

There are several factors that disturb an Ultra-Wideband (UWB) radio propagation in an indoor environment such as path loss, shadowing and multipath fading. These factors directly affect the quality of the received signal. In this paper, we investigated the influence of the human body shadowing on UWB propagation based on measured wireless channel in an anechoic chamber. The characteristics of the UWB channel including the transmitter and the receiver antenna effects are acquired over the frequency bandwidth of 3${\sim}$11 GHz. The major factors such as the power delay profile (PDP), the angular power distribution (APD), the pulse distortion and the RMS delay spread caused by the human body shadowing are presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.7
• /
• pp.2234-2245
• /
• 1996

In this study residual stress in weldment was considered about the effect on the fatigue propagation and about the effect of redistribution of residual stress. Then, fatigue tests were conducted by the center notched specimens machined with welded plate. The residual stress and its redistribution after the crack growth were measured by the magnetizing stress indicator and hole-drilling method. Fatigue crack propagation was estimated by the specimens having residual stress redistributed after the cracks growth and having the effects of crack closure. Crack growth rates were predicted and compared with experimental results. It had been found that the predicted crack propagation rates have a good agreement with experimental results when the redistribution of residual stress was considerd.

• The Korean Journal of Malacology
• /
• v.14 no.2
• /
• pp.167-172
• /
• 1998

As a preliminary study, effects of environmetal pollutants on propagation of freshwater microalgae, Cryptomonas ovata and feeding rate of Corbicula leana were investigated at 20${\pm}$1$^{\circ}C$, over 20 days after treatment of pollutants, glucose, complex fertilizer and NH4Cl. Number of C. ovata in control group was increased from 38${\times}$104 cell/ml to 1.910${\times}$104 cell/ml after 20 days cultivation in Sorokin-Krauss medium. Increments of cell number in experimental groups treated with glucose, complex fertilizer and NH4Cl were higher than that of control group. The higher propagation rate of C.ovata was observed when 30 mg/l of glucose treated, 120 mg/l of complex fertilizer treated, and 4 mg/l of NH4Cl treated, compared with other concentrations in each pollutant treated group. The feeding rates of large size group of C. leana which fed with a living organism, C. ovata in each experimental group were higher than small size group, and slightly reduced with the increase of pollutant concentrations. The feeding rates were not significantly different between any concentrations of the pollutant, and among experimental groups treated with glucose, complex fertilizer and NH4Cl.