• The Bulletin of The Korean Astronomical Society
• /
• 제37권1호
• /
• pp.67.2-67.2
• /
• 2012

경희대학교와 UC Berkeley, Imperial College London은 우주관측을 위한 초소형 인공위성인 TRIO-CINEMA(TRIO-CINEMA) Project를 수행하고 있다. TRIO-CINEMA는 총 3기의 인공위성으로 경희대학교에서 2기의 위성을, UC Berkeley에서 1기의 위성을, Imperial College에서 3개의 자력계를 제작하고 있다. CINEMA는 Cubesat의 3U 규격으로 크기는 $100mm{\times}100mm{\times}340.5mm$이고 무게는 약 3 kg, 소비전력은 약 3 W이며, 지구 주변의 ENA측정을 위한 주 탑재체인 STEIN(SupraThermal Electrons, Ions, and Neutrals)과 자기장 측정을 위한 부 탑재체인 MAGIC(MAGnetometer from Imperial College)이 탑재되어 약 1년간 800 km 태양동주기 궤도에서 임무를 수행할 예정이다. 위성의 발사는 별도의 POD(Picosatellite Orbital Deployer)라는 Adaptor를 사용해 발사체에 탑재되는데, 발사환경에서 위성이 받을 모든 현상에 관하여 NX Nastran을 사용해 계산을 진행하였다. 계산 결과의 검증을 위해 위성의 Structure Model을 가지고 Random Vibration test를 수행해 위성의 고유 진동수를 측정하였다. 또한 위성이 궤도에서 운용 중 다양하게 받게 되는 열원에 따른 위성의 각 부분의 온도변화를 NX TMG program을 사용하여 계산하였다. 계산 결과의 검증을 위해 3월 Thermal Cycle test 및 Thermal Balance test를 수행할 예정이다. UC Berkeley에서 제작한 위성 1기는 제작완료 후 발사를 위해 발사장으로 배송을 완료하였고, 경희대학교에서 제작 중인 CINEMA 위성 2기는 2012년 후반기 러시아에서 Dnepr 로켓을 사용해 발사 예정이다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.214-220
• /
• 2003

Pipe jacking is a name for a method to excavate a tunnel by pushing pipe into the ground from an especial pit. Size of tunnels in this method is different from under 900mm (microtunneling) to more than 3,000mm. Method of excavation is also different from hand digging to use of any kind of tunnel boring machines such as slurry and earth pressure balance (EPB) machines. Slurry pipe jacking was firmly established as a special method for the nondisruptive construction of the underground tunnels in urban area. During the pipe jacking and microtunneling process, the jacking load is an important parameter, controlling the pipe wall thickness, need to and location of intermediate jacking station, selection of jacking frame and lubrication requirements. The main component of the jacking load is due to frictional resistance. In this paper the skin friction between pipe surface and surrounding condition also lubricant quality based on a few fundamental tests, were considered. During this study unconfined compressive strength test, dynamic friction measurement test and direct shear box test were raised for one of the largest diameter slurry pipe jacking project in Fujisawa city in Japan. It could be concluded that in slurry pipe jacking, prediction of frictional forces are mainly dependent on successful lubrication, its quality and lubricant strength parameters. Conclusions from this study can be used for the same experiences.

• BMB Reports
• /
• 제49권10호
• /
• pp.529-535
• /
• 2016

The NLRP3 inflammasome is activated by a variety of external or host-derived stimuli and its activation initiates an inflammatory response through caspase-1 activation, resulting in inflammatory cytokine IL-1β maturation and secretion. The NLRP3 inflammasome activation is a kind of innate immune response, most likely mediated by myeloid cells acting as a host defense mechanism. However, if this activation is not properly regulated, excessive inflammation induced by overactivated NLRP3 inflammasome can be detrimental to the host, causing tissue damage and organ dysfunction, eventually causing several diseases. Previous studies have suggested that mitochondrial damage may be a cause of NLRP3 inflammasome activation and autophagy, which is a conserved self-degradation process that negatively regulates NLRP3 inflammasome activation. Recently, mitochondria-selective autophagy, termed mitophagy, has emerged as a central player for maintaining mitochondrial homeostasis through the elimination of damaged mitochondria, leading to the prevention of hyperinflammation triggered by NLRP3 inflammasome activation. In this review, we will first focus on the molecular mechanisms of NLRP3 inflammasome activation and NLRP3 inflammasome-related diseases. We will then discuss autophagy, especially mitophagy, as a negative regulator of NLPP3 inflammasome activation by examining recent advances in research.

• Journal of Community Nutrition
• /
• 제2권1호
• /
• pp.52-61
• /
• 2000

Dietary guidelines are a distillation of dietary advice from health professionals to the general public. They are based upon current scientific knowledge about the relationships between diet and disease, nutrients available in the food supply of a country, and the profile of morbidity and mortality in that country. With two different sets of dietary guidelines used for more than an decade in Korea. the necessity of revising dietary guidelines has been raised continuously from academia and research. Funded by a grant from the Health Technology Planing and Evaluation Board. Dietary guidelines for each age group were drafted as a research project and the one for the Korean elderly is as follows: Dietary Guidelines for the korean elderly(draft) - Have a variety of easily digestible foods on time; at least 3 meals a day and some snakes. - Be physically active to maintain appetite and/or ideal body weight. ; maintain a balance between activity and what you eat. -Increase consumption of bean-and dairy-and dairy-products. - Consume enough amounts of fresh dark-green and yellow vegetables and fresh fruits. - Consume adequate amounts of assorted kind of animal foods including fish, meat and poultry. - If you drink alcoholic beverages, limit your intake and, drink enough water and other averages; alcohol may interact with your medication and affect your appetite. Aforementioned draft and related contents are expected to be utilized as a neat base in formulating(or revising) dietary guidelines for Korean by the Government in near future.

• Magazine of the Korean Society of Agricultural Engineers
• /
• 제24권4호
• /
• pp.99-108
• /
• 1982

This thesis aims to estimate the rainfall runoff from paddy field in a small watershed during irrigation period. When the data observed at the proposed site are not available, the Monthly Runoff Equation of Korean Rivers which was derived from data observed under the following assumptions is used to study the water balance. a. Monthly base flow was assumed as 10. 2mm even if these is no mouthly rainmfall. b. Monthly comsumption of rainfall was ranged from 100 to 2OOmm without relation to the rainfall depth. However, the small watershed which consists mainly of paddy fields encounters severe droughts and accordingly the baseflow is negligible. Under the circumstances the author has developed the following equation called "Flood Irrigation Method for Rainfall Runoff "taking account of the evapotranspiration, precipitation, seepage, less of transportation, etc. R= __ A 7000(1 +F) -5n(n+1)+ (n+1)(Pr-S-Et)] where: R: runoff (ha-m) A: catchment area (ha) F: coefficient of loss (o.o-0. 20) Pr: rainfall (mm) S: seepage Er: evapotranspiration (mm) To verify the above equation, the annual runoff ratio for 28 years was estimated using the Monthly Runoff Equation of Korean Rivers the Flood Irrigation Method and the Complex Hydrograph Method based on meteorological data observed in the Dae Eyeog project area, and comparison was made with data observed in the Han River basin. Consequently, the auther has concluded that the Flood Irrigation Method is more consi- stent with the Complex Hydrograph Method and data observed than the Monthly Runoff Equation of Korean Rivers.

• Nuclear Engineering and Technology
• /
• 제33권2호
• /
• pp.209-224
• /
• 2001

The SSC-K system analysis code is under development at the Korea Atomic Energy Research Institute (KAERI) as a part of the KALIMER project. The SSC-K code is being used as the principal tool for analyzing a variety of off-normal conditions or accidents of the preliminary KALIMER design. The SSC-K code features a multiple-channel core representation coupled with a point kinetics model with reactivity feedback. It provides a detailed, one-dimensional thermal-hydraulic simulation of the primary and secondary sodium coolant circuits, as well as the balance-of-plant steam/water circuit. Recently a two-dimensional hot pool model was incorporated into SSC-K for analysis of thermal stratification phenomena in the hot pool. In addition, SSC-K contains detailed models for the passive decay heat removal system and a generalized plant control system. The SSC-K code has also been applied to the computational engine for an interactive simulation of the KALIMER plant. This paper presents an overview of the recent activities concerned with SSC-K code model development This paper focuses on both descriptions of the newly adopted thermal hydraulic and neutronic models, and applications to KALIMER analyses for typical anticipated transients without scram.

• Journal of the Korean Institute of Rural Architecture
• /
• 제22권2호
• /
• pp.35-42
• /
• 2020

The new urbanization is one of prestige growth engines to lead the next generation of China economy, it promotes new sustainable urban development models guided by various planning polices to improve urban livability and sustainability in accommodation with economy, social, and environmental consideration. The expanding urban periphery to rural area should leverages existing assets, infrastructure, local context and plans as a showcase of environmental and economic balance in a responsibly high-density, green community designed to human development and ecological settlement. The Beijing Chaoyang District and Tianjin Binhai area are a strategic advancement in the policy of building one of the most powerful economic regions, the Bohai Rim. Recently released 'Jingjinji development plan' supports various urbanization policies and encourages sustainable developments including 2 significant city center projects which are under way in global attention. The study compared on the characters of development policies and the cutting-edge smart design strategies by which they are applied, the master plan of the Beijing Chaoyang District expansion plan and Tianjin Yujiapu CBD project embrace innovative sustainable technologies.

• KIEE International Transactions on Power Engineering
• /
• 제4A권4호
• /
• pp.221-226
• /
• 2004

As power systems grow more complex and power demands increase, the fault current tends to gradually increase. In the near future, the fault current will exceed a circuit breaker rating for some substations, which is an especially important issue in the Seoul metropolitan area because of its highly meshed configuration. Currently, the Korean power system is regulated by changing the 154kV system configuration from a loop connection to a radial system, by splitting the bus where load balance can be achieved, and by upgrading the circuit breaker rating. A development project applying a 154kV Superconducting Fault Current Limiter (SFCL) to 154kV transmission systems is proceeding with implementation slated for after 2010. In this paper, SFCL is applied to reduce the fault current in power systems according to two different application schemes and their technical and economic impacts are evaluated. The results indicate that both application schemes can regulate the fault current under the rating of circuit breaker, however, applying SFCL to the bus-tie location is much more appropriate from an economic view point.

• Journal of the Korean Home Economics Association
• /
• 제36권3호
• /
• pp.207-224
• /
• 1998

This study is approach to the Home-Based Work. More specifically, to examine about the families who try to combined home life and income-generation work under the same roof. Families were looking at Home-Based Work as one solution to the work-family crunch. Many research papers have suggested that Home-Based Work provides an effective way to balance the demands of paid employment and family responsibilities. Therefore, this proposed research reviewed the Home-Based Work as they contributed to individual and family satisfactions. The Prupose of this paper is to address issues related to Home-Based Work from the perspective of theory and application in family resource management, also to suggest a conceptual model for family work activities is advanced. This paper is examined concepts related to Home-Based Work employment that could be used to frame and describe the empirical study are specified. This paper was informed by analyses of data from project NE-167. "At-Home Income Generation: Impact on Management, Productivity, and Stability in Rural/Urban Families". The results from this paper will be helpful in enhancing the stability and satisfaction of families who worked in Home-Based Work.ased Work.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.199-200
• /
• 2006

PM recent developments focus on increasing this technology's competitiveness when compared to wrought materials. Warm compaction allows the replacement of a double press double sinter process with a single warm press and sintering step, thus allowing cost and time savings. Moreover there are added benefits to consider such as reducing work in process and lessening part's logistics cost. This paper presents a successful industrial trial to replace a double press-double sinter process with a warm die compaction and sintering process. The part chosen was a high performance gear containing 0,9% wt. carbon. Sintering was conducted in a belt furnace at $1120^{\circ}C$ in a nitrogen rich atmosphere with rapid cooling process in order to obtain a quasi fully martensitic structure with a minimum of 700HV0,1 and 450HV10 after annealing. The balance between properties and cost is favoured by the use of a singular lubricant developed in a Eureka frame project together with POMETON S.A. and die warm compaction. Warm compaction is only needed to be effective on the gear teeth, in order to achieve the required properties. Therefore only the die is actually heated. This simplified system avoids flow rate problems typically involved when using more elaborate warm compaction equipments.