• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.352-359
• /
• 2010

In recent years, the market has shown increasing interest in pump-turbines. The prompt availability of pumped storage plants and the benefits to the power system achieved by peak lopping, providing reserve capacity, and rapid response in frequency control are providing a growing advantage. In this context, there is a need to develop pumpturbines that can reliably withstand dynamic operation modes, fast changes of discharge rate by adjusting the variable diffuser vanes, as well as fast changes from pumping to turbine operation. In the first part of the present study, various flow patterns linked to operation of a pump-turbine system are discussed. In this context, pump and turbine modes are presented separately and different load cases are shown in each operating mode. In order to create modern, competitive pump-turbine designs, this study further explains what design challenges should be considered in defining the geometry of a pump-turbine impeller. The second part of the paper describes an innovative, staggered approach to impeller development, applied to a low head pump-turbine project. The first level of the process consists of optimization strategies based on evolutionary algorithms together with 3D in-viscid flow analysis. In the next stage, the hydraulic behavior of both pump mode and turbine mode is evaluated by solving the full 3D Navier-Stokes equations in combination with a robust turbulence model. Finally, the progress in hydraulic design is demonstrated by model test results that show a significant improvement in hydraulic performance compared to an existing reference design.

• 대한가정학회지
• /
• 제36권3호
• /
• pp.207-224
• /
• 1998

This study is approach to the Home-Based Work. More specifically, to examine about the families who try to combined home life and income-generation work under the same roof. Families were looking at Home-Based Work as one solution to the work-family crunch. Many research papers have suggested that Home-Based Work provides an effective way to balance the demands of paid employment and family responsibilities. Therefore, this proposed research reviewed the Home-Based Work as they contributed to individual and family satisfactions. The Prupose of this paper is to address issues related to Home-Based Work from the perspective of theory and application in family resource management, also to suggest a conceptual model for family work activities is advanced. This paper is examined concepts related to Home-Based Work employment that could be used to frame and describe the empirical study are specified. This paper was informed by analyses of data from project NE-167. "At-Home Income Generation: Impact on Management, Productivity, and Stability in Rural/Urban Families". The results from this paper will be helpful in enhancing the stability and satisfaction of families who worked in Home-Based Work.ased Work.

• Journal of Information Technology Applications and Management
• /
• 제24권3호
• /
• pp.23-49
• /
• 2017

This paper is part of the dissertation for an MSc in Project Management and Innovation of Strathclyde Business School The research aims at understanding how IT-SMEs (Small and Medium-sized Enterprises in Information Technology Business) implement and use Flexible Work Arrangements and Flexible Working Hours (FWH/FWA) in their organisations. In-depth interview data was collected from managers and business owners of 31 companies whose needs for Work-Life Balance varied. Results show that many factors positively influence IT-SMEs to use FWH/FWA. For example, customers and partners working at different work-hours, traffic congestions between home and office, and the general stereotype of IT personnel. However, the results also found several concerning factors that may hamper the success of FWH/FWA implementation. They include the inadequacy of management skills in tracking, monitoring, and assessing employee's real performance, contextual factors for Thai IT-SMEs, i.e. conflict resolution culture, IT people's protocol of communication exchanges, and shortcoming of technology infrastructure. The findings also show that many companies that had used FWA eventually stopped. Thus, a four-phase cyclical framework called PLIC (Purpose-Limitation-Implementation-Consequence) has been developed as an approach to FWH/FWA implementation.

• 한국실내디자인학회논문집
• /
• 제39호
• /
• pp.100-107
• /
• 2003

The purpose of this study is to help create environments for early childhood education according to the principles of Constructivism. Generally, preschools in Ulsan Metropolitan City were used as samples for this study More particularly, 116 kindergartens were surveyed by telephone to evaluate their education programs. Four kindergartens that completely or partially used Constructivism in their programs were chosen as primary subjects for this study The results of this study were as follows: First, it was discovered that preschool education in Ulsan uses an integrated education model based on activities and Montessorie. Constructivist programs were also present using Project Approach, Reggio Emilia and Piaget. Second, the number of infants per class averaged 29.3. The average infants per playroom was 2.38$m^2$. It seems, therefore, that there is a lack of sufficient space for activities. Playroom furniture is primarily used for storage and it lacks variety and flexibility of use. The interior of preschools in related to materials, color and images also showed little difference among schools. Third, it was found that virtually every play space did not have adequate water playing and sand playing sections. Instead, the space for the large-muscle activities of big groups was used for this purpose. Fourth, kindergartens that use the principles of Constructivism plan to specialize their activities. Those only partially using Constructivism showed conventional tendencies and small play spaces that would be defined as inadequate according to Constructivism. This study, therefore, demonstrates that preschool education based on Constructivism are not being well-implemented in concert with other programs.

• 대한산업공학회지
• /
• 제40권2호
• /
• pp.172-183
• /
• 2014

This paper measures and compares the efficiency of national health technology R&D programs focused on translational research program increasing importance using data envelopment analysis (DEA). Three input variables and three output variables are selected for DEA. Inputs are funds, researchers, and project period and outputs are SCI (E) papers, applied and granted patents, and impact factor. This study uses a three-stage approach. In the first stage, output-based DEA model is applied to evaluate the efficiency of decision making unit (DMU). In the second stage, based on efficiency scores of target diseases high-efficiency group and low-efficiency group are classified. And then strategic portfolio matrix of translational research program is composed of four dimensions combining research types. Mann-Whitney U test is then run to compare average efficiency scores among four groups. In the final stage, Tobit regression model is used to estimate factors likely to influence the efficiency. The results are expected to provide policy implications for effectively establishing investment strategy and managing performance of R&D program.

• 한국군사과학기술학회지
• /
• 제19권2호
• /
• pp.218-226
• /
• 2016

In the original design of K2 tank the Vertical Sensor Unit(VSU) was mounted to measure the attitude of the main gun to enhance the hit probability. In this research, as a part of efforts to reduce the cost of K2, it was theoretically simulated and evaluated to use the data from Inertial Navigation System(INS) for the calculation of the gun attitude instead of the direct measurement using VSU. It was found that the negative effect of INS approach is negligible and the elimination of VSU is technically possible and beneficial to the system.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.628-634
• /
• 2010

The paper describes aspects regarding an E-learning approach of resonant ac inverters. The learning process is based on "Learning by Doing" paradigm supported by several learning tools: electronic course materials, interactive simulation, laboratory plants and real experiments accessed by Web Publishing Tools under LabVIEW. Built on LabVIEW and accompanied by a robust, flexible and versatile hardware, the experiment allows a comprehensive study by remote controlling and performing real measurements on the inverters. The study is offered in a gradual manner, according to the Leonardo da Vinci project EDIPE ($\b{E}$-learning $\b{D}$istance $\b{I}$nteractive $\b{P}$ractical $\b{E}$ducation) philosophy: theoretical aspects followed by simulations, while in the end the real experiments are investigated. Studying and experimenting access is opened for 24 hours a day, 7 days a week under the Moodle booking system.

• Asia pacific journal of information systems
• /
• 제20권1호
• /
• pp.101-125
• /
• 2010

This paper uses the status inconsistency theory to identify factors related to team members' (dis)satisfaction with the composition of virtual IT project teams in order to predict their turnover intentions. Our approach is based on the premise that virtual teams, although increasingly popular among global organizations, create an environment replete with cultural and functional diversity. Yet, a paradox exists: increasing diversity in virtual teams maximizes the creation and use of organizational knowledge while simultaneously increasing dissatisfaction and turnover. This is a critical issue in the formation and management of virtual teams. Therefore, we investigate how team members' perceptions of differences among themselves (i.e. foreignness) impact the stability of team membership, leading to what we describe as a 'liability of foreignness.' Findings indicate that a member's perception of foreignness has a detrimental effect on satisfaction with his or her team members while satisfaction is likely to decrease turnover intention. This may be an implication that managers need to maintain a balance in order to discourage member turnover and the loss of key players.

• Advances in concrete construction
• /
• 제1권3호
• /
• pp.201-213
• /
• 2013

While recognizing the problem of reinforcement corrosion and premature structural deterioration of reinforced concrete (RC) structures as a combined effect of mechanical and environmental actions (carbonation, ingress of chlorides), emphasis is given on the effect of the latter, as most severe and unpredictable action. In this study, a simulation tool, based on proven predictive models utilizing principles of chemical and material engineering, for the estimation of concrete service life is applied on an existing reinforced concrete bridge (${\O}$resund Link) located in a chloride environment. After a brief introduction to the structure of the models used, emphasis is given on the physicochemical processes in concrete leading to chloride induced corrosion of the embedded reinforcement. By taking under consideration the concrete, structural and environmental properties of the bridge investigated, an accurate prediction of its service life is taking place. It was observed that the proposed, and already used, relationship of service lifetime- cover is almost identical with a mean line between the lines derived from the minimum and maximum critical values considered for corrosion initiation. Thus, an excellent agreement with the project specifications is observed despite the different ways used to approach the problem. Furthermore, different scenarios of concrete cover failure, in the case when a coating is utilized, and extreme deicing salts attack are also investigated.

• Computers and Concrete
• /
• 제21권6호
• /
• pp.697-703
• /
• 2018

Compressive strength is one of the most important engineering properties of concrete, and testing of the compressive strength of concrete specimens is often costly and time consuming. In order to provide the time for concrete form removal, re-shoring to slab, project scheduling and quality control, it is necessary to predict the concrete strength based upon the early strength data. However, concrete compressive strength is affected by many factors, such as quality of raw materials, water cement ratio, ratio of fine aggregate to coarse aggregate, age of concrete, compaction of concrete, temperature, relative humidity and curing of concrete. The concrete compressive strength is a quite nonlinear function that changes depend on the materials used in the concrete and the time. This paper presents an adaptive neuro-fuzzy inference system (ANFIS) for the prediction of concrete compressive strength. The training of fuzzy system was performed by a hybrid method of gradient descent method and least squares algorithm, and the subtractive clustering algorithm (SCA) was utilized for optimizing the number of fuzzy rules. Experimental data on concrete compressive strength in the literature were used to validate and evaluate the performance of the proposed ANFIS model. Further, predictions from three models (the back propagation neural network model, the statistics model, and the ANFIS model) were compared with the experimental data. The results show that the proposed ANFIS model is a feasible, efficient, and accurate tool for predicting the concrete compressive strength.