• 대한전자공학회논문지SP
• /
• 제40권5호
• /
• pp.322-331
• /
• 2003

HDTV(high-definition television)와 개인용 컴퓨터와 같은 다양한 매체의 발전에 따라 비월주사(interlaced scanning) 방식의 신호와 순차주사(progressive scanning) 방식의 신호 상호간의 변환에 대한 요구가 점점 늘어나고 있으며, 특히 비월주사 방식을 순차주사 방식으로 바꾸어주는 순차주사화(deinterlacing)가 활발히 연구되고 있다. 이러한 추세에 따라 본 논문에서는 부화소 단위의 움직임 정보를 이용한 순차주사화 알고리즘을 제안한다 이를 위해 움직임 추정과정에서 발생하는 부정확한 부화소 단위의 움직임 정보에 대하여 모델링하였다. 또한 집합이론(set-theory)에 근거하여 어떠한 사전 정보 없이 정규화값(regularization parameter)을 결정하여 영상들간의 부정확한 움직임에 의해 발생하는 에러를 최소화하였다. 본 논문에서 제안된 알고리즘은 실험을 통하여 검증 할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.267-267
• /
• 2003

• 전자공학회논문지B
• /
• 제31B권3호
• /
• pp.69-79
• /
• 1994

DCT image coding has been well known for its compression efficiency. Its nature makes it also suitable for efficient progressive transmission and reconstruction since low frequency transform coefficients contain most of the energy of image signals. In this paper, we propose a progressive transmission technique of DCT image by non-sequential bit ordering using Lloyd-Max quantizer. And then, we will show that the Lloyd-Max quantizer can be embedded quantization. In simulation results, the proposed method show better subjective picture and MSE of the reconstructed image than the conventional zig-zag scanning transmission of transform coefficients.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.841-844
• /
• 2003

In the semiconductor and the optical industry a new transport system which can replace the conventional sliding system is required. These systems are driven by magnetic field and conveyer belt. The magnetic field damages semiconductor and contact force scratches the optical lens. The ultrasonic wave driven system can solve these problem. In this paper, the vibration behavior of flexural beam in the ultrasonic transport system is verified using Laser Scanning Vibrometer. The experiments for verifying vibration are performed in three conditions such as in the maximum transport speed, in the zero speed, and in the change of transport direction.

• 소성∙가공
• /
• 제22권6호
• /
• pp.317-322
• /
• 2013

A radio frequency(R/F) switch connector is widely used in wireless devices such as mobile phone and navigator to check defects of the circuit board of product. The R/F switch connector shell plays a role in protecting the switch connector. Previously, this part was machined using a turning, which is time-consuming and has poor material utilization. Furthermore, the workpiece material of brass containing lead that has excellent machinability has environmentally regulated during recent years. The purpose of the current study was to develop the connector shell by forming through progressive dies including embossing, burring and forging process in order to achieve higher productivity and dimensional accuracy without tool failure. To accomplish this objective, a strip layout was designed and finite element (FE) analysis was performed for each step in the process. Try-out for the connector shell was conducted using progressive die design based on FE-analysis results. Dimensional accuracy of developed part was investigated by scanning electron microscopy. The result of the investigation for the dimensions of the formed connector shell showed that the required dimensional accuracy was satisfied. Moreover, productivity using the progressive die increased four times compared to previous machining process.

• Journal of Periodontal and Implant Science
• /
• 제14권1호
• /
• pp.77.2-77.2
• /
• 1984

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.155-158
• /
• 2003

In the semiconductor and the optical industry a new transport system which can replace the conventional sliding system is required. These systems are driven by magnetic field and conveyer belt. The magnetic field damages semiconductor and contact force scratches the optical lens. The ultrasonic wave driven system can solve these problem. In this paper, the vibration behavior of flexural beam in the ultrasonic transport system is verified using Laser Scanning Vibrometer. The experiments for verifying vibration are performed in three conditions such as in the maximum transport speed, in the zero speed, and in the change of transport direction.

• 전기전자학회논문지
• /
• 제7권2호
• /
• pp.197-209
• /
• 2003

현행 TV 신호는 HDTV나 컴퓨터 모니터에서 사용하는 encoding 기술과는 완전히 다르다. 다시 말하면 기존의 아날로그 TV에서는 Interlace 방식을 사용하는 반면 HDTV 및 컴퓨터 모니터에서는 Interlace 방식 대신 Progressive 방식을 사용한다. 따라서 Interlace 방식을 사용하는 미디어의 신호를 Progressive 방식을 사용하는 미디어에서 사용하기 위해서는 보간 알고리즘이 필요하다. 보간 알고리즘으로는 ELA(Edge-Based Line Average) 알고리즘이 보편적으로 사용된다. 본 논문에서는 ELA 알고리즘의 수평 및 수직 윤곽선 복원 단점을 개선시킨 ADI(Adaptive De-interlacing Interpolation) 알고리즘을 사용하여 Interlace 방식의 YUV 디지털 신호를 Progressive 방식의 RGB 디지털 신호로 변환시켜 주는 주사선 변환 ASIC 칩을 설계하였다. 설계 언어로는 VHDL이 사용되었다.

• 한국통신학회논문지
• /
• 제19권10호
• /
• pp.1900-1909
• /
• 1994

현행 NTSC TV 방식은 매우 정교하지만, 몇가지 본질적인 문제를 갖고 있다. 실제 TV 시스템에서의 문제중의 하나가 수직방향에서의 화질열화를 초래하는 비월주사에 의한 것이다. 본 논문에서는 Pseudomedian 필터를 이용한 비월주사에서 순차주사로의 변환방식을 제안하였다. 제안된 방식은 기존의 미디안 필터를 이용한 처리방식과는 달리 동일 필드내에서 처리가 이루어지기 때문에, 필드 메모리없이 구현될 수 있으며, 성능은 미디안 필터방식에 근사한다. 컴퓨터 시뮬레이션을 통하여 제안된 방식과 기존의 방식을 비교하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.199-202
• /
• 2001

A current TV-OUT format is quite different from that of HDTY or PC monitor in encoding techniques. In other words, a conventional analog TV uses interlaced display while HDTV or PC monitor uses Non-interlaced / Progressive-scanned display. In order to encode image signals coming from devices that takes interlaced display format for progressive scanned display, a hardware logic in which scanning and interpolation algorithms are implemented is necessary. The ELA (Edge-Based Line Average) algorithm have been widely used because it provided good characteristics. In this study, the ADI(Adaptive De-interlacing Interpolation) algorithm using to improve the algorithm which shows low quality in vertical edge detections and low efficiency of horizontal edge lines. With the De-interlacing ASIC chip that converts the interlaced Digital YUV to De-interlaced Digital RGB is designed. The VHDL is used for chip design.