• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.12
• /
• pp.1243-1249
• /
• 2014

The naval mine is the explosives that are installed in the water in order to attack surface ships or submarines. So mine warfare is a very important component of naval operations. In this paper, first, understanding of the general concept about mine warfare. Second, introduce the mine hunting progress and mine sweeping progress. And then, suggest the system design method of mine counter measure warfare using several functions. The functions are mine area detection algorithm for side scan sonar image using Adaboost algorithm, and calculation to mine hunting progress rate and mine sweeping progress rate. And techniques that lead the mine disposal vehicle(MDV) to mine.

• Journal of Technology Innovation
• /
• v.31 no.1
• /
• pp.105-148
• /
• 2023

This paper provides a new method of measuring the degree of technological progress which contributes to real economic growth based on Schumpeter's Trilogy. Using Microdata of Statistics Korea, the results of measuring and comparing the actual growth contribution of technological progress during the period 2003-2018 by the total factor productivity growth rate(growth accounting method), the R&D investment contribution rate, and the Schumpeterian innovation growth rate, respectively are as follows. First, the measurement of the real growth contribution of technological progress by the growth rate of total factor productivity and the growth rate of Schumpeterian innovation shows contradictory results. Second, when the growth rate of production is in a decreasing trend, the difference between the growth rate of production and the growth rate of total factor productivity increases compared to when it is in an increasing trend. Conversely, when there is an increasing trend, the difference between the growth rate of production and the growth rate of total factor productivity becomes smaller compared to when it is in a decreasing trend.. Third, the technological opportunity that affects the innovation growth rate, i.e., the contribution of R&D incentives to innovative growth is only 3.3%. The reason why this result is different from the existing perception of the contribution of technological progress to growth is that different entities are being measured while measuring the same term of technological progress. Therefore, the growth rate of total factor productivity should be used to measure macroeconomic efficiency, R&D investment should be used to measure the effectiveness of new technology supply, and the Schumpeterian innovation rate should be used to measure the economic impact of technological progress. The policy implications of the research results of this thesis are as follows: ① Transition from a policy of one-sided technology supply to a policy of convergence of technology supply and new technology demand support, ② Mission-oriented R&D policy and R&D policy that links national R&D with private R&D, ③ Reclassification of capital goods reflecting the degree of new knowledge.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.513-516
• /
• 2008

In this study the prediction model of Chloride Ion progress rate of concrete using steel powder as an addition is developed, in which the reduction of not only the diffusion rate of $Cl^-$ but also the corrosion rate by replenishment of pore by corrosion products. The model is based on the diffusions of $Cl^-$ and its reaction with $Fe^{2+}$, in chloride attack progression region. The model can also explain the characteristics of chloride ion permeation resistance of concrete that the matrix is densified due to corrosion products. The prediction by the model agreed well the experimental data in which the concrete using steel powder, and it showed the lower rate in long-term age to Chloride Ion progress rate than the concrete without steel powder. Consequently the model can predict Chloride Ion progress rate of concrete exposed in the atmosphere regardless of the water-to-cement raito, the amount of the content of steel powder, etc.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.5
• /
• pp.23-34
• /
• 2011

Reliable progress management at construction requires integrated information of cost and schedule, and information is used as a basis for project performance measurement. However, separate handling of cost and schedule information at construction projects makes objective measurement more difficult and decreases management productivity due to additional works for breaking down bill of quantities into corresponding activities. Recently, research related to BIM addresses issues on effective progress management based on BIM with incorporation of daily progress management. Therefore, the objective of this paper is to propose information model for daily progress rate and budgeted cost of work performed by utilizing BTM-based quantity and location information.

• Korean Journal Plant Pathology
• /
• v.14 no.2
• /
• pp.150-156
• /
• 1998

To develop a model for prediction of turnip mosaic virus(TuMV) disease progress of Chinese cabbage based on weather information and number of TuMV vector aphids trapped in Taegwallyeong alpine area, data were statistically processed together. As the variables influenced on TuMV disease progress, cumulative portion(CPT) above 13$^{\circ}C$ in daily average temperature was the most significant, and solar radiation, duration of sunshine, vector aphids and cumulative temperature above $0^{\circ}C$ were significant. When logistic model and Gompertz model were compared by detemining goodness of fit for TuMV disease progress using CPT as independent variable, regression coefficient was higher in the logistic model than in the Gompertz model. Epidemic parameters, apparent infection rate and initial value of logistic model, were estimated by examining the relationship between disease proportion linearized by logit transformation equation, In(Y/Yf-Y) and CPT. Models able to describe the progression of TuMV disease were formulated in Y=100/(1+128.4 exp(-0.013.CPT.(-1(1/(1+66.7.exp(-0.11.day). Calculated disease progress from the model was in good agreement with investigated actual disease progress showing high significance of the coefficient of determination with 0.710.

• 한국해양학회지
• /
• v.27 no.1
• /
• pp.11-18
• /
• 1992

To study on feeding behavior of copepods, Calanus sinicus and Acartia clausi(A. omorii), variations of filtering rate and rate of food intake with the changes of phytoplankton concentrations and time progress were measured in laboratory. Filtering rates of the two species of copepod declined with increasing of the food concentration and the averaging filtering rates C. sinicus and A. clausi were 2.42m/ copepod/hr., 3.37 ml/copepod/hr. respectively. And the rates of food intake increased with food concnetration up to a critical concentration. At higher concentrations, the rates of food intake were somewhat variable but kept the constance levels. Filtering rates of copepods with time progress didn't show diel feeding rythms and generally decreased. But filtering rate of A. Clausi increased by the increment of feeding in a few hours. consequently, two copepods showed similar tendency in the rate of food intake and filtering rate with phytoplankton concentrations. However, the measured values appeared differently. And the two species of copepod with time progress showed the non-continuous feeding behavior.

• Quality Improvement in Health Care
• /
• v.4 no.2
• /
• pp.174-183
• /
• 1997

Background : Medical records thought to be reflecting the quality of medicine. By this ground, examination of medical records can be served to evaluate, and to improve the quality of medical care. To examine the medical records, we need some standards or checklists which can be used to sort out the problems. Methods: We developed checklists for medical records evaluation. We studied 1,677 medical records about its completeness using this checklists in one educational hospital. Survey was completed by 5 well trained staffs of medical record department. Results are analyzed. SPSS/PC+ program was used for statistics. Results : 13.8% of discharge summary was incomplete. Recording of the demographic information was also poor in incomplete medical records compared to complete ones. Progress note was recorded average 4.16 times during 11.9 hospital days. After 4th hospital day, recording rate of progress note dropped sharply. Rate of professor's signature on operation records was poor(27%). He or she who described the discharge summary well also wrote progress note well. Conclusions: Fill-up of demographic date should be stressed during medical record education program. Strategy to create the environment emphasizing the responsibility of professor on quality medical record should be made. We suggest new index (number of records/hospital stay) for the evaluation of completeness of progress note.

• 한국초전도학회:학술대회논문집
• /
• v.13
• /
• pp.3-3
• /
• 2003

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.547-554
• /
• 2016

This study considered how to estimate the deterioration rate of the track quality index, which represents track geometric irregularity. Most existing studies have used a simple linear regression and regarded the slope of the regression equation as the progress rate. In this paper, we present a Bayesian approach to estimate the track irregularity progress. This Bayesian approach has many advantages, among which the biggest is that it can formally include the prior distribution of parameters which can be derived from historic data or from expert experiences; then, the rate can be expressed as a probability distribution. We investigated the possibility of applying the Bayesian method to the estimation of the deterioration rate by comparing our bayesian approach to the conventional linear regression approach.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.10
• /
• pp.817-822
• /
• 2008

Fretting wear is one of the important degradation mechanisms of steam generator tubes in the nuclear power plants. Especially, impact fretting wear occurred between steam generator tubes and tube support plates or anti-vibration bar. Various tests have been carried out to investigate the wear mechanisms and to report the wear coefficients. Those are fruitful to get insight for the wear damage of steam generator tubes; however, most wear researches have concentrated on sliding wear of the steam generator tubes, which may not represent the wear loading modes in real plants. In the present work, impact fretting tests of steam generator tube were carried out. A wear progress model for impact-fretting wear has been investigated and proposed. The proposed wear progress model of impact-fretting wear is as follows; oxide film breaking step at the initial stage, and layer formation step, energy accumulation step and finally particle torn out step which is followed by layer formation in the stable impact-fretting progress. The wear coefficient according to the work-rate model has been also compared with one between tube and support.