• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1823-1825
• /
• 2005

In this paper, we propose the system that can monitor and control the camera in the remote place using the PDA. The server PC attached to the PLC(Programmable Logic Controller) acquires the current status(On/Off) of the devices through the RS-232 serial communications. Also, the moving image frames captured from the wireless camera is compressed in the JPEG format and is stored in the server. The PDA, which is connected to the server through wireless internet, receives the data about the status of the devices and controls the devices according to the circumstances of them. Also, it can receive the images from the server simultaneously. So, we can monitor and control the specified area in the remote place using the PDA through the wireless communication.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.4
• /
• pp.384-390
• /
• 2005

This paper addresses the design and implementation of a wireless network. proposed as a cost-effective support platform for PLCs. With this network. one or more supervising stations may access remote equipment like PLCs. An applicable communication methods are described and we applied efficient method among them to PLCs communication. The paper specifies these requirements and indicates methods to fulfill them. Also. it provides to the model of operation, and focuses on the implementation approach. The hardware and software design is described together with a number of critical points related to wireless communication on the Cnet. Furthermore, a discussion on system expandability and performance is tackled and some observations are stated. The main conclusion is, that the proposed method can feature good performance under normal operating conditions.

• Fire Science and Engineering
• /
• v.11 no.2
• /
• pp.35-44
• /
• 1997

In this paper, I present an architecture and techniques to monitor and identify the hazards of plants anywhere in the whole country using the HTTP(Hypertext Transfer Protocol) based on RFC1945 and PLC(Programmable Logic Controller) protocol. I constructed the upward network and downward network for intercommunication between the PLC and computer around the internet. I also constructed WWW(World-Wide Web) server in the personal computer The result of this research constructed monitoring system to monitor and identify the hazards through WWW browser on the internet.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.595-598
• /
• 2014

원전 디지털 계측제어시스템에서 공통원인고장(Common cause failure)의 발생 가능성이 증가함에 따라 이를 방지하기 위해 프로그래머블 논리소자(Field Programmable Gate Array)를 이용한 제어기가 개발되어 활용되고 있다. 그러나, FPGA-기반의 제어기를 구현하는데 사용되는 하드웨어 기술 언어는 그래픽 언어를 이용한 PLC 기반의 개발을 하던 대부분의 원전 계측제어 엔지니어에게 친숙하지 않아 제어기의 구현에 어려움이 있다. 따라서 엔지니어에게 친숙한 그래픽 언어를 이용하여 FPGA 용 제어 프로그램을 작성할 수 있는 통합개발환경이 필요하다. 본 논문에서 구현한 VerilogLinker 는 제어프로그램의 개발을 위한 통합개발환경의 일부로 통합개발환경을 이용한 제어 프로그램의 개발과정 중에서 생성된 Verilog 파일을 FPGA 공급자가 제공하는 상용 소프트웨어인 Libero SoC 와 연결하는 기능을 제공한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.523-526
• /
• 2004

본 논문은 산업용 자동화기기에 사용되는 다수의 PLC(Programmable Logic Controller)를 모니터링하고 제어하기 위해, HMI(Human Machine Interface) 시스템에서 구동되는 저작 도구 응용프로그램을 설계 및 구현한다. HMI 저작 도구에서는 스크린이라는 가상화면 객체의 영역 안에서 태그라는 구성요소의 속성들을 편집하고 저장 및 전송하는 과정을 그래픽 화면을 통해 시각적으로 제공한다.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.29-38
• /
• 2018

Through process quality information, the time required for process quality analysis has been drastically shortened, the process defect rate has been reduced, and the manufacturing lead time has been shortened and the on-time delivery rate has been improved. Therefore, The purpose of this study is to develop a quality information analysis system model that effectively shortens the time required for process quality analysis in automobile safety belt parts manufacturing process. As a result of experiments on communication operation between manufacturing execution system (MES) quality server, injection machine control computer, injection machine programmable logic controller (PLC) and terminal, in analyzing quality information, the conventional handwriting input method took an average of 20 minutes, but the new multi-network method took about 2 minutes on average. In addition, the process defect rate was reduced by 13% and the manufacturing lead time was shortened from 28 hours to 20 hours. The delivery compliance rate improved from 96 to 99%.

• Computers and Concrete
• /
• v.24 no.5
• /
• pp.437-444
• /
• 2019

PLC and its expansion module, electric ball valve and cooling pipe, electric heating steel plate and various components of the system, which is used to control test and process data. By automatically adjusting the opening of the valve, the system makes the top temperature and cooling speed develop along the ideal temperature diachronic curve. Moreover, the system enables the temperature difference between inside and surface of test block limited in a given range by automatically controlling the surface board heating. The method of physical simulation test by sandbox with built-in cooling water pipe and heating rod is adopted. On the premise of a given standard value, the operation of the system is checked under different working conditions. Further, an extension of this system is proposed, which enables its application to obtain some thermal parameters when cooperating with numerical simulation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.501-503
• /
• 2013

This project presents a concept of mobile robots using prototypes, computing proposal oriented to embedded systems implementation. We implement our system using GPS module, Ultrasonic sensor(range sensors), H-bridge dual stepper control, DTMF(Dual-tone Multi-Frequency ) and LCD module. In this paper we construct a mechanical simple mobile robot model, which can measure the distance from obstacle with the aid of sensor and should able to control the speed of motor accordingly. Modules were interfaced with FPGA(Field Programmable Gate Array) controller for hardware implementation.

• Journal of Korea Multimedia Society
• /
• v.25 no.8
• /
• pp.1085-1096
• /
• 2022

The manufacturing industry is continuously pursuing advanced technology and smartization as it converges with innovative technology. Improvement of manufacturing productivity is achieved by monitoring, analyzing, and controlling the facilities and processes of the manufacturing site in real time through a network. In this paper, we proposed a new OPC-UA based digital twin model for smart factory facilities. A testbed system for USB flash drive packaging facility was implemented based on the proposed digital twin model and OPC-UA data communication scheme. Through OPC-UA based digital twin model, equipment and process status information is transmitted and received from PLC to monitoring and control 3D digital models and physical models in real time. The usefulness of the developed digital twin testbed system was evaluated through usability test.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.91-92
• /
• 2021

소비자들의 욕구 충족을 위하여 생산 제품이 다양해지고 있는 상황으로 소비자 맞춤형 생산이 이루어지고 있으나, 제조 현장에서는 운영자 및 작업자가 신속하게 제조 작업을 할 수 있는 시스템이 필요하다. 그러나 일반적으로 HMI와 같은 별도의 GUI 장치를 통하여 생산 내용의 변경이 가능하나, 작업자들은 이를 조작하여 PLC를 통한 생산에 적용하는데 많은 어려움을 겪고 있다. 본 논문에서는 단말기가 필요하지 않는 QR 코드를 기반으로 모바일 기기를 통하여 키오스크 기능을 제안한다. 제안 시스템은 모바일 디바이스를 통하여 검증된 생산 사양만을 선택할 수 있는 키오스크 화면을 구현한 것으로, PLC와 연동하여 즉각적으로 소비자가 필요로 하는 맞춤형 주문 생산이 가능할 것으로 기대된다.