• Journal of the Optical Society of Korea
• /
• v.7 no.2
• /
• pp.79-83
• /
• 2003

In this paper, we describe the fabrication process of a photonic crystal fiber and present the measured optical properties of the photonic crystal fiber. The fabrication of the photonic crystal fiber involves stacking, jacketing, collapsing, and drawing using a conventional drawing tower The photonic crystal fiber drawing needs higher tension to maintain the uniform air hole structure. Thus, the temperature of the photonic crystal fiber drawing is lowered by a few hundred degrees Celsius than for the case of conventional optical fiber drawing. The optical properties of the fabricated photonic crystal fiber such as mode profile, optical loss, transmission spectrum, bending loss, and polarization dependent loss are measured.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.76.3-76.3
• /
• 2019

Intracluster stars are believed to be gravitationally bound to a galaxy cluster, however, not to individual cluster galaxies. Their presence is observed as diffuse light typically in the central region extended from the brightest cluster galaxy. The diffuse light, often referred to as intracluster light (ICL), is difficult to quantify in distant high-redshift galaxy clusters because of the significant surface brightness dimming although ICL observations in high-redshift clusters provide powerful constraints on the origin of intracluster stars. In this poster, we present ICL study of the distant galaxy cluster SPT2106-5844 at z=1.132 with Hubble Space Telescope IR imaging data. With careful control of systematics, we successfully quantify the total amount of the ICL, measure the color profile, and obtain its two-dimensional distribution. Our measurement of the high abundance of the intracluster stars in this young cluster favors the ICL formation scenario, wherein production of intracluster stars are predominantly associated with the BCG formation.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.130-138
• /
• 1995

Machined graphite/epoxy surfaces were studied by using SEM (Scanning Electron Microscopy), surface profilometry and its analysis to determine suitable surface describing parameters for machined unidirectional and multidirectional laminate composite. The surface roughness and profile are found to be highly depdndent on the fiber layup direction and the measurement direction. It was possible to machine 90 .deg. and -45 .deg. plies due to the adjacent plies, which were holding those plies. It was found that the microgeometrical variations in terms of roughness parameters $R_{a}$ without $D_{y}$(Maximum Damage Depth) region and $D_{y}$are better descriptors of the machined laminate composite surface than commonly used roughness parameters $R_{a}$and $R_{max}$ The characteristics of surface profiles in laminate composite are well represented in CPD (Cumulative Probability Distribution) plot and PPD (Percentage Probability Density) plot. Edge-trimmed multidirectional laminate surfaces are Gaussian and random for profiles measured along the tool movement direction, they are periodic and non-Gaussian in the direction perpendicular to the tool movement.t.ent.t.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.42.2-42.2
• /
• 2021

Intraclusterlight (ICL) is diffuse light from stars that are bound to the clusterpotential, not to individual member galaxies. Understanding the formationmechanism of ICL provides critical information on the assembly and evolution ofthe galaxy cluster. Although there exist several competing models, the dominantproduction mechanism is still in dispute. The ICL measurement between z=1 and 2strongly constrains the formation scenario of the ICL because the epoch is whenthe first mature clusters begin to appear. However, the number of high-redshiftICL studies is small mainly because of observational challenges. In this study, based on deep HST WFC3/IR data, we measured ICL of 10 galaxy clusters atredshift beyond unity, which nearly doubles the sample size in this redshiftregime. With careful handling of systematics including object masking, skyestimation, flatfielding, dwarf galaxy contamination, etc., we quantified thetotal amount of ICL, measured the color profile, and examined the transitionbetween BCG and ICL.

• Applied Microscopy
• /
• v.51
• /
• pp.10.1-10.9
• /
• 2021

We investigate the sensitivity of symmetry quantification algorithms based on the profile R-factor (R_p) and the normalized cross-correlation (NCC) coefficient (γ). A DM (Digital Micrograph^©) script embedded in the Gatan digital microscopy software is used to develop the symmetry quantification program. Using the Bloch method, a variety of CBED patterns are simulated and used to investigate the sensitivity of symmetry quantification algorithms. The quantification results show that two symmetry quantification coefficients are significantly sensitive to structural changes even for small strain values of < 1%.

• Corrosion Science and Technology
• /
• v.8 no.2
• /
• pp.81-88
• /
• 2009

Chloride induced corrosion of steel reinforcement inside concrete is a major concern for concrete structures exposed to a marine environment. It is well known that transport of chloride ions in concrete occurs mainly through ionic/molecular diffusion, as a gradient of chloride concentration in the concrete pore solution is set. In the process of chloride transport, a portion of chlorides are bound in cement matrix then to be removed in the pore solution, and thus only the rest of chlorides which are not bound (i.e. free chlorides) leads the ingress of chlorides. However, since the measurement of free/bound chloride content is much susceptible to environmental conditions, chloride profiles expressed in total chlorides are evaluated to use in many studies In this study, the capacity of chloride binding in cement matrix was monitored for 150 days and then quantified using the Langmuir isotherm to determine the portions of free chlorides and bound chlorides at given total chlorides and the redistribution of free chlorides. Then, the diffusion of chloride ion in concrete was modeled by considering the binding capacity for the prediction of chloride profiles with the redistribution. The predicted chloride profiles were compared to those obtained from conventional model. It was found that the prediction of chloride profiles obtained by the model has shown slower diffusion than those by the conventional ones. This reflects that the prediction by total chloride may overestimate the ingress of chlorides by neglecting the redistribution of free chlorides caused by the binding capacity of cement matrix. From the evaluation, it is also shown that the service life prediction using the free chloride redistribution model needs different expression for the chloride threshold level which is expressed by the total chlorides in the conventional diffusion model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.30-38
• /
• 2009

In recent years, there's been strong demand for coastal structures that have a permeability that serves water affinity and disaster prevention from wave attack. The aim of this study is to examine the wave transformation, including wave run-up that propagates over the coastal structures with a steep slope. A numerical model based on the nonlinear shallow water equation, together with the unsteady nonlinear Darcy law for fluid motion in permeable underlayer and laboratory measurements was carried out in terms of the free surface elevations and fluid particle velocities for the cases of regular and irregular waves over 1:5 impermeable and permeable slopes. The numerical results were used to evaluate the application and limitations of the PBREAK numerical model. The numerical model could predict the cross-shore variation of the wave profile reasonably, but showed less accurate results in the breaking zone that the mass and momentum influx is exchanged the most. Except near the wave crest, the computed depth averaged velocities could represent the measured profile below the trough level fairly well.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.2
• /
• pp.229-235
• /
• 2017

Objective: This study was conducted to investigate the effect of dietary onion (Allium cepa) extract (OE) supplementation on growth performance, apparent total tract retention (ATTR), blood profile, carcass characteristics and meat quality in broilers. Methods: Four hundred male broiler chicks (Ross 308, 3-d old) were randomly allocated to four dietary treatments for 28 d feeding trial. Each treatment has five replications with 20 birds each. Four dietary treatments were designated according to the OE supplementation levels (0 as control, 5, 7.5, and 10 g of OE per kg of basal diet respectively). On d 28, a total of 20 birds from each treatment were subjected for ATTR, serum biochemical assay, carcass characteristic and organ weight measurement. Results: Overall weight gain of OE 7.5 g/kg group was higher (p = 0.04) than control group. The ATTRs of dietary energy (p<0.01) and ether extract (p = 0.04) linearly increased with increasing levels of dietary OE. However, no difference in ATTR of dry matter and crude protein was evident. Furthermore, serum IgG concentration increased linearly (p<0.01) and quadratically (p = 0.03) with increasing OE supplementation. No differences in carcass dressing weight and amount of abdominal fat by treatments were observed. Also, the weight of organ including immune organ was not different among the treatments. The TBARS values of 10 d stored breast meat decreased linearly (p<0.01) and quadratically (p<0.01) with increasing dietary OE levels. The meat color was also affected, with lower (p<0.01) redness score in meats from OE supplemented groups. This study showed that dietary OE improved broiler weight gain presumably by increasing feed intake and ATTR of both energy and ether extract. The dietary OE increased serum IgG level and meat anti-oxidation capacity. Conclusion: This study implies that the recommended level of dietary OE supplementation could be beneficial for improving broiler performance and meat quality.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1627-1627
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M^{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima t and the variation of full width at half maximum w were strongly dependent on the detection position and the wavelength of the laser beam. At, t and w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1626-1626
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M_{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima $\Delta$t and the variation of full width at half maximum Δw were strongly dependent on the detection position and the wavelength of the laser beam. At, $\Delta$t and $\Delta$w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.