• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.675-681
• /
• 2002

Parametric modeling and configuration design method are a important methods for rapid design in manufacturing. This paper proposes a relation rules which parametrically models a bonnet trimming tool based on Pro/Engineer. The concept of desogn is applied a trimming die of the bonnet outer panel. Trimming die have a many parameters. Each a parameter is related the die face and punch profile. A design system consists of a Pro/Engineer, a Pro/program.

• The Journal of the Korean dental association
• /
• v.16 no.5 s.108
• /
• pp.395-399
• /
• 1978

The patient, 21 years and 3 months female, complained of protrusion of lower face. There was severe procumbency of upper & lower anterior teeth. Cephalometric analysis revealed that the anteroposterior jaw relationship was normal, but the teeth was foreward on their respective basal bones, so diagnosed as bimaxillary dental prognathism. The patient underwent extraction of four Ist premolar and was treated with multibanded & direct bonding system. After 14 months, She gained good interdigitation of buccal segment and attractive facial profile.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.1-11
• /
• 2016

Purpose: The gear strength of a new mechanical transmission designed to increase the loading weight of small 4.8 kW tracked agricultural transporters was analyzed. Design improvements to increase the gear strength and reduce the gear weight were proposed after examining the parameters. Methods: Sixteen operators from three regions were surveyed to obtain the usage profile of small 4.8 kW transporters. Gear strength was evaluated by calculating contact stress and tooth root stress using commercial software following ISO 6336. Results: From the strength calculation for each gear pair, contact stress smaller than tooth root stresses were produced in all gear pairs. The safety factors in most cases exceeded 1.0, except in the case of gear pair II in group II. The design life of the transporter using gear pair II in group II was 42% under harsh conditions-thus, this design life needs improvement. A robust design was proposed by examining the relevant parameters (face width and profile shift coefficient) to increase the design life of the transporter. In addition, a lightweight design for gear pair I in group II that was considered overdesigned was proposed by examining the face width to reduce the weight of the drive gear by 42% and that of the driven gear by 30%. Conclusions: The Safety factor for the design life was examined through a gear strength analysis. After examining the relevant parameters, conditions for strength improvement were proposed to increase design life or adjust overdesigned gear. However, load conditions differ depending on the working conditions or user's preferences; therefore, it is necessary to conduct further studies in various regions.

• Journal of the Korean Society for Precision Engineering
• /
• v.3 no.3
• /
• pp.40-71
• /
• 1986

By developing a computer program for the systematic design of worm gears, the design formulae and tables of AGMA, JGMA, BS and DIN are analized and compared. The computer program can be used on micro-computers. According to the input data of the reduction ratio, the center distance. the driving torque and the material as design parameters, the program calculate the most efficient worm gear dimension. The variation of the design parameters and other empirical coefficients in case of resulting an inadequate design gear dimension can be easily modified throuth the way of interactive method between the user and the monitoring system of computer. A proposal of the standardization of worm gears was made in which a standard module according to the DIN 323 standard series number was applied. For the more exact and effective calculation of the stress concentration and the deformation of gear teeth, a computer program using the boundary element method is also developed. Even the strength of the special gear shape such as Niemann's "Cavex" gear can be calculated in a short CPU-time. The most effort of this study has been layed on the developing a computer program for the correction of a tooth profile and face width which is most important design factor for an exact and wide teeth contacts under loads, especially by great and wide gears. For this purpose were investigated the tooth stiffness, the mesh interferences and the kinematics and the dynamics of gear mesh. The deflection and the deformation of the gear shaft due to the loads acting on gear and shaft were aslo considered. Some examples have shown the sufficient good status of teeth contact in which the correction of the tooth profile and face width were accomplished due to the calculated results.d results.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.2
• /
• pp.489-494
• /
• 2015

Background: Once limited with face-to face courses, health education has now moved into the web environment after new developments in information technology This study was carried out in order to give training to the university academic and administrative female staff who have difficulty in attending health education planned for specific times and places. The web-supported training focuses on healthy diet, the importance of physical activity, damage of smoking and stress management. Materials and Methods: The study was carried out in Sakarya University between the years 2012-2013 as a descriptive and quasi experimental study. The sample consisted of 30 participants who agreed to take part in the survey, filled in the forms and completed the whole training. The data were collected via a "Personel Information Form", "Health Promotion Life-Style Profile (HPLSP)", and "Multiple Choice Questionnaire (MCQ). Results: There was a statistically significant difference between the total points from "Health Promotion Life-Style Profile" and the total points from the sub-scale after and before the training (t=3.63, p=0.001). When the points from the multiple choice questionnaire after and before training were compared, it was seen that the average points were higher after the training (t=8.57, p<0.001). Conclusions: It was found that web-supported health training has a positive effect on the healthy living behaviour of female staff working at a Turkish university and on their knowledge of health promotion.

• The Journal of Korean Association of Computer Education
• /
• v.18 no.6
• /
• pp.43-51
• /
• 2015

In this paper, we develops the hybrid career coaching model combined the face to face and the E-coaching, and applies students of childhood education for career guidance. The presented hybrid career coaching manages a profile and state information and a remote access between the coach and coachee on Internet. Then, online part of hybrid coaching deals with saving the data, and understand of the situation of the coachee if it is necessary. And face to face part of hybrid coaching have a conversation, the checking, counsel and introspection if the coach needs. Presented hybrid career coaching model has th procedure of 6 steps such like career coaching guidance, self-understanding, career decision-making, establishment of the career execution planning, execution plan and action will inspection and execution result inspection. Proposed hybrid career coaching is possible to understand coachee's current state on the career map, realize the importance of the execution strategy and maximize the efficiency and effectiveness self-regulation capacity.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.174-181
• /
• 2005

Understanding the level of a person's perception of changes that have occurred on the face after orthodontic treatment is critical to the process of orthodontic diagnosis and treatment planning. The purpose of this study was to determine the level of perception of profile and frontal changes in lower facial height. Forty students attending art school participated in a study evaluating the level of a participant's perception of changes in the lower facial height. Participants compared computer-graphic frontal and profile photographs with balanced proportions and photograph simulations of 1, 2, 3, and 4mm changes in lower facial height from stomion to the chin. At least a 2 mm change in lower facial height for the profile view and 3mm in the frontal view was needed to be perceived after orthodontic treatment. The level of a person's perception of the change in lower facial height was more sensitive in the profile view than in the frontal view, and information about facial changes given prior to evaluation enhanced the level of perception.

• The korean journal of orthodontics
• /
• v.21 no.1 s.33
• /
• pp.131-170
• /
• 1991

This study was designed to analyze morphological characteristics of Korean young adults, norms and standard deviation of variables, sexual differences, correlationship between each area of face and correlationship between hard tissue and soft tissue. The primary sample consisted of 45 males and 57 females who were early and middle twenties and had acceptable profile, no history of previous orthodontic treatment, absence of remarkably large overjet and overbite, full complement of permanent teeth, Class I skeletal and dental relationships and good vertical facial proportions. Their cephalograms were analyzed morphologically with a computer morphometrics. Then the final sample - 25 males and 38 females - were selected within 1 S.D. of E-line, ANB, P/A facial height ratio, Interincisal angle, L1 to A-Pog, ODI and APDI. The results of the study were as follows: 1 In the form and proportion of facial skeleton there were no significant differences between males and females, but in the size males were larger than females. 2. The dental protrusion patterns had no significant sexual difference and no significant correlationship between protrusion of upper lip and inclination of upper incisor. But mentolabial angle had positively correlated with interincisal angle and negatively with inclination of upper and lower incisor. 3. In the relationship between nose and soft-tissue profile, males were larger than females in nasal length, height and angular measurements. 4. In analysis of soft-tissue profile, males were larger than females in the length and thickness. In the angular measurements and proportion of soft-tissue profile, there were no significant differences between males and females.

• Journal of Gifted/Talented Education
• /
• v.19 no.2
• /
• pp.241-260
• /
• 2009

The purpose of this study was to contrast young gifted children with ordinary young children in K-ABC profile. The subject were 51 young gifted children and 51 ordinary young children, 2 to 4 years of age. Data of children's K-ABC profile were analyzed by Correlation and Crosstabs. The main results of this study were as follows: First, in the case of ordinary young children, there were significant positive correlation among 'Mental Processing Composite' and all sub-tests of mental processing composite except 'face memory' test, 'Achievement Scale'. In young gifted children, there were significant positive correlation among 'Mental Processing Composite' and just four sub-tests of mental processing composite, and there were no significant correlation between 'Mental Processing Composite' and 'Achievement Scale'. Second, there were no significant differences among all sub-tests' strength and weakness in young gifted children and ordinary young children. Third, young gifted children got higher score in 'Sequential Processing Scale' and 'Mental Processing Composite' than 'Achievement Scale'. But in ordinary young children, there were no significant differences among all K-ABC' sub-scales.

• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.201-218
• /
• 1989

This study was focused on the distribution of different facial types of the Class II division I malocclusion groups and skeletal characteristics of the each group and those that anteropsterior relationship of the maxilla and mandible calculated from the analysis of ANB angle and Wits appraisal was quite different from each other, as well. Cephalometric headplates of 140 persons of Class II division 1 malocclusion whose mean age was 11.2 years and 69 persons of normal occlusion whose mean age was 12.2 years were utilize as materials. Measurements were recorded, tabulated and statistically analyzed employing the tracings of the lateral cephalograms, then Class II division 1 malocclusion group was divided into 9 Types according to the angle of SNA and SNB for the anteroposterior relationship of the maxilla and mandible, another 9 Types according to the FH-NPog and SN-MP for the horisontal and vertical relationship, and the other 9 Types according to the ANB and Wits appraisal for intermaxillary relationship as well, with which was based on $Mean{\pm}$ 1SD of those of normal occlusion. The result allowed the following conclusion: 1. $37.1\%$ of population demonstrated maxilla within nounal range and retrognathic mandible to the cranial base, $30\%$ for both maxilla and mandible within normal range, $20\%$ for retrognathic maxilla and mandible and $12.9\%$ of the rest were ananged in Class II division 1 maloccusion groups. 2. Retrognathic mandible and hyperdivergent face accounted for $30.7\%$, mesognathic mandible and neutrodivergent face for $29.3\%$, mesognathic mandible and hyperdivergent face for $16.4\%$, retrognathic mandible and neutrodivergent face for $13.6\%$, mesognathic mandible and hypodivergent face for $10\%$ of population were computed in Class II division 1 malocclusion groups. 3. It was suggested that skeletal Class II malocclusion might be due to anomaly in size and shape of cranial base, underdevelopment of mandible, retropositioning of mandible, underdevelopment of posterior face against anterior face, or any combination of these factors. 4. Population with underdevelopment and / or retropositioning of the mandible showed hyperdivergent tendency of facia profile. 5. The ANB angle and Wits appraisal did not coincide the severity of anteroposterior dysplasia in $35.7\%$ of Class II division 1 malocclusion group each other, and this inconsistency was suggested to be related with mandibular rotation, inclination of cranial base, and anteroposterior position of the maxilla.