• Title/Summary/Keyword: profile face

Search Result 192, Processing Time 0.038 seconds

Vacuum Drying Characteristics Using Different Heating Methods for Douglas-fir Timber (미송 대단면재의 가열법에 따른 진공건조 특성)

  • Jung, Hee-Suk;Eom, Chang-Deuk;So, Bum-Joon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.32 no.4
    • /
    • pp.18-26
    • /
    • 2004
  • Timbers of 14 by 14 cm, 2.4 m long, were dried in a vacuum kiln to investigate vacuum drying characteristics using three types of heating methods, conduction heating with hot plate, the radio frequency (RF) heating and the combination of both (hybrid heating). Average drying rate is the highest for the hybrid heating and the lowest for the RF heating. Average specific energy is the highest for the RF heating and the lowest for conduction heating. Transverse moisture content distribution of dried timber revealed the convex profile for both conduction and the hybrid heating and moisture content increased from one face to the opposite face for the RF heating. Moisture content distribution along the length of timber increased from the end to the middle of timber length for conduction and the hybrid heating and decreased from the end to the middle of timber length for the RF heating. End- and surface checks for conduction heating were severer than the other heating methods. No internal check occurred in any heating methods. Drying characteristics of conduction heating showed in-between trend of the RF and the hybrid heating.

A ROENTGENOCEPHALOMETRIC STUDY ON SOFT TISSUE PROFILE CHANCES IN PRE-POST TREATMENT OF ANGLE'S CLASS II DIVISION 1 MALOCCLUSION (Angle씨 제 2 급 1류 부정교합환자 치료 전후의 안모 연조직 변화에 관한 두부방사선 계측학적 연구)

  • LEE, Y.W.;Sohn, Byung Hwa
    • The korean journal of orthodontics
    • /
    • v.13 no.2
    • /
    • pp.193-199
    • /
    • 1983
  • The purpose of orthodontic treatment is to produce functional occlusion and to create or maintain facial esthetic harmony. The soft-tissue covering of the face also plays an important role in facial esthetics, speech and other physiologic functions. The study of the soft-tissue profile is important for the planning of orthodontic treatment. The author studied cephalometric X-ray films on 49 patients (23boys, 26 girls) with Angle's class II division 1 malocclusion, ranged from 9 to 13 years of age. Roentgenocephalmetric X-ray films were taken pre and post orthodontic care. Tracings were made in usual manner. The obtained results were as follow. 1. There was no significant sexual difference on mean changes. 2. In the comparison of the soft-tissue thickness changes, Ls-Ls' and Si-Si' in male subjects were remarkable. 9. There were significant correlations between osseous (Ss') change and soft-tissue (Ss) chang, of maxilla in male and female subjects subsequent to orthodontic treatment. 4. The ratios between the protraction of the Ss' and that of the Ss were 1:1.5 in all sexes, the ratios between the Si' and that of the Si were 1:1.4 in male and 1:1.2 in female. 5. There were significant correlations between maxillary central incise. angulation change $({\angle}A)$ and upper lip inclination change $({\angle}B)$ in all sexes. 6. There were little correlations between change in distance difference of Is and Ii and change in distance difference of Ls and Li in all sexes in all sexes.

  • PDF

Documentation of Physiological Parameters and Blood Profile in Newly Born Kajli Lambs

  • Saddiqi, H.A.;Nisa, M.;Mukhtar, N.;Shahzad, M.A.;Jabbar, A.;Sarwar, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.24 no.7
    • /
    • pp.912-918
    • /
    • 2011
  • Newly born lambs have to face challenges in a new environment totally different from that of the uterus. Adaptation to extra-uterine life involves functional changes with almost each organ and system in the body undergoing a series of metabolic and anatomical modifications. Failure to adapt the extra-uterine environment can not only lead to homeostatic disturbances but also lead to the death of the affected lambs. Hematological parameters of newly born lambs show variability that differs between breeds of lambs. The purpose of present study was to determine homeostatic responses and physiological reference values in Kajli breed lambs occurring in the neonatal period through changes in blood profile, respiratory rate, heart rate, live weight and rectal, scrotal and skin temperatures. For this purpose, sixteen clinically fit lambs (males = 10 and females = 6) with a mean body weight $6.92{\pm}0.46$ kg were selected. Physiological data of selected parameters of each Kajli lamb was recorded at three day intervals and hematological parameters at five days for a period of 30 days. In general, statistical analysis showed a significant effect of time (p<0.001) on all the studied physiological and hematological parameters except platelets counts, white blood cells and hemoglobin concentration. The results documented in the current study are an addition to existing knowledge of the physiology of Kajli sheep breed should be helpful in developing feeding, disease diagnoses and treatment protocols for newborn Kajli stock.

Application of time-of-flight near infrared spectroscopy to Satsuma mandarin

  • Tsuchikawa, Satoru;Ito, Satomi;Inoue, Kinuyo;Miyamoto, Kumi
    • Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
    • /
    • 2001.06a
    • /
    • pp.1627-1627
    • /
    • 2001
  • In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M^{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima t and the variation of full width at half maximum w were strongly dependent on the detection position and the wavelength of the laser beam. At, t and w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

  • PDF

Application of time-of-flight near infrared spectroscopy to Satsuma mandarin

  • Tsuchikawa, Satoru;Ito, Satomi;Inoue, Kinuyo;Miyamoto, Kumi
    • Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
    • /
    • 2001.06a
    • /
    • pp.1626-1626
    • /
    • 2001
  • In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M_{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima $\Delta$t and the variation of full width at half maximum Δw were strongly dependent on the detection position and the wavelength of the laser beam. At, $\Delta$t and $\Delta$w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

  • PDF

A 6 m cube in an atmospheric boundary layer flow -Part 2. Computational solutions

  • Richards, P.J.;Quinn, A.D.;Parker, S.
    • Wind and Structures
    • /
    • v.5 no.2_3_4
    • /
    • pp.177-192
    • /
    • 2002
  • Computation solutions for the flow around a cube, which were generated as part of the Computational Wind Engineering 2000 Conference Competition, are compared with full-scale measurements. The three solutions shown all use the RANS approach to predict mean flow fields. The major differences appear to be related to the use of the standard $k-{\varepsilon}$, the MMK $k-{\varepsilon}$ and the RNG $k-{\varepsilon}$ turbulence models. The inlet conditions chosen by the three modellers illustrate one of the dilemmas faced in computational wind engineering. While all modeller matched the inlet velocity profile to the full-scale profile, only one of the modellers chose to match the full-scale turbulence data. This approach led to a boundary layer that was not in equilibrium. The approach taken by the other modeller was to specify lower inlet turbulent kinetic energy level, which are more consistent with the turbulence models chosen and lead to a homogeneous boundary layer. For the $0^{\circ}$ case, wind normal to one face of the cube, it is shown that the RNG solution is closest to the full-scale data. This result appears to be associated with the RNG solution showing the correct flow separation and reattachment on the roof. The other solutions show either excessive separation (MMK) or no separation at all (K-E). For the $45^{\circ}$ case the three solutions are fairly similar. None of them correctly predicting the high suctions along the windward edges of the roof. In general the velocity components are more accurately predicted than the pressures. However in all cases the turbulence levels are poorly matched, with all of the solutions failing to match the high turbulence levels measured around the edges of separated flows. Although all of the computational solutions have deficiencies, the variability of results is shown to be similar to that which has been obtained with a similar comparative wind tunnel study. This suggests that the computational solutions are only slightly less reliable than the wind tunnel.

Evaluation of Abrasive Wear Face Using SAW (표면탄성파를 이용한 마모 표면부의 평가)

  • Kwon, Sung-D.;Yoon, Seok-S.;Song, Sung-J.;Lee, Young-Z.
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.22 no.2
    • /
    • pp.193-197
    • /
    • 2002
  • The frequency dependency of the Rayleigh surface wave was investigated indirectly by measuring the angular dependency of the backward radiation of the incident ultrasonic wave in the abrasion specimens, which was explained in view of the residual stress distribution. The peak intensity of the backward radiation profile decreased and the right half width of the profile increased with an increase of the variational rate of residual stress for the scuffing specimen. The peak intensity was also affected by the surface wave scattering during the propagation around the micro-damages. The peak angle might depend on not only the amount of residual stress but also the micro-structure. The result observed in this study demonstrates the high potential of the backward radiated ultrasound as a tool for the nondestructive evaluation of the subsurface gradients of materials.

A case of idiopathic thrombocytopenia in a Yorkshire terrier dog (개 특발성 혈소판감소증 1례)

  • Kim, So-La;Cho, Chang-Seok;Kim, Min-Jae;Kang, Tae-Young;Lee, Joo-Myoung;Park, Hyun Jung;Cheong, Jongtae;Lee, Kyoung-kap;Yun, Young-min
    • Korean Journal of Veterinary Research
    • /
    • v.47 no.4
    • /
    • pp.475-478
    • /
    • 2007
  • A 4-year-old spayed female, Yorkshire terrier dog with a history of petechial and ecchymotic hemorrhages on the face, trunk and hind limb was referred to Veterinary Medical Teaching Hospital, Cheju National University. The complete blood count revealed a marked thrombocytopenia ($96{\times}10^3/{\mu}l$). The biochemical profile showed only slightly increased glucose. The coagulation profile such as prothrombin time and activated partial thromboplastin time, was within the reference range. In Giemsa staining, there were no endoparasites like as Babesia spp. on the RBC. This case was diagnosed as a idiopathic thrombocytopenia in a Yorkshire terrier dog. She was treated with prednisone (1 mg/kg BW, IM q 12 h) and cephalosporin (10 mg/kg BW, IM, q 12 h). When rechecked on day 6, the platelet was within reference range ($507{\times}10^3/{\mu}l$) and also petechial and ecchymotic hemorrhages on the body were gradually improved without any complications. The dose of prednisone was decreased to 0.5 mg/kg BW, q 24 h. On day 17, we finished treatment because all the clinical signs, blood and serum chemistry were reference range and platelet count was dramatically increased.

Diagnosis, Treatment and Clinical Features of Cutaneous Leishmaniasis in Saudi Arabia

  • Hawash, Yousry A.;Ismail, Khadiga A.;Abdel-Wahab, Maha M.;Khalifa, Mahmoud
    • Parasites, Hosts and Diseases
    • /
    • v.56 no.3
    • /
    • pp.229-236
    • /
    • 2018
  • Cutaneous leishmaniasis (CL) has been one of the most common parasitic diseases in Saudi Arabia. This study exhibits the clinical features, diagnosis, cytokine profile and treatment of CL patients in Al-Taif province. Ninety CL suspects at a tertiary care general hospital were enrolled in one-year study. Patients were interviewed, clinically-examined, and subjected to laboratory tests: skin scraping smear microscopy, OligoC-TesT commercial PCR (Coris BioConcept) and kinetoplast DNA (kDNA) PCR for Leishmania diagnosis. Interferon-gamma (RayBio; Human $IFN-{\gamma}$ ) and nitric oxide (NO) levels in patients' sera were evaluated before treatment with sodium stibogluconate (pentostam) with 20-day intramuscular drug regimen. Positive rates of microscopy, commercial PCR and kDNA PCR were 74.4%, 95.5% and 100%, respectively. Patients came to hospital mostly in winter (45.0%). CL was frequently exhibited in Saudi patients (78.8%), male gender (70.7%), age <20 years (50.0%), rural-dwellers (75.5%) and patients with travel history (86.6%). Lesion was mostly single ulcer (93.3%), occurred in the face (67.7%). Upon pentostam treatment, 85.1% of ulcers showed rapid healing signs. Levels of $IFN-{\gamma}$ and NO were significantly higher in the healing than the non-healing cases (P<0.001). The kDNA PCR proved more sensitive than microscopy and OligoC-TesT commercial PCR. Our results open perspectives for $IFN-{\gamma}$ use as a biomarker predicting treatment response.

Comparison of Drying Characteristics of Square Timber by Heated Platen and Radio-frequency/Vacuum Drying (큰 정각재의 가열판과 고주파 진공건조간 건조특성의 비교)

  • Jung, Hee-Suk;Kang, Wook;Lee, ChuI-Hyun
    • Journal of the Korean Wood Science and Technology
    • /
    • v.30 no.2
    • /
    • pp.108-114
    • /
    • 2002
  • Red pine(Pinus densiflora) square timbers with 14.0 cm and 16.5 cm of face size and 24 m long were dried in a vacuum-press kiln and in a radio-frequency/vacuum(RF/V) kiln to compare drying rate, moisture content(MC) distribution and specific energy. RF/V drying rate was higher than vacuum-press drying rate. The effect of size of cross section on the RF/V drying rates were more pronounced than those of vacuum-press drying. The longitudinal- and the transverse MC distribution of dried square timber showed convex profile for the vacuum-press drying and concave profile for the RF/V drying. Moisture gradient of width direction was similar to the thickness direction in vacuum-press dried square timber and was more slight than that of the thickness direction in the RF/V dried large square timber. The specific energy consumption curve increased as MC decreased. Specific energy(kWh/kg of water evaporated) of the vacuum-press process required more than that of the RF/V process.