• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.12 no.3
• /
• pp.49-56
• /
• 1990

Facial balance is the primary detevminant of good facial esthetics and is expressed externally by the shape of facial soft tissues. Balance of the facial skeleton is most important in prediction of orthognathic surgery, however, it is not alwags coincided to soft tissue balance because the soft tissue drapes overlying hard tissue varies in thickness and tones from case to case. So, soft tissue facial balance and esthetics also should always be considered in prediction of hard tissue changes preoperatively. The chin has a paramount importance in the overall appearance of the face and facial profile because it may express individual charactor or image. Therefore positional change of the chin must be considered in any cases as the last and important option to give an overall soft tissue balance. Two cases were referred from orthodontists only for anterior segmental of teortomuy of the chin. Pre-operative evaluation showed poor soft tissue chin profiles which were not coincided to hard tissue chin balance. We altered surgical plans to fulfill balancing soft tissue profile and then could improve overall esthetics after surgery.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.1951-1962
• /
• 1993

The creation process of a typical machined surface is treated here as a dynamic system. An investigation is carried out to establish a relationship between the characteristics of cutting force fluctuations that cause vibration response of the tool-workpiece system and the formation of surface in face cutting by sintered carbide cutting tool. Cutting force is measured and analyzed in frequency domain. The power spectral densities of cutting force give a useful information in surface generation and it can be used to find out the control factor of surface roughness. The terms, PSD ratio & Normalized spindle frequency PSD, are defined and when the value of power in spindle frequency is absolutely little but relatively large, it is obtained high accuracy surface roughness. The aim of this research is to find surface profile by measured and analyzed cutting force signals. The simulation of surface generation gives the comprechension of its mechanism and help to predict and control the surface quality. In this study, it is suggested what informations about surface generation can be acquired from the cuttuing force signal and an way of generating a better surface.

• The korean journal of orthodontics
• /
• v.19 no.2
• /
• pp.95-108
• /
• 1989

This study intended to calculate the cephalometric norms of Korean adult and to compare those with norms of the North American Caucasian by Moyers. Cephalometric headplates of 41 males and 31 females ranged in age from eighteen to twenty-six with normal occlusion and pleasing face were employed for this investigation. The tracings of the standard lateral cephalograms were analyzed by Moyers' method. As a result of this study, the following conclusion can be made. 1. Norms of Korean adult male and female were calculated. 2. There was no significant sexual difference in the basic craniofacial morphology. 3. The size of craniofacial skeleton was larger in male than in female. 4. The Korean male showed lower value of mandibular plane angle to craial base than that of the Caucasian male. 5. There was no significant difference in the anterior total facial height, however, in the posterior facial height the Korean male was larger than the Caucasian male, which manifested that the Korean male held more square-shaped profile. 6. The anteroposterior length of anterior and posterior cranial base, maxillary and mandibular skeletal and dentoalveolar effective length of the Korean male were shorter than those of the Caucasian male, and this suggested that the craniofacial profile depth of the Korean male was shorter than that of the Caucasian male.

• Archives of Craniofacial Surgery
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2015

Facial symmetry is an important component of attractiveness. However, functional symmetry is favorable to aesthetic symmetry. In addition, fluctuating asymmetry is more natural and common, even if patients find such asymmetry to be noticeable. However, fluctuating asymmetry remains difficult to define. Several studies have shown that a certain level of asymmetry could generate an unfavorable image. A natural profile is favorable to perfect mirror-image profile, and images with canting and differences less than $3^{\circ}-4^{\circ}$ and 3-4 mm, respectively, are generally not recognized as asymmetry. In this study, a questionnaire survey among 434 medical students was used to evaluate photos of Asian women. The students preferred original images over mirror images. Facial asymmetry was noticed when the canting and difference were more than $3^{\circ}$ and 3 mm, respectively. When a certain level of asymmetry is recognizable, correcting it can help to improve social life and human relationships. Prior to any operation, the anatomical component for noticeable asymmetry should be understood, which can be divided into hard tissues and soft tissue. For diagnosis, two-and three-dimensional (3D) photogrammetry and radiometry are used, including photography, laser scanner, cephalometry, and 3D computed tomography.

• Geomechanics and Engineering
• /
• v.31 no.4
• /
• pp.375-384
• /
• 2022

The variation of the undrained shear strength (c_u) is an important consideration for assessing slope stability in engineering practice. Previous studies focused on the three-dimensional (3D) stability of slopes in normally consolidated clays generally assume the undrained shear strength increases linearly with depth but does not vary in the horizontal direction. To assess the 3D stability of slopes with spatially varying undrained shear strength, the kinematic approach of limit analysis was adopted to obtain the upper bound solution to the stability number based on a modified failure mechanism. Three types failure mechanism: the toe failure, face failure and below-toe failure were considered. A serious of charts was then presented to illustrate the effect of key parameters on the slope stability and failure geometry. It was found that the stability and failure geometry of slopes are significantly influenced by the gradient of c_u in the depth direction. The influence of c_u profile inclination on the slope stability was found to be pronounced when the increasing gradient of c_u in the depth direction is large. Slopes with larger width-to-height ratio B/H are more sensitive to the variation of c_u profile inclination.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.461-471
• /
• 2005

The purpose of this study is to develop soft tissue cephalometric standards in children with normal occlusion and to determine the differences between males and females and the differences according to age ranges of 9, 10 and 11 years. The lateral cephalometric radiographs of 169 children(82 boys, 87 girls) among the contestants in 2000-2004 Healthy Dentition Contest in Seoul were studied with several soft tissue profile analyses and cephalometric means and following results were obtained. 1. The sex differences were not statistically significant between males and females soft tissue parameters except for two soft tissue parameters(p>0.05). 2. Females had relatively more protrusive lower lip relative to the H line than males and middle third face height to lower third face height of females was larger than males(p<0.05). 3. The age differences in soft tissue parameters were not statistically significant according to age ranges of 9, 10 and 11 years(p>0.05).

• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.565-606
• /
• 1993

The purpose of this study was to evaluate the change of before and after treatment of anterior openbite malocclusions treated by Multiloop Edgewise Archwire technique. The openbite sample consisted of 4 male and 12 female adults, treated with nonextraction or third molar extraction. The normal sample consisted of 58 subjects, which have pleasing facial profile and normal occlusion and no experience of orthodontic or prosthodontic treatment. The 58 subjects of normal sample were subdivided by cephalemetric vertical relationship of face. The 40 subjects, cephalometric vertical relationship of face was in normal range, classified as Normal Sample group 1. The 18 subjects, increased cephalometric vertical relationship of face, classified as Normal Sample group 2. The computerized cephalometric analysis was accomplished with 50 reference points for 22 skeletal measurements, 46 dentoalveolar measurements, 8 soft tissue measurements. Statistical analysis of the data was carried out with paired t-test, Student's t-test, and DUNCAN test using SAS(PC version), The results were as follows : 1. There were no statistically significant differences in skeletal measurement between before and after treatment. The major changes were in dentoalveolar region. 2. After treatment, the long axis of maxillary and mandibular posterior teeth were distally tipped-back, and uprighted to bisected occlusal plane. The interincisal angle was increased. 3. There were no statistically significant increase in the upper posterior dental height and statistically significant decrease in the lower posterior dental height. The upper anterior dental height was increased, but there was no statistically significant increase in the absolute upper anterior dental hight. The lower anterior dental height was increased. 4. After treatment, the maxillary occlusal plane to palatal plane angle and the mandibular occlusal plane to mandibular plane angle were statistically significant increased. Then, there were no statistically significant difference between after treatment group and normal sample group 2. 5. After treatment, the percentage of upper lip length to upper anterior dental height was decreased. Then, There were no statistically significant difference between after treatment group and normal sample group 2.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.1
• /
• pp.103-114
• /
• 1993

The purpose of this study was to determine whether any difference existed in craniofacial morphology between parents of children with cleft lip and/or palate and parents of children without cleft lip and/or palate as well as the characteristics of craniofacial morphology in parents of children with cleft lip and/or palate. Thirty three measurements of the various regions of cranium and face were obtained from lateral cephalometric radiograms in parents of 28 children with cleft lip and palate, 18 children with cleft lip, and 22 children with cleft palate. There were 28 couples and 40 single parents in this sample. There were 92 individuals including 41 males and 51 females. The measurements were compared with those in control subjects, including 40 adult males and 40 adult females, who had no history of craniofacial abnormalities. The total sample was compared for the sex independently. The obtained results were as follows. 1. In the cranium, both parents of cleft children had significantly shorter posterior cranial base length(S-Ba). 2. In the upper face, a significantly shorter anteroposterior length of maxilla(A'-Ptm'), particularly in the anterior region (A'-K), anterior facial depth(A-SBaL), posterior facia! height(Ptm'-SNL) and relation of subnasale to the cranial base (∠BaN'Sn) were noted in fathers of cleft children. But, all measurements were not found to be significantly different between experimental group and control group in all mothers. 3. In the lower face, both parents of cleft children showed a significantly greater Y axis angle(∠NSGn) and ramal plane angle(∠SNL-RP) in fathers of cleft children. Thus both patents showed a posteriorly rotation of mandible. The thickness of the lower lip(B-B') was significantly thicker in fathers of cleft children. 4. In the facial profile, a significantly shorter posterior facial height(S-Go) and greater angle of soft tissue facial convexity (∠BaN'Pog') were noted in the fathers of cleft children. But, all measurements were not found to be significantly different between experimental group and control group in all mothers.

• The korean journal of orthodontics
• /
• v.48 no.1
• /
• pp.23-29
• /
• 2018

Objective: In accordance with the changing demographics in the United States, orthodontists working on various ethnic populations should be more conscious when using the standardized profile analyses for the African American patient. The objective of this study was to examine whether the perception of lip protrusiveness in modern African American faces has changed. For this purpose, we investigated the most favorable African American lip profile using the opinions of 10 experienced and 10 newly trained younger orthodontists. Methods: Attractiveness was converted to a number on visualized analog scales. Comparative ranks on 16 African American profiles, with focus on lip protrusiveness and thickness, were made among the groups. Mixed-effects linear regression models were fit and group differences were estimated. Results: Younger orthodontists favored a more protrusive lip profile, and the variance in their perceptions was narrower than those of older orthodontists. Measurements related to upper lip protrusion showed the strongest correlation to attractiveness (r = -0.82). The association with attractiveness decreased linearly as the protrusiveness of the upper lip increased. Steiner's E-line was the most influential reference for determining the level of attractiveness for the older orthodontists, whereas upper lip protrusion was the most influential factor for the young orthodontists. Conclusions: An adequate level of lip protrusiveness and thickness should be essential for maintaining attractive esthetics in African American patients. Yet, a new set of standards for prominent lips in this population is necessary to reflect the current trend in the concept of a beautiful face in the modern world.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1531-1533
• /
• 2016

Background: Polycythaemia rubra vera (PV) is a Philadelphia chromosome negative myeloproliferative neoplasm characterized by increased red cell production, independent of the mechanisms that regulate normal erythropoiesis. The aim of this study was to analyze the clinico-epidemiological profile of Pakistani patients with PV. Materials and Methods: In this retrospective cross sectional study, 26 patients with PV were enrolled from January 2010 to December 2014. They were diagnosed based on WHO criteria. Results: The mean age was $53.4{\pm}9.31years$ (range 36-72) and the male to female ratio was 2:1. Overall 30.7% of patients were asymptomatic. In symptomatic patients, major complaints were headache (30.8%), abdominal discomfort (23.1%), blurred vision (15.3%), pruritus (11.5%) and vascular incidents (11.5%). Physical examination revealed plethoric face and splenomegaly as predominant findings, detected in 34.6% and 30.7%, respectively, with the mean splenic span of $15.9{\pm}2.04cm$. The mean hemoglobin was $18.1{\pm}1.9g/dl$ with the mean hematocrit of $55.6{\pm}8.3%$. The mean total leukocyte count was $12.8{\pm}7.1{\times}10^9/l$ and the platelet count $511{\pm}341.9{\times}10^9/l$. Mean erythrocyte sedimentation rate was $3.5{\pm}1.22mm/hr$. Serum lactate dehydrogenase, serum creatinine and uric acid were $552.7{\pm}309.2$, $0.8{\pm}0.17$ and $6.60{\pm}1.89$ respectively. Conclusions: PV in Pakistani patients, unlike in the West, is seen in a moderately young population. The disease is frequently seen in male gender and primarily patients present with symptoms related to hyperviscosity.