• Tribology and Lubricants
• /
• 제30권2호
• /
• pp.86-91
• /
• 2014

This paper presents a design procedure for a face gear and pinion used in a handpiece with a $160^{\circ}\acute{y}$ contra angle and 1:2 gear ratio. Based on the geometric theory of gearing, the tooth profile of the face gear and pinion is developed. To analyze the contact pressure, the gear profile should be determined before calculating the stress between the two gears. The concept of calculating the face gear profile is that it can be generated by the coordinate transformation of the shaper profiles, which have involute curves, using a simulation method from the gear manufacturing process.

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.239-244
• /
• 2016

Mugshot face images, routinely collected by police, usually contain both frontal and profile views. Existing automated face recognition methods exploited mugshot databases by enlarging the gallery with synthetic multi-view face images generated from the mugshot face images. This paper, instead, proposes to match the query arbitrary view face image directly to the enrolled frontal and profile face images. During matching, the 3D face shape model reconstructed from the mugshot face images is used to establish corresponding semantic parts between query and gallery face images, based on which comparison is done. The final recognition result is obtained by fusing the matching results with frontal and profile face images. Compared with previous methods, the proposed method better utilizes mugshot databases without using synthetic face images that may have artifacts. Its effectiveness has been demonstrated on the Color FERET and CMU PIE databases.

• 한국멀티미디어학회논문지
• /
• 제7권4호
• /
• pp.474-483
• /
• 2004

본 논문에서는 3차원 정면 얼굴 영상으로부터 추출된 프로파일(profile) 영상을 깊이 정보가 반영된 가중치 하우스도르프 거리(weighted hausdorff distance-WHD)를 이용하여 두 영상을 비교하는 인식 알고리즘을 제안한다. 3차원 얼굴 영상은 2차원과 달리, 깊이 정보를 가지고 있으므로 사람 얼굴의 프로파일 영상을 보다 정확하게 그리고 다양한 얼굴 위치에서 추출되어 질 수 있다. 코는 얼굴에서 가장 돌출된 형상을 가지고 있으므로, 3차원 데이터의 깊이 값을 평균을 이용한 반복 선택 방법을 사용하여 코의 정점 위치를 찾는다. 이를 기준점으로 수직성분들의 깊이 값을 2차원 평면으로 나타내면 프로파일 영상이 추출된다. 입력 영상과 데이터베이스 영상과의 유사도 비교를 위해, 깊이정보를 가중치로 사용한 WHD방법으로서 두 프로파일 영상의 거리비교는 Ll을 이용하여 비교하였다. 제안된 방법으로, 인식률은 5위 이내가 94.3%의 인식률을 나타내었다.

• 대한치과교정학회지
• /
• 제29권2호
• /
• pp.147-156
• /
• 1999

동양권 특히 한국인에게서 자주 발견되는 제III급 부정교합은 하악과성장, 상악열성장 또는 혼합형으로 나눌 수 있다. 그 중 골격성 제III급 부정교합은 대부분이 상악골의 열성장을 동반하고 있으며, face mask는 상악골 열성장을 나타내는 성장기 아동에서 주로 쓰이는 악정형 장치이다. face mask는 전치부 반대교합과 상악골의 위치를 개선하여 대부분 적절한 교합관계를 이루어 양호한 안모를 얻을 수 있으나 어떤 경우는 상하순이 전방으로 돌출된 듯한 바람직하지 않은 안모를 얻는 경우도 있다. 따라서 치료 전 어떠한 환자의 조건이 치료 후 바람직한 교합관계와 안모를 얻을 수 있는지를 술자가 알 수 있다면 face mask 치료의 결과 예측과 한계에 대하여 보다 잘 판별할 수 있을 것이다. 본 연구는 성장기 제 III 급 부정교합 아동의 치료 후 양호한 안모를 얻는데 도움을 주고자 시행하였으며 상악골 전방견인 치료후 양호한 안모를 보이는 군(Group 1, n=12)과 양호하지 못한 안모를 보이는 군(Group 2, n=14)으로 나누고, 치료 전과 치료 후의 측방 두경부 방사선 계측 항목을 이용한 후향적인 연구로 통계처리를 시행한 결과 다음과 같은 결론을 얻었다. 1. 골격성 부조화로 인해 상악전치가 이미 순측경사되어 전돌되어있을 수록 치료 후 안모는 좋지 않았으며, 상악전치와 관련된 전방 치조골(prosthion)의 전돌 또한 안모에 영향을 주었다. 2. 치료 전 상악골과 하악골이 이루는 각도가 작을수록(NL-ML) 좋은 안모를 나타내었다. 3. 치료 전 하순의 돌출도가 클수록 치료 후 bialveolar protrusion되는 경향을 나타내었다. 4. 치료 후 하악골의 후하방회전정도가 클 수록 좋지 못한 안모를 보였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.31.1-31.7
• /
• 2019

Background: To test the hypothesis that in profile smiling view, for ideal aesthetics, a tangent to the labial face of the maxillary central incisor crowns should be approximately parallel to the true vertical line and thereby perpendicular to the true horizontal line. Methods: An idealized female image was created with computer software and manipulated using the same software to construct an "ideal" female profile image with proportions, and linear and angular soft tissue measurements, based on currently accepted criteria for idealized Caucasian profiles. The maxillary incisor labial face tangent was altered in 5° increments from 70 to 120°, creating a range of images, shown in random order to 70 observers (56 lay people and 14 clinicians), who ranked the images from the most to the least attractive. The main outcome was the preference ranks of image attractiveness given by the observers. Results: The most attractive inclination of a tangent to the labial face of the maxillary incisor crowns in profile view in relation to the true horizontal line was 85°, i.e. 5° retroclined from a perpendicular 90° inclination. The most attractive range appears to be between 80 and 90°. Excessive proclination appeared to be less desirable than retroclination. Beyond 105° most observers recommend treatment. Conclusion: In natural head position, the ideal inclination of the maxillary incisor crown labial face tangent in profile view will be approximately parallel to the true vertical line and thereby approximately perpendicular to the true horizontal line.

• 치과방사선
• /
• 제2권1호
• /
• pp.23-27
• /
• 1972

A roentgenographic cephalometric study was made on the soft and hard tissue profile of Korean adults. The subject consisted of 52 males and 54 females from 17 to 22 years of age and with normal occlusion and acceptable profile. Twenty one landmarks were plotted and two oriented lines named SnH line and SnV line were drawn on the tracings of all cephalograms. The means and the standard deviations from the subjects were calculated in each measuring category and the means were compared with those of male and femal samples. The results were obtained as follow: 1. In depth and height, individual variations and sex differences of the lower facial profile were larger than the upper face. 2. The sex differences of upper facial profile were larger in height than depth. 3. The individual variations and sex differences of the top of nose were the smallest in all measuring points. 4. The thickness of the soft tissue of upper face and upper lip in male sample were larger than those of female, but the same matter were not found in mental region.

• Tribology and Lubricants
• /
• 제26권4호
• /
• pp.230-239
• /
• 2010

Mechanical face seal installed in boiler feedwater pump prevents leakage of working fluid using thin fluid film between stator and rotor. If the leakage of working fluid exceeds the allowable volume, serious malfunction of boiler feedwater pump will be happen. The thinner fluid film exists between stator and rotor, the less working fluid leaks out. However, if the thickness of fluid film is not enough, the wear of seal face will be increased. And it causes the decrease in life of mechanical face seal. Therefore appropriate design is necessary to maximize the performance and life of mechanical face seal. In this study, numerical analysis using finite volume method was conducted to investigate the static characteristics of wavy mechanical face seals which have 4 different wavy surface profiles on rotor. As a result, opening force, leakage volume of working fluid and friction torque were obtained. For the same minimum film thickness, the static characteristics of mechanical face seal were affected by the wavy surface profile which can change the thickness of working fluid film and pressure distribution.

• 대한치과교정학회지
• /
• 제24권2호
• /
• pp.405-417
• /
• 1994

The purpose of this study was to investigate proportional characteristics of soft tissue profile in Korean young adults. The sample consisted of 50 young adults(25 males and 25 females) who had pleasing profile and normal occlusion. Soft tissue proportional analysis was performed on lateral cephalograms taken in natural head position. The results were as follows : 1. Mean and standard deviation of proportional analysis were obtained. 2. Horizontal and vertical dimensions were larger in male. But facial proportion had no sexual difference except upper/lower face height (p<0.05). Upper/lower face height was larger in female than in male. 3. Vertical dimensions, except SN-ST, had high correlation with horizontal dimensions. 4. Head positioning error of natural head position was smaller than inter -individual variability of SN line.

• 사상체질의학회지
• /
• 제29권2호
• /
• pp.95-103
• /
• 2017

Objectives This study was aimed to analyze characteristics of facial shapes in adult women by sasang constitution using hyungsang classification. Methods Using a digital camera, we took a picture of 1,011 women who participated in clinical study on menstrual pain and acquired their 3D facial images with a face-only scanner. They filled out SSCQ-P(sasang constitution questionnaire for patient) for the diagnosis of sasang constitution. Based on the above photographs and 3D images, one of the hyungsang medicine specialist diagnosed according to five diagnostic criteria. The sasang constitution was diagnosed by referring to questionnaires and photographs. Frequency analysis was performed using the statistical analysis system version 9.4 and chi-square test was performed for validity evaluation. Results In taeeumin, the wide face shape(n=261, 74.36%) was much more than the narrow shape(n=90, 25.64%) and the convex face profile(n=164, 85.86%) was much more than the concave profile(n=27, 14.14%). Regardless of sasang constitution, angular face shape(n=501, 50%) was the most, followed by oval shape(n=317, 31.64%). Subjects with big ears(n=291, 29.19%) were the most, while big eyes(n=104, 10.43%) were the least. Subjects with eyes and nose tip upward(n=615, 78.05%) were the most, while eyes and nose tip downward(n=22, 2.79%) were the least. Conclusions Most Korean adult women have angular face, such as square or diamond, with slanted eyes and upturned nose. Taeeumin women have wide facial shape and convex profile.

• Journal of Multimedia Information System
• /
• 제8권2호
• /
• pp.85-92
• /
• 2021

In a face, there is much information of person's identity. Because of this property, various tasks such as expression recognition, identity recognition and deepfake have been actively conducted. Most of them use the exact frontal view of the given face. However, various directions of the face can be observed rather than the exact frontal image in real situation. The profile (side view) lacks information when comparing with the frontal view image. Therefore, if we can generate the frontal face from other directions, we can obtain more information on the given face. In this paper, we propose a combined style model based the conditional generative adversarial network (cGAN) for generating the frontal face from multi-view images that consist of characteristics that not only includes the style around the face (hair and beard) but also detailed areas (eye, nose, and mouth).