• 제목/요약/키워드: profile change

검색결과 961건 처리시간 0.029초

서보건을 이용한 저항 점 용접 공정의 최적 용접 조건 설정에 관한 연구 (Optimization of Resistance Spot Welding Process Using Servo-gun System)

  • 백정엽;김태형;이종구;이세헌
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 추계학술대회 논문집
    • /
    • pp.679-682
    • /
    • 2002
  • Resistance spot welding using air gun has been used for joining the sheet metal in automotive manufacturing process. Although air gun has many advantages, it also has the limitation to control the pressure as a factor to improve weld quality. In this study, we apply servo gun using servo motor to resistance spot welding and find the relationship between welding pressure and welding quality. Trough the experiment to change welding pressure during the welding cycle, we can make it clear that the change of welding pressure is greatly influence on the welding quality. To get in a. using response surface methodology, drew out the optimal welding pressure profile for welding quality progresses. We made an optimal profile of welding pressure which improves welding quality using response surface methodology.

  • PDF

A finite element based approach to observe hydrodynamic pressure in reservoir adjacent to concrete gravity dam

  • Santosh Kumar, Das;Kalyan Kumar, Mandal;Arup Guha, Niyogi
    • Ocean Systems Engineering
    • /
    • 제12권4호
    • /
    • pp.385-402
    • /
    • 2022
  • This paper deals with the study of hydrodynamic pressure in reservoir adjacent to the concrete gravity dam subjected to dynamic excitation. Widely famous finite element method is used to discretize the reservoir domain for modelling purpose. Pressure is considered as nodal variable following Eulerian approach. A suitable nonreflecting boundary condition is applied at truncated face of reservoir to make the infinite reservoir to finite one for saving the computational cost. Thorough studies have been done on generation of hydrodynamic pressure in reservoir with variation of different geometrical properties. Velocity profile and hydrodynamic pressure are observed due to harmonic excitation for variation of inclination angle of dam reservoir interface. Effect of bottom slope angle and inclined length of reservoir bottom on hydrodynamic pressure coefficient of reservoir are also observed. There is significant increase in hydrodynamic pressure and distinct changes in velocity profile of reservoir are noticeable for change in inclination angle of dam reservoir interface. Change of bottom slope and inclined length of reservoir bottom are also governing factor for variation of hydrodynamic pressure in reservoir subjected to dynamic excitation.

Effect of Feeding Ficus infectoria Leaves on Rumen Microbial Profile and Nutrient Utilization in Goats

  • Singh, B.;Chaudhary, L.C.;Agarwal, N.;Kamra, D.N.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제24권6호
    • /
    • pp.810-817
    • /
    • 2011
  • A feeding trial was conducted to study the effect of tannin rich Pakar (Ficus infectoria) leaves on microbial profile, rumen fermentation and nutrient utilization in goats. Eight goats divided in two groups were fed pakar leaves (experimental group) and green oats (control group) as sole roughage source along with a fixed quantity of concentrate mixture for a period of 3 months. Two metabolic trials of six days duration were conducted after 30 and 90 days of experimental feeding. The dry matter intake was significantly higher (p<0.05) and digestibility's of DM, OM, CP, EE, NDF and ADF were reduced in experimental as compared with the control group. The TDN intake was similar (236.52 vs. 240.39 g/d) in both the groups. All the animals were in positive nitrogen balance. The concentration of ammonia nitrogen, TVFA, lactic acid and activities of xylanase and protease were reduced in pakar leaves fed goats. The rumen microbial profile as obtained by MPN technique showed no change in total bacterial population but total fungi and cellulolytic bacteria were reduced (p<0.05), whereas, tannin degrading/tolerant bacteria increased with the feeding of pakar leaves. Real time PCR data revealed a decrease in Ruminococcus flavefaciens, an increase in methanogens and no change in the Fibrobacter succinogenes population by feeding of pakar leaves.

경험고유함수를 이용한 후정해수욕장 단기 모래 이동 분석 (Short-term Sand Movement Analysis in Hujeong Beach using Empirical Orthogonal Functions)

  • 천세현;서경덕;안경모
    • 한국해안·해양공학회논문집
    • /
    • 제26권4호
    • /
    • pp.244-252
    • /
    • 2014
  • 후정해수욕장의 모래 이동을 분석하기 위해 경험고유함수(Empirical Orthogonal Function; EOF) 분석법을 적용하였다. EOF 분석을 위해 2009년 6월부터 2010년 5월까지 13개 기선에 대해서 총 5회 실시된 후정해수욕장의 단면 관측값이 사용되었다. 13개 단면 분석결과 사이의 시간적, 물리적 일관성을 확보하기 위해 13개 기선 모두를 하나로 통합하고 이를 사용해 EOF 분석을 수행하였다. 분석결과 첫 번째 고유함수는 평균해빈 지형을 나타내었으며 두 번째와 세 번째 고유함수의 경우 해빈의 자연변동성과 파랑에 의해 발생된 횡방향 모래이동을 각각 나타내었다. 네 번째와 다섯 번째 고유함수의 경우 특별한 연관성을 발견할 수 없었다. 결론적으로 후정해수욕장의 모래 이동에 영향을 미치는 요인은 크기 순으로 자연변동성과 파랑에 의한 횡방향 모래이동으로 분석 되었다.

스노우보드 손상 (Snowboard Injury)

  • 서중배;이성철;박진영
    • 대한정형외과스포츠의학회지
    • /
    • 제3권1호
    • /
    • pp.22-24
    • /
    • 2004
  • Snowboarding has become one of the premier alpine sports. The past decade has seen the popularity of snowboarding increase dramatically and the recent Winter Olympic Game showcased the strong visual appeal of the sport and the youth-oriented lifestyle and culture that accompanies it. The injury profile of the sport has also undergone change along with technological advances in boot and binding systems and the changing demographics of the sports participants. Central to the development of injury-prevention strategies is knowledge of the profile of injuries that occur, understanding those who are at particular risk and, if possible, the biomechanical factors involved in each injury type. Snowboarding was initially considered a dangerous, uncontrolled, alpine sport - an opinion based on little or no scientific evidence. That evidence has rapidly grown over the past decade and we now know that snowboard injury rates are no different to those in skiing; however, the injury profile is different. The purpose of this review is to give some perspective to the current snowboard injury literature. It discusses not only the demographic profile of those injured and the type of injuries that occur, but also gives some insight into the progress that has occurred in determining the impact of specific prevention strategies, such as splints to prevent injuries to the wrist/forearm. As the literature indicates, however, some things will not change, e.g. injuries are more likely to occur in beginners and lessons need to be reinforced as a fundamental aspect of any injury-prevention strategy.

  • PDF

Angle씨 제 3 급 부정교합 환자 치료 전후의 안모 연조직 변화에 관한 두부방사선 계측학적 연구 (A ROENTGENOCEPHALOMETRIC STUDY ON SOFT TISSUE PROFILE CHANGES IN PRE-POST TREATMENT OF ANGLE'S CLASS III MALOCCULUSION)

  • 김재우;손병화
    • 대한치과교정학회지
    • /
    • 제13권2호
    • /
    • pp.177-183
    • /
    • 1983
  • The soft tissue covering of the face plays an important role in facial esthetics, speech and other physiologic functions. Thus, it is recognised by all clinical orthodontists that success of orthodontic treatment is closely related to the changes in soft tissues of the face. The purpose of this study was to evaluate the changes of bony and soft tissues in prepost treatment of Angle's Class III malocclusion. The sample consisted of 18 males and 37 females, pretreatment age of 9 years to 11 years. For this study 11 landmarks were plotted, 14 linear length, 4 soft tissue thickness and 2 angles were measured. The obtained results were as follows; 1. In the linear measurements of bony and soft tissue changes, A, Is, Ss, Ls and Li were located more anteriorly in both sexes. However Si and B showed more remarkable anterior movement in female. 2. In the comparison of the changes of the soft tissue thickness, Ss and Li in male subjects and Ss in female subjects increased. 3. In the degree of correlation between changes in the soft tissue profile and changes in the skeletal profile, Is: Ls, Il: Li and B: Si in both sexes had significant correlations. However A:Ss had remarkable significant correlation in female. 4. There were significant correlations between change in ${\angle}A$ and change in ${\angle}B$ in all sexes. 5. There were little correlation between changes in distance difference of Is and Ii and Change in distance difference of Ls and Li in all sexes.

  • PDF

하악전돌증 환자의 악교정 수술후 시간경과에 따른 안모 연조직 변화에 관한 연구 (A STUDY ON CHANGE OF THE SOFT TISSUE FACIAL PROFILE AFTER ORTHOGNATHIC SURGERY IN PATIENTS WITH THE MANDIBULAR PROGNATHISM)

  • 신민철;이상철
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제19권4호
    • /
    • pp.351-361
    • /
    • 1997
  • This study was performed to evaluate the change of the soft tissue facial profile after mandibular set back surgery during time intervals. For this study, 33 patient, 8 males and 25 females, were selected and their lateral cephalograms were taken and analyzed periodically. Hard and soft tissue changes during postoperative time intervals, correlation between surgical skeletal changes and postoperative soft tissue changes, and prediction for long-term soft tissue changes were established through varying statistical methods. The results were as follow : 1. There were meaningful changes of anteroposterior skeletal position at 6 months and 2 years after mandibular set back by mandibular ramus osteotomy. Two years postoperatively, there was 30%, 32%, 29% relapse on B point, pogonion, menton each. 2. Two years after the mandibular ramus osteotomy, the relative changes of the soft tissue to their osseous counterparts showed 76% on the lower lip and 91% on the pogonion. 3. The movements of the mandibular landmarks in correlation to anteroposterior position of the lower lip and soft tissue of the chin showed to be effective on a long-term basis. 4. Using surgical changes of pogonion, prediction of changes in soft and hard tissue pogonion was useful and the coefficient of determination was 0.46 each and their reliability decreased 2 years postoperatively. 5. The upper lip position after the mandibular set back surgery was somewhat anterior 2 years postoperatively, but that has no statistical meanings.

  • PDF

에너지 축열보드 열해석을 위한 컴퓨터 수치해석 (Computer Simulation for the Thermal Analysis of the Energy Storage Board)

  • 강용혁;엄태인;곽희열
    • 에너지공학
    • /
    • 제8권2호
    • /
    • pp.224-232
    • /
    • 1999
  • 캡슐형 잠열재를 이용한 열저장 시스템은 바닥 난방 및 건물 난방에서 매우 효과적인 시스템이다. 이러한 시스템 개발에 필수적인 요소가 열유동 매체가 순환하는 파이프 주변의 캡슐내 온도 분포와 열유동 매체의 유량 등이다. 그러므로 본 연구에서는 3차원 비정상 상태에서 Navier-Stokes 방정식, 난류모델을 비롯한 스칼라 보존 방정식을 적용하여 캡슐 블록의 온도 분포 및 파이프 내의 유동장 해석을 수행하였다. 또한 본 연구와 같이 계산 영역이 특별한 기하학적 현상을 형상(circle+square)인 문제 해결하는데 적용할 수 있는 새로운 격자 생성 기술(MBFGE/CCM)을 개발하였다. 격자계는 파이프에서 원형 격자를 이용하였고, 캡슐 블록에서 사각 격자를 이용하여 다중격자와 미세격자를 결합하여 사용하였다. 본 연구의 목적은 컴퓨터를 이용한 수치해석적 방법을 미세 캡슐을 이용한 축열보드에 적용하여 2종류의 열경계 상태에 대하여 속도와 온도분포를 계산하여 비교분석을 하는 것이다. 온도는 축열 보드의 한 쪽면은 대류면이고 다른 한쪽면은 단열면인 경우(Case 2)보다 양면 모두 단열인 경우(Case 1)일 때 더 높게 상승하였다. 온수 파이프 중심선인 Y=0 에 가까운 영역에서 Case 1과 Case 2사이에 축열 보드 내에서 온도 차이는 확연하게 나타났다. 향후 수치해석의 정확도를 높이고 축열 보드의 열전달 현상을 보다 정확히 계산하기 위해서는 위치 및 시간에 따른 정밀한 온도 측정값이 필요하고 특히 잠열재인 미세 캡슐이 상변화를 하므로 온도 변화에 따른 물질의 비열(C$_{p}$)과 열전달율(λ)을 고려한 방정식이 요구된다.

  • PDF

The Increment of Purine Specific Sodium Nucleoside Cotransporter mRNA in Experimental Fibrotic Liver Induced by Bile Duct Ligation and Scission

  • Lee, Sung-Hee;Chae, Keon-Sang;Nan, Ji-Xing;Sohn, Dong-Hwan
    • Archives of Pharmacal Research
    • /
    • 제23권6호
    • /
    • pp.613-619
    • /
    • 2000
  • We investigated the expression profiles of rat fibrotic liver induced by bile duct ligation and scission (BDL/S) using the 3'-directed cDNA libraries. The possibility that the 3'-directed cDNA library represents the mRNA population faithfully was examined by northern blots. During the northern analysis based on fibrotic liver expression profile, we found for the first time that purine specific sodium nucleoside cotransporter (SPNT) was upregulated in BDL/S-induced fibrotic liver. To determine whether the accumulation of bile juice could affect the expression of SPNT mRNA or not, we examined the change of SPNT mRNA expression at 3, 14, 28 days after BDL/S operation. No change in SPNT expression was observed in rat liver at 3 days after surgery. In contrast, there were significant increases in SPNT expression at 14 and 28 days after surgery. We also examined whether chronic liver damage affected SPNT mRNA expression. SPNT mRNA level was significantly increased in BDL/S-induced fibrotic rat liver, whereas no significant change was obserbed in fibrotic livers chronically exposed to carbon tetrachloride or dimethylnitrosamine. From the above results, although further study might be needed, it was considered that the increment of SPNT mRNA in BDL/S liver morphological compatibility to human was remarkable.

  • PDF

IPMSM Design for Sensorless Control Considering Magnetic Neutral Point Shift According to Magnetic Saturation

  • Choi, JaeWan;Seol, Hyun-Soo;Lee, Ju
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권2호
    • /
    • pp.752-760
    • /
    • 2018
  • In this paper, interior permanent magnet synchronous motor (IPMSM) design for sensorless drive, considering magnetic neutral point shift according to magnetic saturation, has been proposed. Sensorless control was divided into a method based on inductance and a method based on back induced voltage. Because induced voltage is very small at zero or low speed, error in rotor initial position estimation may occur. Using the ratio of saliency addresses this problem. When using high-frequency injections at low speed, the rotor's initial position is estimated at the smallest portion of the inductance. IPMSM has the minimum inductance at the d-axis. However, if magnetic saturation leads to magnetic neutral point variation, following the load current change, there is a change in the minimum point of inductance. In this case, it can lead to failure of initial rotor position estimation. As a result, it is essential that the blocking design has an inductance minimum point shift. As such, in this study, an IPMSM design method, by blocking magnetic neutral point change, has been proposed. After determining the inductance profile based on the finite element analysis (FEA), the results of proposed method were verified.