• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.98-103
• /
• 2006

The hunting is the natural characteristics of the railway wheelset which is originated from the contact between the conical type wheel profile and rail. The critical speed of rolling-stock is called when the hunting is occurred, and it is closely connected with vehicle stability. The parameters which influence the hunting motion are like wheel profile, primary spring property and wheelset dimension, etc. The studies for these parameters are reported diversely. In this study, we aim to analyze the influence of parameters on hunting with the change of wheel profile produced by wheel wear and material property produce by aging of primary spring. For this, we made a dynamic model for wheelset and vehicle. Using these models, we analyzed the critical speed with the variations of the parameters like as wheel profile and primary spring property and we show the results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.247-248
• /
• 2023

The unit curtain wall is an exterior finish currently used on the exterior walls of high-rise buildings. Although the structural impact is not significant due to the non-strength wall, in the case of the unit curtain wall to which the factory manufacturing method is applied, deformation of the profile may occur according to its own weight. Therefore, in this study, stability is evaluated through design standard calculation applied when finishing the outer wall according to the design shape of the unit curtain wall profile.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.4
• /
• pp.242-248
• /
• 2001

A high resolution Chirp seismic profile and a multichannel seismic reflection profile were analysed to study the possibility of gas hydrate presence in the southwestern upper slope of the Ulleung Basin. The Chirp profile shows acoustic turbidity, acoustic void, and pockmarks, suggesting the presence of shallow gas in the sediments .Slope failures appear to have occurred in association with decomposition of gas hydrated sediments. A bottom-simulating reflector (BSR) is seen in subbottom depths of 60 to 110 m below the seafloor at water depths of 750 to 1130 m. The sediments above BSR are characterized by acoustic blanking probably due to amplitude reduction caused by a mixture of gas hydrate with sediments. The interval velocity above the BSR is 1,650 m/sec and it drops abruptly to 1,080 m/sec below the BSR. The sediment column between seafloor and the BSR thins with increasing water depth, which is very closely related to increasing geothermal gradient with increasing water depth in the Ulleung Basin.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.526-534
• /
• 2018

The purpose of this study is to classify the degree of change of job discrimination of the disabled according to time and to identify factors affecting life satisfaction according to each type. For this study, data from the 3rd to 8th year of the employment panel for the disabled were used and 1,227 data were used. The longitudinal profile of the disabled person's discrimination was classified through latent profile growth analysis(LPGA), and then influential factors were verified through binomial logistic regression analysis. First, the types of change of the job discrimination of the disabled were represented as the decrease group and the increase group. The factors influencing the job discrimination were the degree of disability, chronic diseases, gross income, and life satisfaction. Second, the factors of predicting the life satisfaction according to the types of job discrimination of the disabled are as follows: job discrimination, decrease and increase group have higher life satisfaction as the self - esteem and socioeconomic status are higher. Based on these results, this study suggested the implications of this study to cope with the discrimination of the workplace with the disabled.

• Ocean and Polar Research
• /
• v.29 no.2
• /
• pp.113-121
• /
• 2007

The sound wave in the sea propagates under the effect of water depth, sound speed structure, sea surface roughness, bottom roughness, and acoustic properties of bottom sediment. In shallow water, the bottom sediments are distributed very variously with place and the sound speed structure varying with time and space. In order to investigate the seasonal propagation characteristics of low-frequency sound wave in the Yellow Sea, propagation experiments were conducted along a track in the middle part of the Yellow Sea in spring, summer, and autumn. In this paper we consider seasonal variations of the sound speed profile and propagation loss based on the measurement results. Also we quantitatively investigate variation of bottom loss by dividing the propagation loss into three components: spreading loss, absorption loss, and bottom loss. As a result, the propagation losses measured in summer were larger than the losses in spring and autumn, and the propagation losses measured in autumn were smaller than the losses in spring. The spreading loss and the absorption loss did not show seasonal variations, but the bottom loss showed seasonal variations. So it was thought that the seasonal variation of the propagation loss was due to the seasonal change of the bottom loss and the seasonal variation of the bottom loss was due to the change of the sound speed profile by season.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.1 no.4
• /
• pp.196-202
• /
• 1977

The solidification process in a cylinder with finite thickness in studied by explicit finite difference method. The temperature distribution, the solidification front profile and the dischrged latent heat for the process are obtained. It is found that the solidification front profile is almost linear except in the vicinity of the initation of phase change. This result motivates us to use linear relations between the position of solidification and time for approximate calculations.

• The korean journal of orthodontics
• /
• v.24 no.1 s.44
• /
• pp.135-147
• /
• 1994

Facial esthetics is one of the most important goal of the orthodontic treatment and main concern of many patients. Facial esthetics should be considered in orthodontic diagnosis and treatment planning. Prediction of soft tissue profile changes after orthodontic tooth movement should be considered as well. The purpose of this study was to find out the effect of orthodontic treatment on lip profile in adult patient. The pre and post treatment cephalometric roentgenograms of 87 female adult with bimaxillary protrusion were used to analyze lip profile change. All subjects were treated with four bicuspids extraction. Obtained results were as follows . 1. Lip thickness changes after incisor retraction showed different patterns according to areas of the lip. The thickness of the red lip area showed 2.78 mm increase in average. In contrast the thickness of the cutaneous area showed 0.65 - 0.7 mm decrease according to the different cutaneous areas. 2. The length of the red lip area decreased(1.3mm) after incisor retraction. 3. The length of the cutaneous lip area increased(2.9mm) after incisor retraction.

• The korean journal of orthodontics
• /
• v.4 no.1
• /
• pp.21-29
• /
• 1974

The purpose of the present study is to evaluate changes of the soft tissue relative to underlying skeletal elements during orthodontic treatment, and the influence of orthodontic treatment quantitatively on various regions of the facial profile. 59 Korean young women were selected, whose Hellman dental age was IV A, IV C and V A. Lateral cephalometric head films were taken before and after orthodontic treatment. From tracings, landmarks on skeletal and soft tissue profile were located, and then their linear and angular measurements were made directly. The results were obtained as follow: 1) Soft tissues of the facial profile were closely related and dependent on the underlying dentoskeletal frameworks. Orthodontic treament resulted in the reduction of dentofacial protrusion with both upper and lower lips becoming less procumbent during treament. 2) Thickness of the upper lip increased considerably during orthodontic treatment, and this change was related to maxillary incisor retraction. The ratio between the amount of maxillary incisor retraction and that of increment of upper lip thickness was approximately 5:3. 3) Soft tissue thickness overlying Downs' point A, point B and pogonion was not modified by orthodontic treatment. 4) Holdaway's H line, relating facial profile to the underlying dentoskeletal framework, seemed to be the most practical approach to soft tissue analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.125-125
• /
• 2000

An Empirical approach to determine a road-surface condition is presented The road-surface condition thus provided includes the detection of not only friction coefficient, but also abrupt surface-profile changes such as pitfalls and bumpers The former plays a key role in establishing the appropriate control strategy, while the latter allows to minimize unnecessary brake intervention induced by the aforementioned jut. In this paper, we use an empirically chosen variable, namely. the time-rate of change of vehicle speed estimated from the point where ABS engaged to the point where measurement taken Experimental results shoe that the proposed method is effective to infer various control variables critical for the control of ABS.

• Journal of Power System Engineering
• /
• v.7 no.3
• /
• pp.23-28
• /
• 2003

In heavy nuclear power plant, high energy through main steam line is provided to turbine that generate the electric power. Since plant had generated power, high noise has been occurred. Noise make equipments and work environment worse. For finding out the location and the cause of making noise, noise was measured along main steam line at open/close test of Main Steam Isolation Valve (MSIV hereafter). As the result, it was identified that the vortex shedding in the cavity of MSIV is main noise source. The profile change of MSIV seat ring was proposed as the method of noise reduction. After filletting MSIV seat ring, the noise level reduced $10{\sim}20dB$ compared before the change of profile.