• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.9-18
• /
• 2008

줄눈 콘크리트포장(JCP-Jointed Concrete Pavement)의 경우 포장단면 온 습도차에 의해 슬래브 내의 컬링이 발생하게 된다. 컬링에 의해서 발생하는 슬래브의 휨 형상 및 크기는 포장내 응력 및 평탄성에 영향을 미치기 때문에 포장의 구조적, 기능적 성능에 중요한 영향을 줄 수 있다. 슬래브의 휨 형상을 직접 측정하는 것은 시공초기에 포장내에 다량의 계측기를 매설하여야 하며, 시공초기부터 거동의 정교한 측정이 필요하고 고가의 실험비용 및 기술적 인 어려움을 갖고 있다. 본 연구에서는 현장에서 손쉽게 획득할 수 있는 프로파일 데이터(Profile Data)에 파워 스펙트럼 분석(Power Spectrum Density Analysis) 및 역 푸리에 변환(Inverse Fast Fourier Transform) 기법 등을 적용하여 임의의 시간에서 줄눈 콘크리트포장의 슬래브 휨 형상을 측정하는 방법을 개발하였다. 개발한 기법의 실효성을 검증하기 위하여 국내 중부내륙에 위치한 시험도로 줄눈 콘크리트 포장에서 시간대별 프로파일을 측정하고 이 데이터로부터 슬래브 휨 형상을 도출하여 그 결과를 검토하였다. 또한 동 시간대의 연속철근 콘크리트포장(CRCP- Continuous Reinforced concrete Pavement) 구간에서의 프로파일 데이터를 분석하고 이를 줄눈 콘크리트포장에서의 결과와 비교하여 개발한 슬래브 휨 형상 추출기법의 타당성을 검증하였다.

• 대한영양사협회학술지
• /
• 제11권1호
• /
• pp.125-132
• /
• 2005

Hypercholesterolemia has been regarded as a major risk factor of coronary heart disease(CHD). CHD is increasing in recent years among Koreans due to westernization of lifestyle and dietary behaviors. In the United States, implementation of the National Cholesterol Education Program(NCEP) had resulted 40% decline in mortality from CHD. This study was designed to evaluate the effect of medical nutrition therapy on serum lipid levels and discuss the effective nutrition education contents. Thirty outpatients(Male 40%, female 60%) with hypercholesterolemia were educated by medical nutrition therapy(MNT) protocol. At first visit and after three months of MNT, we assessed serum lipid profile, body weight and surveyed general characteristics, lifestyle and food habits through questionnaire. After 12 weeks of MNT, there were significant reductions in serum cholesterol and low-density lipoprotein cholesterol(LDL-C). Foods habits and lifestyle were changed to the desirable patterns. These results indicate that lipid profile is improved by changes of dietary behaviors and lifestyle. Especially in case of obesity, cholesterol lowering effect of MNT was more powerful. Consequently, MNT is effective on reduction of serum lipids by behavior change in hypercholesterolemic patients.

• 정보처리학회논문지D
• /
• 제11D권1호
• /
• pp.95-104
• /
• 2004

본 논문에서는 사용자 프로파일을 기반으로 한 정보 필터링을 사용하여 학생 개인의 특성에 맞는 효율적인 원격 비디오 학습 평가 시스템을 제안한다. 비디오를 이용한 문제 출제를 위하여 위치, 크기, 그리고 컬러 정보를 기반으로 키 프레임을 추출하고 그레이 레벨 히스토그램 차이와 시간 윈도우를 이용하여 문제 출제 추간을 추출한다. 또한 효율적인 평가를 위하여 카테고리 기반 시스템과 키워드 기반 시스템을 합성하여 문제를 출제하도록 한다. 따라서 학생들은 부족한 영역을 보충하고 관심 있는 영역을 유지하면서 학업 성취도를 향상시킬 수 있다.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.22-29
• /
• 2011

In this study, the glass fiber drawing from a silica preform in the furnace for the optical fiber manufacturing process is numerically simulated by considering the radiative heating of cylindrically shaped preform. The one-dimensional governing equations of the mass, momentum, and energy conservation for the heated and softened preform are solved as a set of the boundary value problems along with the radiative transfer approximation between the muffle tube and the deformed preform shape, while the furnace heating is modeled by prescribing the temperature distribution of muffle tube. The temperature-dependent viscosity of silica plays an important role in formation of preform neck-down profile when the glass fiber is drawn at high speed. The calculated neck-down profile of preform and the draw tension are found to be reasonable and comparable to the actual results observed in the optical fiber industry. This paper also presents the effects of key operating parameters such as the muffle tube temperature distribution and the fiber drawing speed on the preform neck-down profile and the draw tension. Draw tension varies drastically even with the small change of furnace heating conditions such as maximum heating temperature and heating width, and the fine adjustment of furnace heating is required in order to maintain the appropriate draw tension of 100~200 g.

• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1378-1386
• /
• 2002

In the present study, velocity profile and wall shear stress distributions of developing turbulent oscillatory flows in an oscillator connected to straight duct located in exit region of a curved duct was investigated experimentally. The experimental study for air flows was conducted to measure axial velocity profiles, shear stress distributions by using the Laser Doppler Velocimetry(LDV) system with the data acquisition and processing system of Rotating Machinery Resolver(R.M.R) and PHASE software. The results obtained from experimental studies are summarized as follows. The critical Reynolds number for a change from transitional oscillatory flow to turbulent flow was about 7500, in the 60region of dimensionless axial position which was considered as a fully developed flow region. The turbulent oscillatory flow, velocity profiles of the inflow period in the entrance region were gradually developed, but those of the outflow period were not changed nearly. Velocity profiles of inflow and outflow were shown as a symmetric form in a fully developed flow region. The wall shear stress distributions of turbulent oscillatory flow increase rapidly as the flow proceeds to downstream and flow was in good agreement with the theoretically.

• 펄프종이기술
• /
• 제30권1호
• /
• pp.7-17
• /
• 1998

With the advent of CLSM in the end of 1980s, it has been applied to the field of pulp and paper science in various ways. This study showed the potentials of CLSM In analyzing a change of pulp fiber and paper properties before and after mechanical treatment. In particular, a quantification of internal fibrillation has been done using cross-sectional images of fibers and image analysis technique, then evaluated the effects of fiber wall delamination on fiber and paper properties. It showed that the delaminated fibers were closely associated to development of the interfiber bonding in a fiber network. The CLSM made it possible to investigate a density profile along the sheet thickness, which was created by some papermaking processes like pressing, drying and calendering. Through the attempt to observe the forming procedure of a fiber network during handsheet making, the CLSM images showed that the pressing stage was considered greatly to contribute to generation of interfiber bonding with removing a free water and partly a bound water between fibers. In addition, the CLSM could be used to illustrate not only a surface profile of paper showing the extent of smoothness or roughness, but also a density profile in a B-direction of the network. Finally it became evident that the CLSM could be used as an excellent tool to predict development in fiber and paper properties before and after mechanical treatment during papermaking processes.

• 대한치과교정학회지
• /
• 제14권1호
• /
• pp.103-113
• /
• 1984

This work was undertaken to evaluate the integumental response in lower face to hard tissue changes, and to grope the prediction equation for expected integumental profile changes. Cephalometric headplates of 25 persons consisted of 8 Angle's class 1 maxillary protrusive and 17 Angle's class II division 1 patients whose mean age was 15.2 years were traced, diagramatized, and statistically analyzed. The results were as follows; 1. Upper incisor and lips were retracted and convexity of integumental profile decreased concurrently with decrease of hard tissue procumbency, however soft tissue point A', B', and Pog' did not undergo significant changes after orthodontic treatment. 2. Remarkable increment of upper lip thickness and upper lip height was shown and this was related to upper incisor retraction. The ratio between the amount of upper incisor retraction and the increment o f upper lip thickness was approximately 1.16:1. 3. Moderate correlation of upper lip retraction to upper incisor retraction, and of lower lip retraction to lower incisor movement were arranged, and yet comparatively wide variability from subject to subject was shown. 4. It was possible to predict statistically for horizontal alteration of lip position and change of upper lip angulation ground in orthodontic treatment.

• 대한치과교정학회지
• /
• 제8권1호
• /
• pp.49-58
• /
• 1978

This investigation was undertaken to know how the bony facial profile could be changed with age. The 5 serial lateral cephalometric roentgenograms of the fourteen boys and fourteen girls between 7 and 11 years of age were studied and the findings seems to warrant the following conclusions. 1. The manaible tended to become more prognathic in relation to the cranial base (S-N) during growth, but the maxilla showed very little change. 2. There was increase in the inclination of the lower border of mandible associated with the increase in mandibular prognathism. 3. There was a tendency to being straight in bony facial profile due to the decrease in angle ANB with age. 4. The chin portion had a tendency to forward and downward growth in relation to the cranial base but there was slight strong tendency in downward growth. 5. The vertical growth was more prominant in the maxilla than in the mandible. 6. There was uniform and gradual increase of all measurements during growth. 7. Dimension of the craniofacial complex was larger in the boys than in the girls but this difference was not statistically significant. 8. Individual variation in skeletal growth was a normal occurrence.

• Restorative Dentistry and Endodontics
• /
• 제37권4호
• /
• pp.220-227
• /
• 2012

Objectives: The study was to compare the shaping ability of Reciproc (VDW) and WaveOne (Dentsply Maillefer) instruments compared with ProTaper, Profile and hand instrument during the preparation of simulated root canals. Materials and Methods: Five groups (n = 5) were established. Reciproc, WaveOne, ProTaper, Profile and K file (K-flexo file) were used to prepare the resin simulated canals. A series of preoperative and postoperative images were taken by a microscope and superimposed in 2 different layers. The amount of resin removed from both the inner and the outer sides of the canal was measured to the level of 10 mm from the apical tip, with a 1 mm increment. Results: The mean of resin removal from the inner canal wall was not different from the outer canal wall for Reciproc and WaveOne groups at apical third (1 - 3 mm level). There was no difference in the change of working length and maintenance of canal curvature. NiTi instruments are superior to stainless-steel K file in their shaping ability. Conclusions: Within the limitation of this present study, Reciproc and WaveOne instruments maintained the original canal curvature in curved canals better than ProTaper and Profile, which tend to transport towards the outer canal wall of the curve in the apical part of the canal.

• 정보관리학회지
• /
• 제21권3호
• /
• pp.61-82
• /
• 2004

이 연구의 목적은 현재 보편화된 공공도서관 이용자의 프로파일이 만들어진 배경을 이해하기 위한 것으로, 구십년 대 이전에 미국에서 수행된 스무 편의 대규모 공공도서관 이용과 정보추구 연구의 문헌리뷰를 통해 급격한 정보환경의 변화 이전 이용자의 특성을 인구통계학적, 생활양식, 사회화 및 상황 변인의 측면에서 검토하였다. 사회경제적 중산계층에 속하는 적극적 참여자 및 커뮤니케이션 엘리트로서 공공도서관 이용자의 특성은 1940년대 Berelson의 연구 이후 거의 변하지 않았으나, 구십년 대 이후의 다양한 상황변동에 따른 이들의 요구와 행태에 대한 지속적 연구가 기대된다.