• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.612-621
• /
• 2002

The purpose of this study was to compare the histomorphological change of curved root canal preparation using GT rotary File, Profile .04 taper and stainless steel K-file. 45 mesial canals(over 20 degree) of extracted human mandibular first molars were mounted in resin using a modified Bramante muffle system and divided into three groups. The roots were cross-sectioned at 2.5mm 5mm and 8mm levels from apical foramen. Tracings of the canals were made from preinstrumentation pictures of the cross section. The canals were prepared using a step-back technique with stainless steel K file(group 1), Profile .04 taper rotary file(group 2) and GT rotary file(group 3). Tracings of the prepared canals were made from postinstrumentation picture. Canal centring ratio. amount of transportation, area of dentin removed and shape of canal were measured and statistically were evaluated with Student-Newman-Keuls test using Sigma Stat(Jandel Scientific Software, USA). The results were as followings : 1 Amount of transportation of group 2 was the lowest at apical part, but there was no statistical difference. The direction of transportation was the outside of curvature at apical part. 2. Centering ratio at the apical part of group 1 was the highest, and there was statistical differences between apical and middle part, apical and coronal part(p＜0.05). Centering ratio at the middle part of group 3 was the lowest, and there was statistical difference between apical and middle part(p＜0.05). Centering ratio of group 2 was the lowest at apical part, but there was no statistical difference. 3. Amount of dentin removed of group 1 was the highest at coronal, middle and apical part among three groups, and there was statistical difference(p＜0.05). 4. The majority of the cross-sectioned canal shape after instrumentation were irregular at coronal, middle and apical part. But there are more number of round shaped canals at group 3 than other group.

• Journal of Korea Water Resources Association
• /
• v.39 no.9 s.170
• /
• pp.727-735
• /
• 2006

It is well known that sediment particles introduced in open-channel turbulent flows change mean velocity profile, since Vanoni suggested the reduction of the Karman constant in 1946. However, how the sediment particles take such a role and what parameters would be changed have been debated up to now. Some researchers, on the other hand, have insisted that the constant would not be changed regardless of introducing sediment particles. The present study is a careful re-evaluation of the previous studies on this issue. The study revealed some questionable approaches or methods in the decision of the previous researches and found the reason why this issue has been debated for a long time. The result indicated that the Karman number is reduced by adding sediment particles, but the amount of reduction is much smaller than the previous researches insisted. Finally, the present study proposes a mechanism of the Karman number reduction due to sediment particles.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.11
• /
• pp.1083-1092
• /
• 2007

The objective of the present paper is to evaluate the effect of the evolution of contact surface profile caused by fretting wear on fatigue life of press-fitted shaft by means of an analytical method based on experimental data. A finite element analysis was performed to analyze the stress states of press-fitted shaft, considering the worn contact profiles of shaft. The fatigue lives of the press-fitted shaft reflecting the evolution of contact stress induced by fretting wear were evaluated by stress-life approach using fatigue notch factor. It is found that the stress concentration of contact edge in press-fitted shaft decreases rapidly at the initial stage of total fatigue life, and its location shifts from the contact edge to the inside with increasing number of fatigue cycles. Thus the change of crack nucleation position in press-fitted shaft is mainly caused by the stress change of contact edge due to the evolution of contact surface profile by fretting wear. Furthermore, the estimated fatigue lives by stress-life approach at the end of running-in period of the fretting wear process corresponded well to the experimental results. It is thus suggested that the effect of fretting wear on fatigue life in press fits is strongly related to the evolution of surface profile at the initial stage of total fatigue life.

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.63-67
• /
• 1995

Broiler processing waste(offal) was homogenized and treated with the combination of acids. The offal was autolyzed(ensiled) at $25^{\circ}C$ for 72 hrs and analyzed for pH and fatty acid profile. The proximate composition and microbial content change of the autolyzed offal by mixing with wheat bran and ovendrying were evaluated. The initial pH value of the homogenized offal, 6.52 came down to 2.75 within 5 min after acidification and increased silightly to $3.06{\sim}2.92$ during autolysis. The proximate composition and fatty acid profile of the autolyzed offal were not substantially different from the unautoylzed offal. However, the log CFU(colony forming units)/g of total plate counts and fungal counts decreased from 7.45 and 7.11 to 3.39 and 2.03 after autolysis, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2643-2648
• /
• 2015

This paper analyzes the phenomenon of drain induced barrier lowering(DIBL) for doping profiles in channel of asymmetric double gate(DG) MOSFET. The DIBL, the important short channel effect, is described as lowering of source barrier height by drain voltage. The analytical potential distribution is derived from Poisson's equation to analyze the DIBL, and the DIBL is observed according to the change of doping profile to influence on potential distribution. As a results, the DIBL is significantly influenced by projected range and standard projected deviation, the variables of channel doping profiles. The change of DIBL shows greatly in the range of high doping concentration such as $10^{18}/cm^3$. The DIBL increases with decrease of channel length and increase of channel thickness, and with increase of bottom gate voltage and top/bottom gate oxide film thickness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.103-104
• /
• 2006

PRAM (Phase change Random Access Memory) is one of the most promising candidates for next generation Non-volatile Memories. The Phase change material has been researched in the field of optical data storage media. However, the characteristics required in solid state memory are quite different from optical ones. In this study, the reset current and temperature profile of PRAM cells with bottom electrode were calculated by the numerical method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1925-1930
• /
• 2014

This paper has analyzed the relation of conduction path and subthreshold swing for doping profile in channel of asymmetric double gate(DG) MOSFET. Since the channel size of asymmetric DGMOSFET is greatly small and number of impurity is few, the high doping channel is analyzed. The analytical potential distribution is derived from Possion's equation, and Gaussian distribution function is used as doping profile. The conduction path and subthreshold swing are derived from this analytical potential distribution, and those are investigated for variables of doping profile, projected range and standard projected deviation, according to the change of channel length and thickness. As a result, subthreshold swing is reduced when conduction path is approaching to top gate, and that is increased with a decrease of channel length and a increase of channel thickness due to short channel effects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.5
• /
• pp.571-577
• /
• 1989

In this paper, the double-refractive index profile, which is generalized a trapezoidal index profile, is proposed to study the characteristics of a optical fiber in the wave length 1.55um. Being compared with a triangle profile, it has many advantages over an optimum core radius, the minimum refractive index difference and the change of chromati dispersion characteristics with wavelength. Though the value of a varies from 2 to infinite, the same results are approximately obtained. Therefore, in fabrication of a fiber, the step part of trapezoidal index profile can replace the profile of a-power refractive index. Because the refractive index presented in this paper varies with a, it can be applied to multiple cladding fiber or segmented core fiber. And it is expected that the characteristics of the fiber are obtained.

• Journal of Life Science
• /
• v.9 no.6
• /
• pp.646-652
• /
• 1999

The effect of temperature on the structure change of the SH of myosin head have been investigated with improved resolution by x-ray diffraction using synchrotron radiation. The movement of myosin head and conformational change of contractile molecules were occurred in the muscle contraction. IASL (iodo acetamide) and MSL (maleimide) disordered the orderly helix arrangement of myosin in the rest state of spin level. The temperature effect on the structure change was great at the UL in the equatorial reflection. But those of IASL and MSL were minor. Equatorial reflection (10, 11) change inferred that myosin head was moved to the vicinity of actin filament by temperature change (from $25^{\circ}C$ to $0^{\circ}C$) at UL, but spin level was not changed. The intensity change of 143 $\AA$ and 72 $\AA$ could offer information of the mass profection of population of myosin heads along the filament axis. The slope of intensity profile of the mass profection of 143$\AA$ and reflection of MSL is appeared sharply and those of UL and IASL were not changed. The decrease of MSL actin reflection at 51 $\AA$ and 59 $\AA$ in the actin reflection change refers that the shifted myosin head binds a certain actin or changes an actin structure. From these results, we could conclude that IASL and MSL were spin labeled on SH of myosin head and disordered the helix arrangement of actin.

• Korean Journal of School Psychology
• /
• v.11 no.1
• /
• pp.253-274
• /
• 2014

The present study classified groups based on latent profile of self-determination motivation(amotivation, external motivation, intrinsic motivation), and examined the determinants for each group. The data was collected through panel data of Korea Education Longitudinal Study(KELS), total 5,459 participants who answered questionnaires of self-determination motivation of two times both second grade of middle school and second grade of high school. To identify the change motivational type, standardized residual was conducted using SPSS 17.0., and the latent classes for the change of motivational type was investigated using M-Plus in the frame work of Latent Profile Analysis(LPA). The results indicated that five groups(increase of self-determination, self-determination maintenance, self-determination developmental delay, elf-determination confusion, decrease of self-determination group) were classified based on latent profile. In addition, parental control, academic self-concept, teacher-student relationship, test anxiety, avoidance orientation, gender, father's education, and income were significantly related to each group. Lastly, the implications for directions of the adolescent counseling, limitations and future research are discussed.