• 대한치과의사협회지
• /
• 제44권12호통권451호
• /
• pp.816-829
• /
• 2006

The purpose of this study was to determine the level of perception and preference between dentists and lay people to altered facial profile. The assessors consisted of 40 dentists and 54 lay people, the survey was performed using questionnaire asking the order of perception and preference. The profiles presented in the questionnaire were based on the profile of one man and one woman, each morphed according to anterior or posterior direction of maxilla and mandible. The results were as follows. 1. In antero-posterior change of man and woman s profile, both dentists and lay people were sensitive to relatively skeletal profile (convex profile) changes than skeletal profile (concave profile) changes. 2. At least dentists needed to be perceived a 2 mm change in convex profile and a 3 mm change in concave profile and lay people needed to be perceived a 2 mm change in convex profile and a 3 mm change in concave profile for profile view. 3. Dentists are more sensitive in perception of man s profile change than lay people, but there is no significant differences between dentists and lay people in sensitivity of detection for woman s profile changes . 4. It seems that there is a general concordance between dentists and lay people in there perception of man s and woman s facial profile. This information might be clinician in comprehensive perception and preference of dentists and lay people to altered facial profile.

• 한국항만학회지
• /
• 제13권1호
• /
• pp.147-154
• /
• 1999

A Numerical model is developed in order to predict cross-shore beach profile change. In this model it is assumed that sediment transport is generated by waves(bed load transport suspended load transport) and undertow which is defined as offshore directional steady flow in the surf zone. In addition wave tank experiments which reproduce storm-surge were performed. By comparing resulting profile of calculation with experiments, the applicability of this method is verified.

• 상하수도학회지
• /
• 제20권3호
• /
• pp.461-467
• /
• 2006

The seasonal change in attached algae and microbial community structure at sedimentation basin of water treatment plant was investigated by using quinone profiles and denaturing gel gradient electrophoresis (DGGE). The photosynthetic bacteria and algae contains PQ-9 and VK-1 as major quinone are major component of the total quinone fraction in attached algae and microorganisms on sedimentation basin trough. The microorganisms containing menaquinones appear to be sensitivity to the change in temperature than those containing ubiquinones. The plot of the mole fraction of dominant quinone species ($f_d$) to the DQ values showed higher sensitivity to the seasonal change in the microbial community structure. The results indicated that quinone and DGGE are useful tool for the evaluation of the changes in the microbial community structure.

• Tribology and Lubricants
• /
• 제18권6호
• /
• pp.418-424
• /
• 2002

The basic concept of ‘gear profile modification’ is to change a part of the involute profile to reduce the load in that area and appropriate profile modifications can help gears to run quietly and resist scoring., pitting, and tooth breakage. In this study, the modification of tooth profile to make a smooth transmission of the normal loads in spur gears has been developed. The modified tooth profile has been determined by the total deflection at contact points. We also compared our results with other experimental results.

• 한국해안해양공학회지
• /
• 제8권1호
• /
• pp.95-102
• /
• 1996

Wells (1967)에 의해 제안된 2nd order 파랑들의 비선형 상호작용에 의한 바닥 부근에서의 유속분포에 대한 왜도(skewness)를 다시 계산하고 재평가하였다. 해안선에 수직한 방향의 퇴적물 이동 방향을 그 유속의 3차 모멘트(왜도)의 부호에 따라 알 수 있음을 보였고, 해빈이 어떤 교란을 받은 후에도 원래의 평형을 회복할 수 있는 새로운 개념의 중립수심을 제안하였다. 또한 계절적인 파랑조건의 변화에 따른 해빈단면의 변화(폭풍-너울 단면)도 종래의 단순한 파랑구배에 의한 구분보다는 파랑의 비선형 상호작용으로 설명되었다. 즉, 파랑의 비선형 작용이 강할 때에는 (폭풍파) 해빈은 침식을 받으며, 반면에 비선형작용이 약할 때에는 (너울파) 해빈은 퇴적됨을 보였다.

• 한국환경과학회지
• /
• 제16권5호
• /
• pp.533-539
• /
• 2007

The research was conducted to simulate and interpret the change of $PM_{10}$ profile by Asian dust using the CALPUFF modeling system for the period April 6 through 18, 2001. The results, which are represented a daily variation of $PM_{10}$ concentration before and after Asian dust, was located between a minimum concentration of $50{\mu}g/m^3$ and a maximum concentration of $100{\mu}g/m^3$, Most concentration peaks in the $PM_{10}$ profile were shown within a level below 500 m and had a pattern that rapidly increased up the peak and decreased after the peak to 1000 m. Even though the shapes of the vertical profile during Asian dust days were similar to non-Asian dust days, no rapid change vertically was observed. In particular, the vertical profile on 1200 LST and 1800 LST was noticeably shifted to the higher concentrations, which means $PM_{10}$ in the atmosphere was changed into a vertically and horizontally heterogeneous form under the Asian dust event. Finally, it is con-firmed that the simulation result from CALPUFF might schematically sketched atmospheric $PM_{10}$ profiles and their change by Asian dust throughout the comparison with profiles of aerosol extinction coefficients, which were acquired from Lidar measurement at KGAWO.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.259-266
• /
• 2002

The basic concept of 'tooth profile modification' is to change a part of the involute profile to reduce the load in that area and appropriate profile modifications can help gears to run quietly and resist scoring, pitting and tooth breakage. In this study, the modification of tooth profile to make a smooth transmission of the normal loads in spur gears has been developed. The modified tooth profile has been determined by the total deflection at contact points. We use the AGMA Standard to design basic gear profile, We also developed a gear design Program using tooth profile modification

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.202-211
• /
• 2002

The basic concept of 'tooth profile modification' to change a part of the involute profile to reduce the load in that area and appropriate profile modifications can help gears to run quietly and resist scoring, pitting and tooth breakage. In this study, the modification of tooth profile to make a smooth transmission of the normal loads in spur gears has been developed. The modified tooth profile has been determined by the total deflection at contact points. We use the AGMA Standard to design basic gear profile. We also developed a gear design program using tooth profile modification.

• 대한치과교정학회지
• /
• 제32권5호
• /
• pp.355-360
• /
• 2002

교정치료 후 연조직의 변화가 나타난다. 특히, 하안면부위에 많은 변화를 일으키게 되며, 대표적으로 입술은 치아 이동량의 $60\~70\%$정도 이동한다고 알려져 있다. 하지만, 이동량은 개인마다 그 양상이 다양하다. 본 연구는 환자의 입술두께에 따라 연조직 이동 양상에 차이가 있는지 여부를 조사하는데 그 목적이 있다. 발치를 동반한 교정치료를 받은 성인환자를 대상으로 basic upper lip thickness에 따라 환자를 분류한 결과, 두께가 얇은 군(group 1)에서 치료 후 연조직 변화에 영향을 미치는 요인으로는 mentolabial angle와 하순의 변화간에 음의 상관관계를 보였다. 두께가 평균인 군(group 2)에서 상순의 변화에 영향을 미치는 요소로는 상악전치의 변화, 하악전치의 변화, 하순의 변화, nasolabial angle의 변화로 나타났으며, 하순의 변화에 영향을 미치는 요소로는 상순의 변화, 상악전치의 변화, 하악전치의 변화로 나타났다. 두께가 두꺼운 군(group 3)에서 는 상순, 하순의 변화는 전치위치의 변화나 연조직 변화와는 관련 없음으로 관찰되었다.

• Macromolecular Research
• /
• 제11권4호
• /
• pp.236-240
• /
• 2003

Fabrication of a graded index profile was possible via photochemical reaction of cinnamoyl groups with 350 nm wavelength UV light to form crosslinked structures. Such structural change may induce the change in the refractive index. In order to generate graded index profile in the PMMA polymer optical fiber (POF) with cinnamoyl groups by photochemistry, a methyl methacrylate monomer containing a cinnamoyl functional group in the side chain were prepared. This monomer was then copolymerized with methyl methacrylate with various compositions not only to utilize advantages of poly(methyl methacrylate) but also to overcome the drawbacks of the cinnamate homopolymer. Changes of refractive indices were investigated with various contents of cinnamoyl group and varying irradiation time. Large change in the refractive index (${\Delta}{\approx}0.01$) and its proper profile shape ($g{\approx}2.2$) can be obtained by changing irradiation time.