• The Journal of Information Systems
• /
• v.24 no.4
• /
• pp.21-42
• /
• 2015

Purpose The high-technology market shows characteristics of a highly interdependent network market in both supply-side and demand-side, compared to other markets. Particularly, for convergence products, connectivity with related elements, as well as characteristics of innovation itself, is relatively important to the extent that they combine functions provided by several devices into a single device. Therefore, this study aims to identify whether network externality exists in value and adoption of a convergence product and discover a source of network externality, if any. Design/methodology/approach: Through a preceding research analysis and a literature review, 'social influence' and 'network size' have been drawn as direct network elements. On the other hand, general (comprehensive) concept compatibilities including 'intra-technology compatibility', 'inter-technology compatibility' and 'complementary-technology compatibility' are regarded as indirect network elements. Findings: Major findings are as followed;- First, it is shown that the factors influencing on perceived value of a convergence products are 'social influence' and 'network size' as the direct network elements and 'complementary-compatibility' among indirect network elements. Second, it is also found that 'intra-technology compatibility', 'inter-technology compatibility', 'complementary-compatibility' and 'perceived value' have significant effects on adoption of a convergence product. Particularly, it is known that 'complementary-compatibility' is an important source of network externality as it plays a decisive role in value judgment and has significant effects on perceived value. It is worthwhile to notice that this study comprehensively explains effects of network on high-tech products by structuring comparability as a multi-dimensional concept, as well as direct network elements.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.5
• /
• pp.45-51
• /
• 2018

Roll forming refers to the production of long plate-molded products, such as panels, pipes, tubes, channels, and frames, by continuously causing the bending deformation to thin plates using rotating rolls. As the roll forming method has advantages in terms of mass production because of its excellent productivity, the size of the roll forming industry has been continuously increasing and the roll forming method is increasingly being used in diverse industrial fields as a very important processing method. Furthermore, as the roll forming method mainly depends on the continuous bending deformation of the plate materials, the time and the cost of the heterogeneous materials developed in the process are relatively large when considered from the viewpoint of plastic working because many processes are continuously implemented. The existing studies on roll forming manufacturing have reported the loss of large amounts of time and materials when the raw materials or product types were changed; further, they have stated that the use of this method can hardly guarantee the uniformity of the formed shapes and the consistency in terms of size and cannot detect all the defects occurring during the mass production and related to the dimensions. Therefore, in this research, a real-time process data-based smart roll forming method that can be applied to multiple products was studied. As a result, a roll forming system was implemented that remembers and automatically sets the changes in the finely adjusted values of the supplied quantities of individual heterogeneous materials so that the equipment setting changing time for heterogeneous material replacements or changes in the products being produced can be shortened. It also secures the uniformity of the products so that more competitive and precise slide-rail products can be mass-produced with improvements in the quality, price, and productivity of the products.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.36-44
• /
• 2015

Objectives: This study aimed to elucidate the physicochemical properties of silica powder and airborne particles as by-products generated from fabrication processes to reduce unknown risk factors in the semiconductor manufacturing work environment. Materials and Methods: Sampling was conducted at 200 mm and 300 mm semiconductor wafer fabrication facilities. Thirty-two powder and airborne by-product samples, diffusion(10), chemical vapor deposition(10), chemical mechanical polishing(5), clean(5), etch process(2), were collected from inner chamber parts from process and 1st scrubber equipment during maintenance and process operation. The chemical composition, size, shape, and crystal structure of silica by-product particles were determined by using scanning electron microscopy and transmission electron microscopy techniques equipped with energy dispersive spectroscopy, and x-ray diffractometry. Results: All powder and airborne particle samples were composed of oxygen(O) and silicon(Si), which means silica particle. The by-product particles were nearly spherical $SiO_2$ and the particle size ranged 25 nm to $50{\mu}m$, and most of the particles were usually agglomerated within a particle size range from approximately 25 nm to 500 nm. In addition, the crystal structure of the silica powder particles was found to be an amorphous silica. Conclusions: The silica by-product particles generated from the semiconductor manufacturing processes are amorphous $SiO_2$, which is considered a less toxic form. These results should provide useful information for alternative strategies to improve the work environment and workers' health.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.36-40
• /
• 2016

Connectors transmit electric signals to different parts in compact mobile display products. As products that apply this have become lightweight and smaller in size, there are growing demands for smaller and more integrated connectors, which are internal parts of the products. As a measure to address these demands, there is the planar array connector that minimizes the part by arranging the single-direction BTB connectors to two directions. As connectors become smaller in size and more highly integrated, maintaining intensity to prevent defects during impact and maintaining adhesive force to smoothly transmit electric signals are growing in importance. Thus, in order to identify the impact of concave shaping on improving adhesive power in connector terminal pins as a method to increase the connecting power of planar array connector terminal pins, this study predicted and examined the concave shaping method, number of concave shapes, and the adhesive power according to the size of the concave shape through CAE. For concave shaping, the model that added concave shaping towards the lower part of the connector terminal pin and added spokes for the area pressed down by the concave shaping was 0.74 N, showing increased adhesive force compared to existing models. Furthermore, when applying two concave shaping, rather than just one, there was a tendency for adhesive force to increase. In the case of adhesive power trends according to the size of the concave shaping, adhesive power increased and the width of the concave shape decreased, and the biggest adhesive force trends were shown when the concave shaping depth was 0.01mm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.6
• /
• pp.1150-1163
• /
• 2016

This study makes use of meta-analysis to statistically integrate the quantitative results of individual research on the influence of fashion product attributes on purchase; in addition, this study utilizes the effect sizes of correlation coefficients. This study was based on 24 individual studies from January 2000 to March 2015. The meta-analysis analyzed 91 effect sizes and 24 studies and calculated the correlation coefficient effect sizes. A random effect model was employed for meta-analysis because the results for the homogeneity test indicated that the effect sizes of each research were heterogeneous. The analysis results are as follows. First, when the total effect sizes of the fashion product attributes that influence clothing purchase decisions were calculated as .256; this indicated that the effect size is slightly below the mid-sized level. Second, upon examining the effect sizes of the categorized fashion product attributes, the intrinsic attributes yielded .222, extrinsic factors yielded .235, and the compiled attributes yielded .420; this demonstrated that the compiled attributes have a larger effect size than individual attributes. Third, when they were measured by the characteristics of study targets, they were larger for a mixed-gender group than women as well as for ordinary citizens than university students. When the effect sizes were measured based on the characteristics of fashion products as suggested in the study, there were significant differences with respect to sportswear, followed by SPA brand clothing, general clothing, fashion accessories, and designer clothing. The cases where the clothing were purchased in non-retail stores were found to have a slightly larger effect size than those of offline retail stores when the effect sizes were measured based on purchase routes; however, the difference was not statistically significant. Next, an investigation of the trend of effect sizes based on published year via the meta regression analysis indicated slightly larger effect sizes as shown in more recent publications, but this was not statistically significant.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.35-40
• /
• 1986

The production process of a fine size fraction of Korean kaolin by ball milling is studied in this paper by analyzing the size distribution the size distribution of products with the Rosin-rammle formular and the rate process of cumulative size fractions with Alyavdin-Chujyo's formular. The size distribution is found to be divided in three regions a coarser part influenced by feed size an intermediate part where the size distribution shows a clear straight line relationship on Rosin-Rammler chart and the finest part with the ultimate limit of fineness by ball milling. Alyavdin-Chujyo's relationship is found to be valid over a very wide range of milling conditions. For different feed sizes the Alyavdin-Chujyo's relationship gives a group of straight lines with a common intersection point which can be defined as the limiting point of the persistent component region.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.11-46
• /
• 1996

The objectives of this research paper are to identify the types of the firm's new product development strategy and their characteristics about business strategy, to examine the effect of each type on new product outcomes, and to explore the contingency variable influencing the relationship between these types and new product outcomes. The result of the research are summarized as follows : First, in terms of both the resource allocation for product innovativeness and technology acquisition method, this study suggests 9 types of the firm's new product development strategies- Type 1 (pursuing low innovative products/relying on external technology), Type 2 (pursuing low innovative products oriented/relying on internal technology), Type 3 (pursuing low innovative products/relying on mixed technology), Type 4 (pursuing high innovative products/relying on internal technology), Type 6(pursuing high innovative products /relying on mixed technology), Type 7 (balancing low and high innovative products/relying on external technology), Type 8 (balancing low and high innovative products/relying on internal technology), Type 9 (balancing low and high innovative products/relying on mixed technology). Second, these 9 types are deeply associated with the firm's business strategic variables such as product differentiation and market differentiation, and exhibit different level of both technical and commercial performance of new products. Finally, the effects of these types on new product outcomes are different according to industrial environment and firms' characteristics with respect to size and technological capability.

• Korean Journal of Agricultural Science
• /
• v.43 no.3
• /
• pp.459-467
• /
• 2016

In Korea, the market size for environment-friendly agricultural products has reached a plateau, even though many Korean consumers still show a high level of preference for environment-friendly agricultural products. In order to solve this problem, some Korean farmers and marketers are starting to try to export their products to many countries, including China. China, in particular, is becoming one of the fastest rising market for Korean environment-friendly agricultural products, after the signing of the Free Trade Agreement with China. However, little research has been done or reported about the purchase behaviors of Chinese consumers. The purpose of this paper is to analyze the environment-friendly agricultural product purchase behavior (especially, mandarin orange and muskmelon) of consumers in the Chinese market and to present some useful implications for Korean farmers and marketers. Through survey in China (especially, Beijing and Shanghai) and frequency analysis, this study made the following findings: first, Chinese consumers show a very strong concern for environment-friendly agricultural products. Second, many Chinese consumers usually buy environment-friendly agricultural products more than two times per month. Third, Chinese consumers give more value to freshness and food-safety than taste when they make decisions on buying environment-friendly mandarin orange and muskmelon. These can have some implications for the exportation of environment-friendly agricultural products.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.81-86
• /
• 1999

Nowadays, as the development period of new products becomes shorter and consumer's requirement is more various, the importance of Rapid Protytyping Technology has been rapidly increased. Rapid Protytyping makes protytypes or functional parts directly using the 3D CAD data. But RP machines can make protytype in limit size. But RP machines can make protytype in limit size. For making large size protytype, we slice solid, which is made of STL file, and then glue sliced solid. This paper is concerned with slicing solid on STL file.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.85-86
• /
• 2007

As the manufacturing capacity needs for large size LCD TV shifts very fast into next generation, equipment manufactures face more challenges in development of the systems which can accommodate productivity, reliability and high process quality requirements from the panel makers. AKT committed to continue its contribution to the growth of the LCD market by providing excellent PECVD products. The cost containment and performance improvement are key challenges for large size processing equipment development and this presentation discusses various challenges and AKT's solutions in developing large size PECVD equipment beyond Gen. 8.