• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.12
• /
• pp.1813-1821
• /
• 2002

The aim of this study was to identify useful secondary traits for estimating genetic ability of milk production traits. We investigated the value of using plasma metabolites concentrations. Two hundred and nineteen cattle out of 271 had only milk production traits records (G1), 33 had only metabolites records (G2), and 19 had both milk production traits and metabolites records (G3). Fifty two calves with metabolites records (G2 and G3) were born from 1992 to 1997. Forty three calves (29 females, 14 males) were used from 10 to 90 d of age and the others (3 females, 6 males) from 10 to 60 d of age. A total of 566 records of milk yield, fat yield and protein yield for 240 to 305 d on 238 heads (G1 and G2) were collected The collected blood samples were divided into three age groups: AG1, 10 to 30 d; AG2, 40 to 60 d; and AG3, 70 to 90 d. Heritabilities of milk yield, fat yield and protein yield were $0.45{\pm}0.04$, $0.50{\pm}0.04$ and $0.38{\pm}0.04$, respectively. Heritability of plasma glucose concentration at AG1 was $0.45{\pm}0.08$. Genetic correlations between plasma glucose concentration and milk yield, fat yield and protein yield were -$0.35{\pm}0.28$, $0.64{\pm}0.24$ and $0.36{\pm}0.35$, respectively. When the plasma glucose concentration at AG1 was used to estimate genetic ability of these milk production traits, reliability of milk yield of animals without milk record increased 8.2%, fat yield increased 24.2% and protein yield increased 9.5%. Heritability of plasma total cholesterol concentration at AG3 was $0.83{\pm}0.04$. Genetic correlation between plasma total cholesterol concentration and milk yield, fat yield and protein yield were $0.58{\pm}0.21$, $0.42{\pm}0.20$ and $0.45{\pm}0.22$, respectively. When the plasma total cholesterol concentration at AG3 was using to estimate genetic ability of these milk production traits, reliability of milk yield of animals without milk record increased 19.0%, fat yield increased 9.6%, and protein yield increased 13.5%. The annual genetic gain is in proportion to the reliability of selection. These results show that the plasma metabolite concentrations would be useful for improvement of genetic ability for milk production traits in the genetic improvement in herd of cows, where half of the animals selected are from a herd without its own milk record.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.1
• /
• pp.123-126
• /
• 1993

Hand dibbling in rows produced higher (p < 0.05) fresh and dry matter (DM), fodder yield, higher plant density and cob yield than broadcasted. However, the varying seed rates (40, 50 and 55 kg/ha) did not affect (p < 0.05) the fresh and DM yield and cob yield except for 30 kg/ha seed rate which produced the lowest (p < 0.01). However, the overall average fresh fodder yield and the fresh and DM yield of cob were 24.97, 10.04 and 6.90 t/ha respectively. The overall average plant height (cm), cob/plant (nos.) plant/ha, (nos.) cob/ha (nos.) and weight (g) of one cob were 178, 1.11, 664141, 70104 and 145 respectively for both the sowing methods and the four seed rates. Crude protein contents of maize plant and cob by-products (8.12% and 7.34% respectively) indicated promising cattle feeds along with human food.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.11
• /
• pp.1516-1519
• /
• 2001

The data consisted of 369 lactation records for calvings over a sixteen-year period (1972-1987) and included only cows that had normal milk records. The data were analysed using a linear model containing the fixed effects of parity, year of calving and season of calving. The least squares means${\pm}$S.E. were $1,273{\pm}58.4kg$ for milk yield, and for post-partum body weight (kg) at 2, 3 and 4 months after calving were $343.40{\pm}3.96$, $346.10{\pm}4.10$ and $352.54{\pm}4.26$, respectively. With the exception of season of calving, the effects of parity and year of calving were significant (p<0.01) on the performance of the animals. Thus, the mean-milk yields 1162, 1351 and 1350, were similar for pre-, peak- and post rainy seasons, respectively. On the other hand, as parity increased from 1 to 3, milk yield also increased, but thereafter, there was a gradual decline in milk yield. Similarly, post-partum body weight also increased with parity. However, no consistent pattern for year effect was observed which probably was a reflection of the variation in climatic conditions, or forage quality and/or availability. The phenotypic correlations between milk yield and post-partum body weights were negative and small (ranging from -0.01 to -0.08). However, high milk production in cows was associated with longer calving interval. The implications from the phenotypic correlations are suggestive of one or two possibilities. Firstly, selection for increased body weight may actually result in decreased milk yield. Also, a substantial genetic antagonism may exist between milk yield and fertility in the crossbred cows. Therefore, it is important that selection to improve milk production should take into consideration the reproductive performance of the cows.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.317-317
• /
• 2017

We performed this experiment to select high quality rice adapted to wheat-rice double cropping system. We sowed barley and wheat seed in November 2, 2015. After harvesting barley and wheat, we transplanted high quality rice cultivars: 'Unkwang', 'Hopun', 'Haepum', 'Hyunoum' in June 17 and 24. We used 'sindongjin' rice as a control. As a result, 'Hyunpum' had a highest head rice yield regardless of transplanting date. Head rice yield of 'Hyunpum' was 488.1kg/10a when transplanted in June 17, and 453.6kg/10a when transplanted in June 24. The reason for this highest head rice yield was not percentage of head rice but milled rice yield. Milled rice yield of 'Hyunpum' was 526.5kg/10a when transplanted in June 17, and 490.0kg/10a when transplanted in June 24. Percentage of head rice had little differences between rice cultivars. Among yield components, only number of panicle per $m^2$ had an effect on the differences of yield between rice cultivars. The other yield components didn't have an effect on the differences of yield between rice cultivars. Compared to June 17, only 'Unkwang' had higher head rice percentage and head rice yield in June 24. Head rice percentage of 'Unkwang' changed from 67.3% to 85.0% and head rice yield changed from 324kg/10a to 393.8kg/10a when transplanting date delayed from June 17 to June 24. When transplanting date was delayed, heading date of 'Unkwang' was more delayed than other rice cultivars. By delay of heading date, mean temperature for 40days changed from $25.0^{\circ}C$ to $22.9^{\circ}C$ which improved temperature condition during grain filling stage. This improved head rice percentage and head rice yield of 'Unkwang' transplanted in June 24. If transplanting date is more delayed than June 24, 'Unkwang' could have higher head rice percentage and head rice yield. Therefore, if you transplant rice before June 24 in rice-wheat double cropping system, 'Hyunpum' is recommended as adequate rice cultivar. But if you transplant rice after June 24, further research is needed to find out adequate rice cultivar.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.353-353
• /
• 2017

Rice yield of South Korea in 2015 was the highest of the last 30 years. It is important issue to establish food policy whether the historically highest yield in 2015 can be continued or just one-off event. Therefore, it is necessary to understand whether such a high yield as 2015 will be reoccurred. The aim of this study was to find out what climatic factor affect rice yield and how often these climatic factor could occur. For this study, the yield monitoring data from National Institute of Crop Science, Rural Development Administration and the meteorological data provided by Korea Meteorological Administration are used to identify the weather conditions could cause high yield, and how often these conditions occurred in the past. Our results indicated that such as high yield as 2015 could occur only when the mean sunshine hours of July and the mean sunshine hours from the end of August to early September was more than 5.1 hours and 6 hours, respectively. Mean sunshine hour of July may be related to grain number. The mean sunshine hour from the end of August to early September was presumed to relate to grain filling ratio. The relationship between monthly mean temperature and yield or yield component was not clear in this study. In this study, any cycle of high weather condition was not found. Therefore, the probability of high yield weather condition was expressed by frequency. The frequency of the sunshine hour, could make high yield, were 8/35 (23%) over the past 35 years. And the frequency of two years consecutive sunshine hour condition, which could cause high yield, was 1/35 (2.9%). The frequency of recurrence of sunshine hour making high yield within the next 5 years or 10 years after high yield weather condition were 4/35 (11.4%). After all, the high yield as much as yield of 2015 could not be one-off event. But it was not also consecutive event.

• Journal of Animal Science and Technology
• /
• v.64 no.1
• /
• pp.143-154
• /
• 2022

This study was conducted to evaluate the relationship among market weight, slaughter age, yield grade, and primal cut yield in Hanwoo. A total of 403 Hanwoo (Korean native cattle) was assessed for carcass traits such as carcass cold weight, backfat thickness, ribeye area, dressing percentage, yield index, and marbling score. The production yield of the individual major primal cuts of Hanwoo beef was also measured. Carcass cold weight, ribeye area, and backfat thickness, which affect meat quality increased with increased market weight (p < 0.05). The production yield of the ten major primal cuts also increased with increased market weight (p < 0.05). In terms of slaughter age, carcass cold weight, ribeye area, and backfat thickness all increased from 25 months to 28-29 months, and the production yield of all prime cuts also increased with increasing slaughter age. According to the meat yield grade, carcass cold weight and backfat thickness increased from grade A to grade C, although the ribeye area was not affected. The combined findings of the study suggest that slaughtering Hanwoo at the weight of 651-700 kg and 701-750 and age of 28.23 and 29.83 months could be desirable to achieve the best quality and quantity grade of Hanwoo beef. However, the positive correlation of carcass cold weight and backfat thickness, and the negative correlation of the yield index according to primal cuts yield indicated that it is necessary to couple the slaughtering management of cattle with improved genetic and breeding method of Hanwoo to increase the production yield of the major prime cuts of Hanwoo beef.

• Nuclear Engineering and Technology
• /
• v.31 no.4
• /
• pp.365-374
• /
• 1999

A nuclear design of fission moly production targets for a research reactor, HANARO was peformed. It was found that the use of MCNP-4A, ORIGEN-2 code was reliable for the analysis of production characteristics of $^{99}$ Mo in a target fuel at an irradiation holes. A parametric study was done for the optimization of target location, target dimension, target shape and fuel materials. It was shown that a fuel thickness was the most sensitive parameters and electro-deposited target gave the highest 99Mo yield ratio. A pellet target with vibro-compaction powder, however, showed the largest production capacity and better engineering feasibility even with less yield ratio. Ten kinds of optimized target design for both LEU and HEU satisfied all the given design constraints. The most favorable design was the HEU ring-shaped electro-deposited target, considered the safety limit, production yield, chemical process easiness, yield ratio, and amount of radioactive waste.

• Advances in Energy Research
• /
• v.8 no.4
• /
• pp.233-241
• /
• 2022

Biodiesel is a non-polluting and non-toxic energy source that can replace conventional diesel. However, the higher production cost and raw material scarcity became challenges that obstruct the commercialization of biodiesel production. In the current investigation, fried cooking oil is used for biodiesel production in a hydrodynamic cavitation reactor, thus enhancing raw material availability and helping better waste oil disposal. However, due to the cavitation effect inside the reactor, the hydrodynamic cavitation reactor can give biodiesel yield above 98%. Thus, the use of orifice plates (having a different number of holes for cavitation) in the reactor shows more than 90% biodiesel yield within 10 mins of a time interval. The effects of rising temperature at different molar ratios are also investigated. The five-hole plate achieves the highest yield for a 4.5:1 molar ratio at 65℃. And the similar result is predicted by the response surface methodology model; however, the optimized yield is obtained at 60℃. The investigation will help understand the effect of hydrodynamic cavitation on biodiesel yield at different molar ratios and elevated temperatures.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.2
• /
• pp.73-78
• /
• 2005

Demand for the domestic hairy vetch seed production will be increased with the increasing interest of environment-friendly agriculture in Korea. This study was conducted during from 2000 fall to 2003 spring at upland field of National Institute of Crop Science in Suwon, Korea to compare wheat and triticale (TC) as stake crop of hairy vetch (HV), and to know proper seeding rates and ratios between TC and HV for the maximum HV seed production. As supporting crop of HV, TC was superior to wheat at the points of higher HV seed yield, stronger TC stalk for supporting, consistence of ripening stage of two seeds. In seeding method, row seeding was superior to broadcast seeding at the points of less lodging and higher HV seed yield. HV seed yield decreased with the increase of TC seeding rate in mixture cropping (row seeding), particularly at TC seeding rates over 5kg/10a. HV seed yield increased with the increase of HV seeding rate at the condition of TC seeding rates under 5kg/10a in spite of higher lodging of mixed crops at higher HV seeding rate due to higher HV aboveground dry matter. Maximum HV seed yield was obtained at TC seeding rate of $1\~1.5kg/10a$ as indicating HV seed yield 176kg/l0a (CV. Madison) at seeding rate of TC 1kg/10a + HV 2 kg/10a in 2001, and HV seed yield 96kg/10a (CV. Common) at seeding rate of TC 1.5kg/10a + HV 4.5kg/10a in 2003. Use of all-purpose combine harvester for harvesting and appliance for separation of mixed seeds using centrifugal force, which are prerequisite for HV seed production, was excellent in the simultaneous seeds production system of HV and TC.

• Food Science of Animal Resources
• /
• v.25 no.3
• /
• pp.328-332
• /
• 2005

The effect of k-casein (k-CN) variant on milk production traits (milk yield, fat yield, protein yield, fat percentage and protein percentage) was estimated for 568 Holstein cows in the first lactation. The k-CN valiant were determined by PCR-RFLP (restriction fragment length polymorphism) technique at the DNA level. Single trait linear model was used for the statistical analysis of the data. Result of this study indicated that k-CN variant affected significantly milk yield (P<0.05) and protein yield (P<0.01). Animals with the BB variant produced 622kg milk more and had protein yield higher by 32kg compared with animals with the AA variant No associations between the k-CN variants and other milk production trait were found. Therefore, milk and protein yield may be improved through milk protein typing by increasing the frequencies of k-CN B variant in dairy cattle population. In cheese making, it will be also preferable to have milk with the B variant of k-CN, which gives higher yield having a better quality than the A variant milk.